Skip to main content

Establishment profile

GENERAL PARTITIONS MANUFACTURING CORPORATION

1702 PENINSULA DRIVE, ERIE, PA, 16505
332321Metal Window and Door Manufacturing

Download as PDF →

OSHA inspections
7
over 40 years
Violations
62
$23,556 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
2 National Emphasis Program inspections · 2 OSHA follow-ups

Summary

GENERAL PARTITIONS MANUFACTURING CORPORATION has accumulated 62 OSHA violations across 7 inspections over 40 years of recorded history, with $23,556 in total assessed penalties.

The establishment sits in the 98th percentile for violations within its industry-state peer group of 979 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GENERAL PARTITIONS MANUFACTURING CORPORATION appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
7
0.2 / yr · last 40 yrs
Violations
62
1.6 / yr
Penalties
$23,556
$380 avg / violation
79% serious21% other
Inspection trigger · planned
3 of 7
Inspection trigger · complaint
2 of 7

57% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 28 citations in this view · $18,856 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II22$6,000Mar 1992Oct 2007
29 CFR 1910.0212 A0122$1,151Mar 1992Mar 2004
29 CFR 1910.0213 B0322$850Mar 1992Oct 2007
29 CFR 1910.0217 B04 I22$720May 1986Mar 1992
29 CFR 1910.0217 E01 I22$600May 1986Mar 1992
29 CFR 1910.0215 B0922$350Mar 1992Mar 2004
29 CFR 1910.0219 F0322Mar 1992Oct 2007
29 CFR 1910.0303 G01 II22Mar 1992Mar 2004
5A000111$1,050Mar 1992Mar 1992
29 CFR 1910.0332 B0111$850Mar 1992Mar 1992
29 CFR 1910.0106 E02 IVD11$850Mar 1992Mar 1992
29 CFR 1910.0147 C0111$850Mar 1992Mar 1992
29 CFR 1910.0212 A03 III11$850Mar 1992Mar 1992
29 CFR 1910.0217 C02 IB11$850Mar 1992Mar 1992
29 CFR 1910.0217 B08 I11$850Mar 1992Mar 1992
29 CFR 1910.0212 A0211$615Oct 2007Oct 2007
29 CFR 1910.0147 C04 II11$610Oct 2007Oct 2007
29 CFR 1910.0178 L0511$610Oct 2007Oct 2007
29 CFR 1910.0151 B11$600Mar 1992Mar 1992
29 CFR 1910.0215 A0411$600Mar 1992Mar 1992

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

98th

Worse on violations than nearly every other employer in NAICS 3323 within PA. Peer group: 979 employers. This establishment has 62 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
94th
peer median: $1,785
Inspection frequency
88th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.9
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
2
Follow-up
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
3309331
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL PARTITIONS MANUFACTURING CORPORATION. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2007-07-05Complaint1412$3,185
2004-03-16Planned64$1,251
1998-08-24Planned0$0
1992-05-19Follow-up0$0
1992-01-21Complaint3830$19,000
1986-06-06Follow-up0$0
1986-01-09Planned43$120

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal window and door manufacturing within PA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GENERAL PARTITIONS MANUFACTURING CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GENERAL PARTITIONS MANUFACTURING CORPORATION's OSHA violation history?
GENERAL PARTITIONS MANUFACTURING CORPORATION has 7 OSHA inspections on record with 62 violations and $23,556 in total penalties.
How does GENERAL PARTITIONS MANUFACTURING CORPORATION's safety record compare to its industry?
GENERAL PARTITIONS MANUFACTURING CORPORATION operates in the metal window and door manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.