Establishment profile
GENERAL WELDING & FABRICATING INC.
991 MAPLE ROAD, ELMA, NY, 14059
Operated by General Welding & Fabricating Inc
332439 — Other Metal Container Manufacturing
EIN 161355407
Summary
GENERAL WELDING & FABRICATING INC. has accumulated 10 OSHA violations across 5 inspections over 14 years of recorded history, with $12,315 in total assessed penalties.
The establishment sits in the 65th percentile for violations within its industry-state peer group of 76 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GENERAL WELDING & FABRICATING INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
60% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $12,315 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C04 I | 1 | 1 | $4,950 | Mar 2025 | Mar 2025 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $3,515 | Feb 2023 | Feb 2023 |
| 29 CFR 1910.0184 E03 I | 1 | 1 | $1,400 | Feb 2012 | Feb 2012 |
| 29 CFR 1910.0215 B05 | 1 | 1 | $1,400 | Feb 2012 | Feb 2012 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | $1,050 | Feb 2012 | Feb 2012 |
| 29 CFR 1904.0032 B03 | 1 | 1 | — | Mar 2025 | Mar 2025 |
| 29 CFR 1910.0147 C07 I A | 1 | 1 | — | Mar 2025 | Mar 2025 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Feb 2023 | Feb 2023 |
| 29 CFR 1910.1200 G08 | 1 | 1 | — | Feb 2023 | Feb 2023 |
| 29 CFR 1910.0184 E03 II | 1 | 1 | — | Feb 2012 | Feb 2012 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3324 within NY. Peer group: 76 employers. This establishment has 10 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 58 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL WELDING & FABRICATING INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL WELDING & FABRICATING INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GENERAL WELDING & FABRICATING INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GENERAL WELDING & FABRICATING INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL WELDING & FABRICATING INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GENERAL WELDING & FABRICATING INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL WELDING & FABRICATING INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefensePROCUREMENT OF TWO JOINT THREAT EMITTER (2) MOBILE COMMAND AND CONTROL TRAILERS ONLY.contract · Last action 2020-03-13$184,700
- Department of DefenseAIR SUPPLY ASS PART NUMBER: GA129contract · Last action 2024-03-18$34,447
- General Services AdministrationAUTOMOTIVE REPAIRScontract · Last action 2021-01-21$14,862
- General Services AdministrationAUTOMOTIVE REPAIRScontract · Last action 2021-01-21$14,862
- Department of DefenseWELDING INSPECTIONcontract · Last action 2021-11-02$13,300
- Department of Defense8506697808!CHAIN ASSEMBLY,SINGcontract · Last action 2019-08-23$11,066
- Department of DefenseIGF::OT::IGF REPAIR OF MOBILE COMMAND AND CONTROL UNIT TRAILER, NSN 5895-01543-4728. CONTRACTOR SHALL REMOVE AND REPLACE TRAILER TOWING TONGUE STRUCTURE AND SUPPORTS, REPAINTING OF THE REPAIRED ARREA, REMARKING OF THE REPAIRED AREA, REWIRING OF THE REPAIR, INSTALLATION OF IUID PLATE.contract · Last action 2016-01-22$8,500
- General Services AdministrationVEHICLE REPAIR IGF::OT::IGFcontract · Last action 2017-09-14$6,720
- Department of DefenseAIR SUPPLY ASS PART NUMBER: GA129contract · Last action 2014-04-21$6,440
- Department of DefenseSNOW PLOW FOR MISSISSINEWA LAKEcontract · Last action 2014-08-15$5,935
- Department of Veterans AffairsSNOW REMOVAL EQUIPMENT FOR A DEPT OF VETERANS AFFAIRS MEDICAL FACILITYcontract · Last action 2013-12-17$4,400
- Department of Veterans Affairs14 FOOT SNOWDOG PUSHER BOX 14 FOOT FOR LOADERcontract · Last action 2014-12-11$4,200
- Department of Defense8506697567!CHAIN ASSEMBLY,SINGcontract · Last action 2019-07-25$3,952
- Department of Veterans AffairsLOGISTICS WELDING ON BACKHOE BUFFALOcontract · Last action 2010-09-17$3,200
Federal contract dollars to this establishment. Primary NAICS: 336212 - TRUCK TRAILER MANUFACTURING. Last action: 2024-03-18. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-02-18 | Planned | 3 | 2 | $4,950 | |
| 2023-09-06 | Follow-up | 0 | — | $0 | |
| 2022-11-17 | Planned | 3 | 3 | $3,515 | |
| 2017-08-14 | Referral | 0 | — | $0 | |
| 2012-01-27 | Complaint | 4 | 4 | $3,850 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
GENERAL WELDING & FABRICATING INC. is one of 1 establishments rolled up under the parent organization General Welding & Fabricating Inc.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of General Welding & Fabricating Inc across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in other metal container manufacturing within NY, ordered by federal enforcement volume:
- ERIE ENGINEERED PRODUCTS, INC.LANCASTER — 3 federal enforcement records
- ERIE ENGINEERED PRODUCTS, INCNORTH TONAWANDA — 2 federal enforcement records
- SENTRY METAL SERVICES, INC.NIAGARA FALLS — 1 federal enforcement record
- SKYDYNE COMPANYPORT JERVIS — 1 federal enforcement record
- JAMESTOWN BRONZE WORKS, INC.JAMESTOWN — 1 federal enforcement record
- 5 STAR WASHER SERVICE, INC.ALBION — 1 federal enforcement record
- STEVE'S SHEET METAL/SAGE ENTERPRISES, INC.WOODSIDE — 1 federal enforcement record
- THE SKYDYNE COMPANYPORT JERVIS — 1 federal enforcement record
- DORTRONICS SYSTEMS, INC.SAG HARBOR — 1 federal enforcement record
- REYNOLDS TECH FABRICATORS INCEAST SYRACUSE — 1 federal enforcement record
Related searches
- All General Welding & Fabricating Inc locationsParent rollup
- Other Metal Container ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- Other Metal Container in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GENERAL WELDING & FABRICATING INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup General Welding & Fabricating Inc.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GENERAL WELDING & FABRICATING INC.'s OSHA violation history?
- GENERAL WELDING & FABRICATING INC. has 5 OSHA inspections on record with 10 violations and $12,315.25 in total penalties.
- How does GENERAL WELDING & FABRICATING INC.'s safety record compare to its industry?
- GENERAL WELDING & FABRICATING INC. operates in the other metal container manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 5. GENERAL WELDING & FABRICATING INC.'s self-reported DART rate is 5.74 compared to an industry average of 2.6.