Establishment profile
GENERAL-ELECTRO MECHANICAL CORP.
785 HERTEL AVE., BUFFALO, NY, 14207
Summary
GENERAL-ELECTRO MECHANICAL CORP. has accumulated 40 OSHA violations across 7 inspections over 46 years of recorded history, with $4,015 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 131,664 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 40 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GENERAL-ELECTRO MECHANICAL CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
57% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 27 citations in this view · $4,015 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 2 | $605 | Dec 1982 | Dec 1985 |
| 29 CFR 1910.0212 A03 II | 2 | 2 | $510 | Feb 1980 | Dec 1985 |
| 29 CFR 1910.0219 D01 | 2 | 2 | $510 | Feb 1980 | Jan 1981 |
| 29 CFR 1910.0213 H01 | 2 | 2 | $240 | Feb 1980 | Dec 1985 |
| 29 CFR 1910.0242 B | 2 | 2 | $180 | Jan 1981 | Dec 1982 |
| 29 CFR 1910.0304 F04 | 2 | 2 | $140 | Dec 1982 | Dec 1985 |
| 29 CFR 1910.0305 G01 I | 1 | 1 | $540 | Dec 1982 | Dec 1982 |
| 29 CFR 1910.0179 J03 | 1 | 1 | $300 | Feb 1980 | Feb 1980 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | $300 | Feb 1980 | Feb 1980 |
| 29 CFR 1910.0106 E06 I | 1 | 1 | $240 | Jan 1981 | Jan 1981 |
| 29 CFR 1910.0037 F06 | 1 | 1 | $240 | Feb 1980 | Feb 1980 |
| 29 CFR 1910.0094 C03 IA | 1 | 1 | $210 | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0022 A01 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0094 C02 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0107 E02 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0107 G03 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0107 G07 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0134 B01 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0134 B06 | 1 | 1 | — | Dec 1985 | Dec 1985 |
| 29 CFR 1910.0106 D01 I | 1 | 1 | — | Dec 1982 | Dec 1982 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 131,664 employers. This establishment has 40 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 40+ years. Most recent activity: 40 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GENERAL-ELECTRO MECHANICAL CORP.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1985-12-04 | Planned | 13 | 3 | $805 | |
| 1982-12-06 | Planned | 7 | 2 | $1,080 | |
| 1982-06-25 | Planned | 0 | — | $0 | |
| 1980-12-30 | Planned | 6 | 3 | $450 | |
| 1980-03-14 | Follow-up | 0 | — | $0 | |
| 1980-03-10 | Follow-up | 0 | — | $0 | |
| 1980-01-28 | Complaint | 14 | 11 | $1,680 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in NYState-wide enforcement data
About this data
This profile aggregates federal enforcement records on GENERAL-ELECTRO MECHANICAL CORP. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GENERAL-ELECTRO MECHANICAL CORP.'s OSHA violation history?
- GENERAL-ELECTRO MECHANICAL CORP. has 7 OSHA inspections on record with 40 violations and $4,015 in total penalties.