Establishment profile
FULLER TOOL CO INC
152 35 10 AVE, New York -Richmond, NY, 11357
Summary
FULLER TOOL CO INC has accumulated 30 OSHA violations across 12 inspections over 53 years of recorded history, with $670 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 131,664 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 43 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
FULLER TOOL CO INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 30 citations in this view · $670 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0023 C01 | 4 | 4 | $160 | Nov 1974 | Sep 1978 |
| 29 CFR 1910.0036 B04 | 3 | 3 | $80 | Jan 1973 | Sep 1978 |
| 29 CFR 1910.0157 A05 | 3 | 3 | — | Nov 1974 | Feb 1977 |
| 29 CFR 1910.0309 A 025045 | 3 | 2 | — | Jan 1973 | Nov 1974 |
| 29 CFR 1910.0037 Q05 | 2 | 2 | $80 | Jan 1973 | Nov 1974 |
| 29 CFR 1910.0215 A04 | 2 | 2 | — | Nov 1974 | Feb 1977 |
| 29 CFR 1910.0022 B02 | 2 | 2 | — | Jan 1973 | Feb 1977 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $240 | Feb 1977 | Feb 1977 |
| 29 CFR 1910.0309 A 025042 | 1 | 1 | $70 | Nov 1974 | Nov 1974 |
| 29 CFR 1910.0213 C01 | 1 | 1 | $40 | Nov 1974 | Nov 1974 |
| 29 CFR 1910.0036 D02 | 1 | 1 | — | Jun 1981 | Jun 1981 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Feb 1977 | Feb 1977 |
| 29 CFR 1910.0309 A 025051 | 1 | 1 | — | Jan 1976 | Jan 1976 |
| 29 CFR 1910.0023 E04 | 1 | 1 | — | Jan 1976 | Jan 1976 |
| 29 CFR 1910.0133 A01 | 1 | 1 | — | Jan 1976 | Jan 1976 |
| 29 CFR 1910.0178 G10 | 1 | 1 | — | Jan 1976 | Jan 1976 |
| 29 CFR 1910.0036 D01 | 1 | 1 | — | Nov 1974 | Nov 1974 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Jan 1973 | Jan 1973 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 131,664 employers. This establishment has 30 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for FULLER TOOL CO INC. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for FULLER TOOL CO INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 43+ years. Most recent activity: 43 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for FULLER TOOL CO INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for FULLER TOOL CO INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for FULLER TOOL CO INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for FULLER TOOL CO INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for FULLER TOOL CO INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1983-01-11 | Complaint | 0 | — | $0 | |
| 1982-12-02 | Planned | 0 | — | $0 | |
| 1981-06-09 | Planned | 1 | — | $0 | |
| 1978-11-02 | Follow-up | 0 | — | $0 | |
| 1978-09-26 | Planned | 2 | — | $160 | |
| 1977-05-02 | Follow-up | 0 | — | $0 | |
| 1977-01-18 | Planned | 6 | 1 | $240 | |
| 1976-01-23 | Planned | 6 | — | $0 | |
| 1974-12-31 | Follow-up | 0 | — | $0 | |
| 1974-11-22 | Planned | 10 | — | $270 | |
| 1973-02-23 | Follow-up | 0 | — | $0 | |
| 1973-01-12 | Planned | 5 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in NYState-wide enforcement data
About this data
This profile aggregates federal enforcement records on FULLER TOOL CO INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is FULLER TOOL CO INC's OSHA violation history?
- FULLER TOOL CO INC has 12 OSHA inspections on record with 30 violations and $670 in total penalties.