Skip to main content
FastDOL

Establishment profile

GAGE BILT, INC

44766 CENTRE CT, CLINTON TOWNSHIP, MI, 48038
333991 — Power-Driven Handtool Manufacturing
EIN 381777501

Download as PDF →

OSHA inspections
2
over 10 years
Violations
4
$2,250 in penalties
Penalties
$2,250
$563 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

GAGE BILT, INC has accumulated 4 OSHA violations across 2 inspections over 10 years of recorded history, with $2,250 in total assessed penalties.

The establishment sits in the 40th percentile for violations within its industry-state peer group of 492 employers. Inspection frequency runs at the 51st percentile. The most recent enforcement activity was recorded 6 months ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GAGE BILT, INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.2 / yr · last 10 yrs
Violations
4
0.4 / yr
Penalties
$2,250
$563 avg / violation
75% serious25% other
Inspection trigger · planned
2 of 2

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $2,250 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
408.10121(1)11$1,500Jan 2026Jan 2026
408.10114(2)11$750Jan 2026Jan 2026
29 CFR 1910.0157 E0111—Jan 2026Jan 2026
408.1012511—Jan 2026Jan 2026

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

40th

Below average violations in NAICS 3339 within MI. Peer group: 492 employers. This establishment has 4 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
68th
peer median: $800
Inspection frequency
51st
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−0.9
TRIR
0.0
vs industry
−1.3

Reported for 38 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
1.3
BLS SOII 2024
Industry avg DART
0.9
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GAGE BILT, INC. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
6 months ago

Most recent federal enforcement activity recorded 6 months ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GAGE BILT, INC. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for GAGE BILT, INC. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GAGE BILT, INC. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GAGE BILT, INC. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GAGE BILT, INC. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GAGE BILT, INC. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$254K
Obligated (all-time)
$1.2M
Awards
330
Top agency
General Services Administration
$762K
Top agencies by obligation (this location)
General Services Administration$762K
Department of Defense$456K
Department of Homeland Security$4K
Largest awards (top 50 of 330)
  • Department of Defense
    51 MXS HUCK RIVETER KIT IN OSAN AIR BASE
    contract · Last action 2025-09-29
    $70,804
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2013-10-02
    $56,729
  • Department of Defense
    RIVETER KITS
    contract · Last action 2016-09-23
    $43,267
  • Department of Defense
    RIVETER KIT
    contract · Last action 2009-03-21
    $41,145
  • Department of Defense
    GBP713BBK-1 RIVETER KIT: SUPER GRIP JAW
    contract · Last action 2008-09-24
    $40,365
  • General Services Administration
    INTALLATION TOOL KIT: - SEE ATTACHED DOCUMENT FO R DETAIL. #GBP353A-51
    contract · Last action 2012-01-09
    $35,242
  • Department of Defense
    RIVET GUN AND NOSE ASSEMBLY KIT
    contract · Last action 2025-07-08
    $35,079
  • Department of Defense
    TOOL KIT INSTALLATION
    contract · Last action 2010-11-18
    $33,674
  • General Services Administration
    INTALLATION TOOL KIT, GAGE BILT PRODUCTS GBP353A-51 OR EQUAL (PARTIAL DESCRIPTION)
    contract · Last action 2023-06-20
    $29,582
  • Department of Defense
    8505011514!TOOL KIT,RIVETER
    contract · Last action 2017-12-08
    $26,770
  • Department of Defense
    GAGE BILT, LOCKBOLT AND BLIND RIVET INST
    contract · Last action 2012-06-18
    $21,934
  • Department of Defense
    RIVETER KIT PART # GBP713BBK-1 KIT (NOTE
    contract · Last action 2009-02-26
    $20,183
  • General Services Administration
    RIVETER, BLIND, PNEUMATIC: IAW MILSPC MIL-R-85188A, DATED 11/14/86 AND AMENDMENT-1, DATED 01/10/92. MIL-R-85188A TYPE: II RIVET CAPACITY: 3/16 INCH DIA. MAX. NOSE FITTING: 3/4-20 UNEF-2B INTERNAL THREAD OPERATING AIR PRESSURE: 90 PSI OPERATING AIR CO
    contract · Last action 2023-05-15
    $19,124
  • Department of Defense
    RIVETER KIT GB756LGPK-1
    contract · Last action 2025-05-15
    $16,445
  • General Services Administration
    INSTALLATION TOOL KIT GAGE BILT PRODUCTS GBP353A-51 OR EQUAL (PARTIAL DESCRIPTION)
    contract · Last action 2023-05-18
    $14,791
  • General Services Administration
    INSTALLATION TOOL KIT GAGE BILT PRODUCTS GBP353A-51 OR EQUAL (PARTIAL DESCRIPTION)
    contract · Last action 2023-05-15
    $14,791
  • General Services Administration
    INSTALLATION TOOL KIT
    contract · Last action 2022-09-12
    $14,791
  • General Services Administration
    INSTALLATION TOOL KIT
    contract · Last action 2022-09-12
    $14,791
  • Department of Defense
    TAPS DIES AND COLLETS HAND AND MACHINE
    contract · Last action 2022-10-01
    $14,394
  • General Services Administration
    RIVETER, PNEUDRAULIC MSP: 160
    contract · Last action 2011-11-22
    $11,968
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2013-05-23
    $11,186
  • Department of Defense
    RIVETER KIT
    contract · Last action 2011-09-28
    $10,967
  • General Services Administration
    SEE DESCRIPTION IN CONTRACT
    contract · Last action 2014-03-07
    $10,471
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2013-10-14
    $10,387
  • Department of Defense
    RIVETER KIT PART NO. GBP713BBK-1
    contract · Last action 2008-09-30
    $10,091
  • Department of Defense
    RIVETER KIT
    contract · Last action 2010-04-14
    $10,007
  • General Services Administration
    NO DESCRIPTION PROVIDED IN CATALOG
    contract · Last action 2017-10-19
    $9,934
  • Department of Defense
    LOCKBOLT INSTALLATION KIT
    contract · Last action 2008-08-01
    $9,611
  • General Services Administration
    PULLING HEAD
    contract · Last action 2018-10-29
    $9,373
  • Department of Defense
    P/N 18300
    contract · Last action 2015-08-24
    $9,136
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-11-06
    $8,115
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2012-02-08
    $7,990
  • General Services Administration
    INTALLATION TOOL KIT: - SEE ATTACHED DOCUMENT FO R DETAIL.
    contract · Last action 2015-04-06
    $7,770
  • General Services Administration
    INTALLATION TOOL KIT: -SEE ATTACHED DOCUMENT FOR DETAIL.
    contract · Last action 2015-06-05
    $7,770
  • General Services Administration
    TAS::47 4534 001::TAS SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-09-03
    $7,467
  • Department of Defense
    BLIND RIVET INSTALLATION TOOL KIT
    contract · Last action 2012-02-29
    $7,435
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2009-06-29
    $7,191
  • General Services Administration
    INTALLATION TOOL KIT: - SEE ATTACHED DOCUMENT FO R DETAIL. #GBP353A-51
    contract · Last action 2012-08-23
    $7,119
  • General Services Administration
    INTALLATION TOOL KIT: -SEE ATTACHED DOCUMENT FOR DETAIL. #GBP353A-51
    contract · Last action 2012-06-26
    $7,119
  • General Services Administration
    INTALLATION TOOL KIT: -SEE ATTACHED DOCUMENT FOR DETAIL. # GBP353A-51
    contract · Last action 2012-06-22
    $7,119
  • General Services Administration
    BLIND RIVETER (PNEUMATIC)
    contract · Last action 2018-07-03
    $7,088
  • General Services Administration
    INTALLATION TOOL KIT: - SEE ATTACHED DOCUMENT FO R DETAIL. P/N# GBP353A-51
    contract · Last action 2012-03-27
    $7,048
  • General Services Administration
    SEE DESCRIPTION IN CONTRACT
    contract · Last action 2014-03-07
    $6,981
  • General Services Administration
    SEE DESCRIPTION IN CONTRACT
    contract · Last action 2014-03-07
    $6,981
  • General Services Administration
    SEE DESCRIPTION IN CONTRACT
    contract · Last action 2014-03-07
    $6,981
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-29
    $6,898
  • Department of Defense
    RIVET KIT
    contract · Last action 2009-01-29
    $6,703
  • General Services Administration
    NOSE ASSEMBLY: TYPE: NOSE ASSEMBLY GENERAL CHARA CTERISTICS: OFFSET; SINGLE ACTION; NON-SELF RELE ASING FUNCTIONAL DESCRIPTION: FOR INSTALLING GP, NAS SHEAR, HUCKBOLT 06 FASTNER AND NAS TENSION LOCKBOLTS END ITEM IDENTIFICATION: GAGE BILT PRO DUCTS FASTENING TOOL PN. GBP204 GAGE BILT PRODUC TS CORP. PN NAS06-204C-25OS (PARTIAL DESCRIPTION )
    contract · Last action 2012-03-23
    $6,650
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2012-01-19
    $6,392
  • General Services Administration
    TOOL KIT, RIVETER. SEE COMPLETE DESCRIPTION IN SPQ.
    contract · Last action 2011-04-18
    $6,392

Federal contract dollars to this establishment. Primary NAICS: 333991 - POWER-DRIVEN HANDTOOL MANUFACTURING. Last action: 2026-04-20. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2025-12-11Planned43$2,250
2015-09-10Planned0—$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in power-driven handtool manufacturing within MI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GAGE BILT, INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GAGE BILT, INC's OSHA violation history?
GAGE BILT, INC has 2 OSHA inspections on record with 4 violations and $2,250 in total penalties.
How does GAGE BILT, INC's safety record compare to its industry?
GAGE BILT, INC operates in the power-driven handtool manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.3. GAGE BILT, INC's self-reported DART rate is 0 compared to an industry average of 0.9.