Establishment profile
FRANK MANCE PLATING, LLC
2823 PENN AVENUE, PITTSBURGH, PA, 15222
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
FRANK MANCE PLATING, LLC has accumulated 24 OSHA violations across 3 inspections over 13 years of recorded history, with $12,700 in total assessed penalties.
The establishment sits in the 89th percentile for violations within its industry-state peer group of 283 employers. Inspection frequency runs at the 64th percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
FRANK MANCE PLATING, LLC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $12,700 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1000 A02 | 1 | 1 | $2,200 | Jan 2025 | Jan 2025 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,400 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0151 C | 1 | 1 | $1,200 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,000 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $1,000 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0022 A01 | 1 | 1 | $900 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0134 C02 II | 1 | 1 | $900 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $900 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0303 F02 | 1 | 1 | $800 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0023 A08 II | 1 | 1 | $600 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0303 G01 | 1 | 1 | $600 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0036 B01 | 1 | 1 | $600 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0157 E02 | 1 | 1 | $600 | Apr 2013 | Apr 2013 |
| 29 CFR 1910.1000 E | 1 | 1 | — | Jan 2025 | Jan 2025 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | — | Jan 2025 | Jan 2025 |
| 29 CFR 1910.0134 K06 | 1 | 1 | — | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0134 E06 I | 1 | 1 | — | Apr 2013 | Apr 2013 |
| 29 CFR 1910.0022 A02 | 1 | 1 | — | Apr 2013 | Apr 2013 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Apr 2013 | Apr 2013 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | Apr 2013 | Apr 2013 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3328 within PA. Peer group: 283 employers. This establishment has 24 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for FRANK MANCE PLATING, LLC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for FRANK MANCE PLATING, LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for FRANK MANCE PLATING, LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for FRANK MANCE PLATING, LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for FRANK MANCE PLATING, LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for FRANK MANCE PLATING, LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for FRANK MANCE PLATING, LLC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
FRANK MANCE PLATING, LLC 2823 PENN AVENUE · PITTSBURGH, PA, 15222 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-10-10 | Planned | 3 | 2 | $2,200 | |
| 2013-01-11 | Referral | 10 | 9 | $3,900 | |
| 2013-01-04 | Referral | 11 | 10 | $6,600 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within PA, ordered by federal enforcement volume:
- ENVIROSAFE STRIPPING INC.CARNEGIE — 2 federal enforcement records
- PHILADELPHIA RUST-PROOF COMPANY, INC.PHILADELPHIA — 2 federal enforcement records
- SHARRETTS PLATING COMPANY, INC.EMIGSVILLE — 2 federal enforcement records
- MILLCREEK METAL FINISHINGERIE — 2 federal enforcement records
- LEADING TECHNOLOGIES, INC.LEECHBURG — 2 federal enforcement records
- AMERICAN TINNING & GALVANIZING COMPANYERIE — 2 federal enforcement records
- WADE TECHNOLOGY, INC.PHILADELPHIA — 2 federal enforcement records
- POTTSTOWN PLATING WORKS, INCPOTTSTOWN — 2 federal enforcement records
- KLEIN PLATING WORKS, INC.ERIE — 2 federal enforcement records
- AMZ MANUFACTURING CORPORATIONYORK — 2 federal enforcement records
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in PAState-wide enforcement data
- Electroplating, Plating, Polishing, in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on FRANK MANCE PLATING, LLC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is FRANK MANCE PLATING, LLC's OSHA violation history?
- FRANK MANCE PLATING, LLC has 3 OSHA inspections on record with 24 violations and $12,700 in total penalties.
- How does FRANK MANCE PLATING, LLC's safety record compare to its industry?
- FRANK MANCE PLATING, LLC operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.