Skip to main content

Establishment profile

GALL MACHINE COMPANY, INC.

9620-50 JOLIET ROAD, COUNTRYSIDE, IL, 60525
332618Other Fabricated Wire Product Manufacturing

Download as PDF →

OSHA inspections
3
over 31 years
Violations
16
$5,190 in penalties
Penalties
$5,190
$324 avg
Accident investigations on record
3 hospitalizations · 2 National Emphasis Program inspections

Summary

GALL MACHINE COMPANY, INC. has accumulated 16 OSHA violations across 3 inspections over 31 years of recorded history, with $5,190 in total assessed penalties.

The establishment sits in the 85th percentile for violations within its industry-state peer group of 111 employers. Inspection frequency runs at the 65th percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GALL MACHINE COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.1 / yr · last 31 yrs
Violations
16
0.5 / yr
Penalties
$5,190
$324 avg / violation
81% serious19% other
Inspection trigger · planned
2 of 3
Inspection trigger · referral
1 of 3

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 16 citations in this view · $5,190 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0178 I0111$900Jan 1995Jan 1995
29 CFR 1910.0095 C0111$900Jan 1995Jan 1995
29 CFR 1910.0095 B0111$900Jan 1995Jan 1995
29 CFR 1910.1200 H11$630Jan 1995Jan 1995
29 CFR 1910.1200 E0111$630Jan 1995Jan 1995
29 CFR 1910.0212 A03 II11$360Jan 1995Jan 1995
29 CFR 1910.0147 C0111$270Jan 1995Jan 1995
29 CFR 1910.0217 B08 III11$200Feb 1998Feb 1998
29 CFR 1910.0217 B04 I11$200Feb 1998Feb 1998
29 CFR 1910.0219 B0111$200Feb 1998Feb 1998
29 CFR 1910.0217 B04 II11Feb 1998Feb 1998
29 CFR 1910.0132 F0111Jan 1995Jan 1995
29 CFR 1910.0133 A0111Jan 1995Jan 1995
29 CFR 1910.1000 A0211Jan 1995Jan 1995
29 CFR 1910.0132 D0211Jan 1995Jan 1995
29 CFR 1910.1000 E11Jan 1995Jan 1995

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

85th

Worse on violations than most other employers in NAICS 3326 within IL. Peer group: 111 employers. This establishment has 16 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
59th
peer median: $3,520
Inspection frequency
65th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for GALL MACHINE COMPANY, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.2
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GALL MACHINE COMPANY, INC.. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Nov 29, 1994INDUSTRIAL TRUCK,CARBON MONOXIDE33

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GALL MACHINE COMPANY, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GALL MACHINE COMPANY, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GALL MACHINE COMPANY, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GALL MACHINE COMPANY, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GALL MACHINE COMPANY, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GALL MACHINE COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2007-10-24Planned0$0
1998-01-30Planned44$600
1994-11-30Referral129$4,590

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in other fabricated wire product manufacturing within IL, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GALL MACHINE COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GALL MACHINE COMPANY, INC.'s OSHA violation history?
GALL MACHINE COMPANY, INC. has 3 OSHA inspections on record with 16 violations and $5,190 in total penalties.
How does GALL MACHINE COMPANY, INC.'s safety record compare to its industry?
GALL MACHINE COMPANY, INC. operates in the other fabricated wire product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.2.