Skip to main content

Establishment profile

FUSION COATINGS, INC.

1101 E. SANBORN ST., WINONA, MN, 55987
332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Download as PDF →

OSHA inspections
10
over 40 years
Violations
69
$11,647 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
2 OSHA follow-ups

Summary

FUSION COATINGS, INC. has accumulated 69 OSHA violations across 10 inspections over 40 years of recorded history, with $11,647 in total assessed penalties.

The establishment sits in the 100th percentile for violations within its industry-state peer group of 219 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 20 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

FUSION COATINGS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
10
0.3 / yr · last 40 yrs
Violations
69
1.7 / yr
Penalties
$11,647
$169 avg / violation
38% serious62% other
Inspection trigger · complaint
4 of 10
Inspection trigger · planned
3 of 10

90% of inspections at this establishment produced violations, with 8 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 28 citations in this view · $9,966 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0242 B33$180Jul 1985Mar 1997
29 CFR 5205.06750222$450Mar 1997Mar 2003
29 CFR 5205.01160122$445Dec 1993Mar 2003
29 CFR 1910.0151 C22$373Aug 1988Mar 1997
29 CFR 1910.0134 E 5 I22$224Aug 1988Jan 1989
29 CFR 1910.0212 A0121$132Jul 1985Jul 1985
29 CFR 1820.6530822Mar 1997Mar 2003
29 CFR 1910.0095 C11$1,890Oct 1985Oct 1985
29 CFR 1910.1000 C11$1,215Oct 1985Oct 1985
29 CFR 1926.0651 O11$770Sep 1989Sep 1989
29 CFR 1926.0652 B11$770Sep 1989Sep 1989
29 CFR 5205.071011$630Oct 2005Oct 2005
29 CFR 1910.0022 B0111$420Oct 2005Oct 2005
29 CFR 1910.0132 A11$420Oct 2005Oct 2005
29 CFR 1926.0651 F11$392Sep 1989Sep 1989
29 CFR 1910.0254 C02 I11$360Mar 1997Mar 1997
29 CFR 1820.6530211$350Mar 2003Mar 2003
29 CFR 1910.0219 F 311$350Aug 1988Aug 1988
29 CFR 5207.02500511$315Aug 1988Aug 1988
29 CFR 1910.0217 C02 IA11$280Mar 2003Mar 2003

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

100th

Worse on violations than nearly every other employer in NAICS 3328 within MN. Peer group: 219 employers. This establishment has 69 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
94th
peer median: $1,467
Inspection frequency
89th
peer median: 3

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for FUSION COATINGS, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
3.1
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
4
Referral
1
Follow-up
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for FUSION COATINGS, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
20 years ago

No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for FUSION COATINGS, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for FUSION COATINGS, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for FUSION COATINGS, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for FUSION COATINGS, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for FUSION COATINGS, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for FUSION COATINGS, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2005-09-23Complaint44$1,470
2003-02-11Planned76$1,540
1996-12-09Planned86$1,320
1993-09-27Complaint2$165
1989-08-24Referral33$1,932
1988-12-08Follow-up2$224
1988-07-11Complaint235$1,519
1985-10-02Follow-up0$0
1985-06-25Planned172$372
1985-06-25Complaint3$3,105

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within MN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on FUSION COATINGS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is FUSION COATINGS, INC.'s OSHA violation history?
FUSION COATINGS, INC. has 10 OSHA inspections on record with 69 violations and $11,647 in total penalties.
How does FUSION COATINGS, INC.'s safety record compare to its industry?
FUSION COATINGS, INC. operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.