Skip to main content

Establishment profile

GENERAL MAGNAPLATE CORPORATION

1331 W. EDGAR RD, LINDEN, NJ, 07036
332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
EIN 221641813

Download as PDF →

OSHA inspections
9
over 49 years
Violations
27
$3,840 in penalties
Penalties
$3,840
$142 avg
Accident investigations on record
1 National Emphasis Program inspections · 1 OSHA follow-up

Summary

GENERAL MAGNAPLATE CORPORATION has accumulated 27 OSHA violations across 9 inspections over 49 years of recorded history, with $3,840 in total assessed penalties.

The establishment sits in the 82nd percentile for violations within its industry-state peer group of 89 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 9 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GENERAL MAGNAPLATE CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
9
0.2 / yr · last 49 yrs
Violations
27
0.6 / yr
Penalties
$3,840
$142 avg / violation
52% serious48% other
Inspection trigger · planned
5 of 9
Inspection trigger · referral
2 of 9

56% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $3,840 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0094 D09 VIII22Aug 1977Apr 1988
29 CFR 1904.0039 A0211$1,890Jan 2017Jan 2017
29 CFR 1910.0107 C0611$350Apr 1988Apr 1988
29 CFR 1910.0022 A0111$200Apr 1988Apr 1988
29 CFR 1910.0307 B11$200Apr 1988Apr 1988
29 CFR 1910.1200 H11$200Apr 1988Apr 1988
29 CFR 1910.0213 H0111$150Apr 1988Apr 1988
29 CFR 1910.0094 D09 VI11$150Apr 1988Apr 1988
29 CFR 1910.0094 D09 VII11$150Apr 1988Apr 1988
29 CFR 1910.0023 C0111$100Apr 1988Apr 1988
29 CFR 1910.0094 D09 IV11$100Apr 1988Apr 1988
29 CFR 1910.0094 D09 V11$100Apr 1988Apr 1988
29 CFR 1910.0106 E06 II11$100Apr 1988Apr 1988
29 CFR 1910.0215 A0211$100Apr 1988Apr 1988
29 CFR 1910.0219 D0111$50Apr 1988Apr 1988
29 CFR 1910.0107 B05 I11May 1992May 1992
29 CFR 1910.0147 C04 I11May 1992May 1992
29 CFR 1910.0020 G0211Apr 1988Apr 1988
29 CFR 1910.0219 E01 I11Apr 1988Apr 1988
29 CFR 1910.0094 D09 XI11Apr 1988Apr 1988

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

82nd

Worse on violations than most other employers in NAICS 3328 within NJ. Peer group: 89 employers. This establishment has 27 OSHA violations; peer median is 8.

Fewer violationsMore violations
Penalty percentile
40th
peer median: $5,500
Inspection frequency
93rd
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−3.1
TRIR
0.0
vs industry
−4.1

Reported for 40 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
3.1
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Accident
1
Referral
2
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Sep 2016

Reports
1
Hospitalizations
1
Amputations
1
Eye losses
0

Most frequent event: Compressed or pinched by shifting objects or equipment

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Sep 22, 2016Compressed or pinched by shifting objects or equipmentFingertip(s)Amputation

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
9 years ago

No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL MAGNAPLATE CORPORATION. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GENERAL MAGNAPLATE CORPORATION. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GENERAL MAGNAPLATE CORPORATION. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL MAGNAPLATE CORPORATION. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GENERAL MAGNAPLATE CORPORATION. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities · 2 marked inactive.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
GENERAL MAGNAPLATE CORPORATION
1331 W. EDGAR RD · LINDEN, NJ, 07036
AirNo Violation Identified00Jan 2020View →
GENERAL MAGNAPLATE CORP
1331 US ROUTE 1 · LINDEN, NJ, 07036
00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL MAGNAPLATE CORPORATION. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$413K
Awards
27
Top agency
Department of Defense
$413K
Company-wide — GENERAL MAGNAPLATE CORPORATION (across 3 entities)
Obligated (5-yr)
$138K
Obligated (all-time)
$552K
Awards (all-time)
31

Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.

Largest awards
  • Department of Defense
    FSC: 7777 NAME: SERVICE- CROSS PART NUMBER:
    contract · Last action 2019-03-20
    $103,463
  • Department of Defense
    FSC: 7777 NAME: SERVICE CONTRA PART NUMBER: IGF::CT::IGF
    contract · Last action 2019-03-20
    $88,984
  • Department of Defense
    HARD COAT ANODIZE
    contract · Last action 2014-03-19
    $39,350
  • Department of Defense
    REMOVAL AND APPLICATION OF NEDOX FM-5
    contract · Last action 2019-03-08
    $28,924
  • Department of Defense
    IGF::OT::IGF NEDOX COATING BOTTOM PLATES
    contract · Last action 2013-06-27
    $18,021
  • Department of Defense
    FARMOUT
    contract · Last action 2009-05-20
    $16,919
  • Department of Defense
    SERVICE, NEDOX
    contract · Last action 2012-10-01
    $15,247
  • Department of Defense
    SERVICES
    contract · Last action 2011-12-29
    $11,435
  • Department of Defense
    SERVICES, NEDOX
    contract · Last action 2012-02-23
    $10,624
  • Department of Defense
    BPA WEB TOOL. CALL.
    contract · Last action 2016-02-16
    $10,095
  • Department of Defense
    IGF::OT::IGF SERVICE-NEDOX
    contract · Last action 2016-06-28
    $9,426
  • Department of Defense
    IGF::OT::IGF COATING
    contract · Last action 2014-04-08
    $9,426
  • Department of Defense
    COATING (NEDOX) FARMOUT 10 EA DOLLIES
    contract · Last action 2010-09-29
    $8,905
  • Department of Defense
    MAGNAPLATE HARDWARE
    contract · Last action 2012-10-18
    $8,209
  • Department of Defense
    FSC: 7777 NAME: SERVICE - SIGH PART NUMBER: IGF::CL::IGF
    contract · Last action 2015-09-01
    $8,064
  • Department of Defense
    IGF::OT::IGF SERVICE
    contract · Last action 2016-03-05
    $6,598
  • Department of Defense
    FSC: 7777 NAME: SERVICE-COATIN PART NUMBER:
    contract · Last action 2012-08-04
    $5,145
  • Department of Defense
    IGF::OT::IGF NEDOX COATING
    contract · Last action 2015-11-19
    $4,713
  • Department of Defense
    IGF::OT::IGF SERVICES, COATING
    contract · Last action 2015-12-03
    $4,173
  • Department of Defense
    BPA WEB TOOL. CALL.
    contract · Last action 2015-12-03
    $2,631
  • Department of Defense
    SERVICE, NEDOX
    contract · Last action 2012-03-01
    $833
  • Department of Defense
    SERVICE, HCR AL CAPS
    contract · Last action 2012-05-24
    $691
  • Department of Defense
    SERVICE, VENDOR
    contract · Last action 2011-04-29
    $677
  • Department of Defense
    ANODIZE TRAVERSE SCREW LOT OF 3 EACH
    contract · Last action 2019-03-21
    $321
  • Department of Defense
    SERVICE, VENDOR
    contract · Last action 2009-06-29
    $265
  • Department of Defense
    BPA WEB TOOL. CALL.
    contract · Last action 2016-09-27
    $0
  • Department of Defense
    PLATING
    contract · Last action 2015-05-07
    $0

Federal contract dollars to this establishment. Primary NAICS: 332913 - PLUMBING FIXTURE FITTING AND TRIM MANUFACTURING. Last action: 2019-03-21. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2016-11-22Referral1$1,890
1999-09-08Referral0$0
1997-08-26Accident0$0
1992-04-23Planned0$0
1992-03-30Planned2$0
1988-06-30Follow-up0$0
1988-03-17Planned1814$1,950
1977-05-27Planned1$0
1976-08-24Planned5$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within NJ, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GENERAL MAGNAPLATE CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GENERAL MAGNAPLATE CORPORATION's OSHA violation history?
GENERAL MAGNAPLATE CORPORATION has 9 OSHA inspections on record with 27 violations and $3,840 in total penalties.
How does GENERAL MAGNAPLATE CORPORATION's safety record compare to its industry?
GENERAL MAGNAPLATE CORPORATION operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. GENERAL MAGNAPLATE CORPORATION's self-reported DART rate is 0 compared to an industry average of 3.1.