Establishment profile
F&M TOOL AND PLASTICS, INC
175 PIONEER DRIVE, LEOMINSTER, MA, 01453
Operated by FM Tool & Plastics
326199 — All Other Plastics Product Manufacturing
EIN 043255422
Summary
F&M TOOL AND PLASTICS, INC has accumulated 26 OSHA violations across 6 inspections over 16 years of recorded history, with $78,204 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 294 employers. Inspection frequency runs at the 90th percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
F&M TOOL AND PLASTICS, INC appears in OSHA workplace safety, WHD wage enforcement, and FMCSA motor carrier registration records only. No matching records were found in MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
83% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 3261 within MA. Peer group: 294 employers. This establishment has 26 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 270 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for F&M TOOL AND PLASTICS, INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.
Wage and hour breakdown by law
Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 113 violations · $10,000 in backwages
| Statute | Period | Cases | Violations | Workers | Backwages | Civil penalty |
|---|---|---|---|---|---|---|
| FLSA — minimum wage & overtime | Dec 2017 | 1 | 113 | 111 | $10,000 | — |
Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.
Wage and hour cases
Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; final payment may differ. 1 case · $10,000 in backwages · 111 workers affected
| Case period | Industry | Backwages | Workers |
|---|---|---|---|
| Jan 2016 – Dec 2017 | Plastics Material and Resin Manufacturing | $10,000 | 111 |
Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public.
Mine safety (MSHA)
No MSHA mine safety violations on file for F&M TOOL AND PLASTICS, INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for F&M TOOL AND PLASTICS, INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for F&M TOOL AND PLASTICS, INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for F&M TOOL AND PLASTICS, INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for F&M TOOL AND PLASTICS, INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2021-05-12 | Complaint | 4 | 4 | $18,237 | |
| 2018-12-27 | Complaint | 0 | — | $0 | |
| 2017-08-21 | Referral | 3 | 2 | $15,483 | |
| 2017-03-06 | Complaint | 16 | 7 | $37,484 | |
| 2012-03-29 | Complaint | 2 | 2 | $4,500 | |
| 2009-08-18 | Complaint | 1 | 1 | $2,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
F&M TOOL AND PLASTICS, INC is one of 1 establishments rolled up under the parent organization FM Tool & Plastics.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of FM Tool & Plastics across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in all other plastics product manufacturing within MA, ordered by federal enforcement volume:
- AARON INDUSTRIES, INC.LEOMINSTER — 3 federal enforcement records
- PEXCO, LLCATHOL — 3 federal enforcement records
- POLYMER CORPORATIONPALMER — 2 federal enforcement records
- SCHOLAR CRAFTSPRINGFIELD — 2 federal enforcement records
- GROVE PRODUCTS, INC.LEOMINSTER — 2 federal enforcement records
- CARDINAL COMB & BRUSH MFG.LEOMINSTER — 2 federal enforcement records
- HARDIGG INDUSTRIES, INC.SOUTH DEERFIELD — 2 federal enforcement records
- LEAKTITE CORPORATIONLEOMINSTER — 2 federal enforcement records
- G & F INDUSTRIES, INCORPORATEDSTURBRIDGE — 2 federal enforcement records
- CUMING CORPORATIONAVON — 2 federal enforcement records
Related searches
- All FM Tool & Plastics locationsParent rollup
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in MAState-wide enforcement data
- All Other Plastics in MAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on F&M TOOL AND PLASTICS, INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup FM Tool & Plastics.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is F&M TOOL AND PLASTICS, INC's OSHA violation history?
- F&M TOOL AND PLASTICS, INC has 6 OSHA inspections on record with 26 violations and $78,203.5 in total penalties.
- How does F&M TOOL AND PLASTICS, INC's safety record compare to its industry?
- F&M TOOL AND PLASTICS, INC operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. F&M TOOL AND PLASTICS, INC's self-reported DART rate is 1.41 compared to an industry average of 1.8.