Skip to main content

Establishment profile

GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.

156 CEDAR AVENUE, SCRANTON, PA, 18505
Operated by General Dynamics · 1 of 368 establishments
332993Ammunition (except Small Arms) Manufacturing

Download as PDF →

OSHA inspections
3
over 12 years
Violations
2
$5,625 in penalties
Penalties
$5,625
$2,813 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC. has accumulated 2 OSHA violations across 3 inspections over 12 years of recorded history, with $5,625 in total assessed penalties.

The establishment sits in the 36th percentile for violations within its industry-state peer group of 523 employers. Inspection frequency runs at the 68th percentile. The most recent enforcement activity was recorded 1 year ago.

Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.3 / yr · last 12 yrs
Violations
2
0.2 / yr
Penalties
$5,625
$2,813 avg / violation
100% serious0% other
Inspection trigger · referral
2 of 3
Inspection trigger · planned
1 of 3

33% of inspections at this establishment produced violations,

Peer comparison

36th

Below average violations in NAICS 3329 within PA. Peer group: 523 employers. This establishment has 2 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
70th
peer median: $1,740
Inspection frequency
68th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.9
vs industry
−0.3
TRIR
1.4
vs industry
−0.8

Reported for 270 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.3
BLS SOII 2024
Industry avg DART
1.2
BLS SOII 2024
Self-reported TRIR
1.4
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Referral
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jul 2015 – Jul 2024 · 2 in last 5 years

Reports
3
Hospitalizations
2
Amputations
1
Eye losses
0

Most frequent event: Caught in running equipment or machinery, unspecified

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Jul 10, 2024Exposure to environmental heat indoorBODY SYSTEMSHospitalized
May 24, 2023Caught in running equipment or machinery, unspecifiedFingertip(s)Amputation
Jul 17, 2015Direct exposure to electricity, greater than 220 voltsHand(s) and arm(s), unspecifiedHospitalized

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
1 year ago

Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2024-07-15Referral0$0
2015-07-22Referral22$5,625
2014-01-07Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC. is one of 368 establishments rolled up under the parent organization General Dynamics.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of General Dynamics across all 368 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in ammunition (except small arms) manufacturing within PA, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by General Dynamics, ordered by federal enforcement volume:

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup General Dynamics, which operates 368 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.'s OSHA violation history?
GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC. has 3 OSHA inspections on record with 2 violations and $5,625 in total penalties.
How does GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.'s safety record compare to its industry?
GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC. operates in the ammunition (except small arms) manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.3. GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.'s self-reported DART rate is 0.87 compared to an industry average of 1.2.