Skip to main content

Establishment profile

GENERAL THERMODYNAMICS, INC.

1025 INDUSTRIAL ROAD, IRON RIDGE, WI, 53035
332410Power Boiler and Heat Exchanger Manufacturing

Download as PDF →

OSHA inspections
7
over 35 years
Violations
16
$9,831 in penalties
Penalties
$9,831
$614 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
4 National Emphasis Program inspections · 1 OSHA follow-up

Summary

GENERAL THERMODYNAMICS, INC. has accumulated 16 OSHA violations across 7 inspections over 35 years of recorded history, with $9,831 in total assessed penalties.

The establishment sits in the 64th percentile for violations within its industry-state peer group of 77 employers. Inspection frequency runs at the 80th percentile. The most recent enforcement activity was recorded 15 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GENERAL THERMODYNAMICS, INC. appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
7
0.2 / yr · last 35 yrs
Violations
16
0.5 / yr
Penalties
$9,831
$614 avg / violation
56% serious44% other
Inspection trigger · planned
4 of 7
Inspection trigger · complaint
3 of 7

86% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 16 citations in this view · $9,831 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A0122$3,018Jul 2007Dec 2010
29 CFR 1910.1000 A0211$1,625May 2005May 2005
29 CFR 1910.0132 A11$1,625May 2005May 2005
29 CFR 1910.0217 C02 ID11$938Mar 2003Mar 2003
29 CFR 1910.0212 A03 II11$938Mar 2003Mar 2003
29 CFR 1910.0147 C06 IB11$938Mar 2003Mar 2003
29 CFR 1910.0255 B0411$750Jul 2007Jul 2007
29 CFR 1910.1000 E11May 2005May 2005
29 CFR 1910.0134 C0111May 2005May 2005
29 CFR 1910.0132 D01 I11May 2005May 2005
29 CFR 1910.0147 D04 I11Mar 2003Mar 2003
29 CFR 1910.0147 C07 I11Mar 2003Mar 2003
29 CFR 1910.0217 C02 IB11Mar 2003Mar 2003
29 CFR 1910.0022 D0111Jan 2001Jan 2001
29 CFR 1910.0147 C06 II11Jun 1992Jun 1992

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

64th

Above average violations in NAICS 3324 within WI. Peer group: 77 employers. This establishment has 16 OSHA violations; peer median is 8.

Fewer violationsMore violations
Penalty percentile
62nd
peer median: $5,198
Inspection frequency
80th
peer median: 4

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for GENERAL THERMODYNAMICS, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.2
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Complaint
3

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL THERMODYNAMICS, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
15 years ago

No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL THERMODYNAMICS, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GENERAL THERMODYNAMICS, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

Company-level in WI — for GENERAL THERMODYNAMICS, INC., not this location alone

Total cases
1
Unfair labor practice
1

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other GENERAL THERMODYNAMICS, INC. locations in the same state.

NLRB cases

National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 1 case · 1 ULP

Case numberTypeFiledClosedStatusRegion
30-CA-016741Unfair labor practiceFeb 2004Apr 2004ClosedRegion 18, Minneapolis, Minnesota

Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL THERMODYNAMICS, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GENERAL THERMODYNAMICS, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL THERMODYNAMICS, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2010-11-10Complaint11$2,268
2007-05-16Planned2$1,500
2005-02-15Complaint53$3,250
2003-03-14Planned65$2,813
2000-10-23Complaint1$0
1992-06-04Planned1$0
1990-10-12Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in power boiler and heat exchanger manufacturing within WI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GENERAL THERMODYNAMICS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GENERAL THERMODYNAMICS, INC.'s OSHA violation history?
GENERAL THERMODYNAMICS, INC. has 7 OSHA inspections on record with 16 violations and $9,830.5 in total penalties.
How does GENERAL THERMODYNAMICS, INC.'s safety record compare to its industry?
GENERAL THERMODYNAMICS, INC. operates in the power boiler and heat exchanger manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.2.