Establishment profile
GATES MACHINE TOOL REPAIR, INC.
7102 BISSELL ST., MANVEL, TX, 77578
332710 — Machine Shops
Summary
GATES MACHINE TOOL REPAIR, INC. has accumulated 3 OSHA violations across 3 inspections over 33 years of recorded history, with $2,130 in total assessed penalties.
The establishment sits in the 44th percentile for violations within its industry-state peer group of 491 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GATES MACHINE TOOL REPAIR, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $2,130 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1904.0039 A02 | 1 | 1 | $1,200 | May 2016 | May 2016 |
| 29 CFR 1910.0254 D01 | 1 | 1 | $630 | Aug 1992 | Aug 1992 |
| 29 CFR 1910.1200 H | 1 | 1 | $300 | Aug 1992 | Aug 1992 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within TX. Peer group: 491 employers. This establishment has 3 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GATES MACHINE TOOL REPAIR, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Feb 2016
Most frequent event: Struck by object or equipment dropped by injured worker
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Feb 3, 2016 | Struck by object or equipment dropped by injured worker | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jul 8, 1992 | E GI III,ELECTRICAL,ELECTROCUTED,WELDER,WELDING,WELDING ELECTRODE,WATERFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GATES MACHINE TOOL REPAIR, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GATES MACHINE TOOL REPAIR, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GATES MACHINE TOOL REPAIR, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GATES MACHINE TOOL REPAIR, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GATES MACHINE TOOL REPAIR, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
GATES MACHINE TOOL REPAIR, INC. 7102 BISSELL RD · MANVEL, TX, 77578 | RCRA | No Violation Identified | 0 | 0 | — | Apr 2015 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GATES MACHINE TOOL REPAIR, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-02-10 | Referral | 0 | — | $0 | |
| 2016-02-10 | Complaint | 1 | — | $1,200 | |
| 1992-07-14 | Accident | 2 | 1 | $930 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within TX, ordered by federal enforcement volume:
- AUTOMATIC PRODUCTS CORP.GARLAND — 3 federal enforcement records
- CATERPILLAR, INC.SAN ANTONIO — 3 federal enforcement records
- S & S MACHINING & FABRICATION, INCGROESBECK — 2 federal enforcement records
- DOOLING MACHINE PRODUCTS, INC.FREEPORT — 2 federal enforcement records
- TEAM INDUSTRIAL SERVICES, INC.HOUSTON — 2 federal enforcement records
- P&N MACHINE CO., INC.HOUSTON — 2 federal enforcement records
- GREAT SOUTHWEST TOOL CO.EL PASO — 2 federal enforcement records
- QUALITY INDUSTRIAL FABRICATION INC.HOUSTON — 2 federal enforcement records
- ARROW MANUFACTURED PRODUCTSWICHITA FALLS — 2 federal enforcement records
- COMMERCE GRINDINGDALLAS — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in TXState-wide enforcement data
- Machine Shops in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GATES MACHINE TOOL REPAIR, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GATES MACHINE TOOL REPAIR, INC.'s OSHA violation history?
- GATES MACHINE TOOL REPAIR, INC. has 3 OSHA inspections on record with 3 violations and $2,130 in total penalties.
- How does GATES MACHINE TOOL REPAIR, INC.'s safety record compare to its industry?
- GATES MACHINE TOOL REPAIR, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.
- Has GATES MACHINE TOOL REPAIR, INC. had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving GATES MACHINE TOOL REPAIR, INC..