Establishment profile
EXCEL MACHINE & FABRICATION, INC.
1230 RIDGELY STREET, BALTIMORE, MD, 21230
332312 — Fabricated Structural Metal Manufacturing
Summary
EXCEL MACHINE & FABRICATION, INC. has accumulated 42 OSHA violations across 5 inspections over 28 years of recorded history, with $16,667 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 183 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 1 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
EXCEL MACHINE & FABRICATION, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 30 citations in this view · $16,667 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 5040.6 A01 | 3 | 3 | — | Oct 2001 | Dec 2013 |
| 29 CFR 1910.1200 E01 | 2 | 2 | $2,725 | Sep 1997 | Dec 2013 |
| 29 CFR 1910.0219 D01 | 2 | 2 | $2,200 | Sep 1997 | Sep 2008 |
| 29 CFR 1910.0178 L01 I | 2 | 2 | $1,925 | Oct 2001 | Dec 2013 |
| 29 CFR 1910.0305 G02 III | 2 | 2 | $800 | Sep 1997 | Oct 2001 |
| 29 CFR 1910.0178 L06 | 2 | 2 | — | Oct 2001 | Dec 2013 |
| 29 CFR 1910.0242 B | 2 | 2 | — | Oct 2001 | Sep 2008 |
| 29 CFR 1910.0132 F04 | 2 | 2 | — | Oct 2001 | Sep 2008 |
| 29 CFR 1910.0132 D02 | 2 | 2 | — | Oct 2001 | Sep 2008 |
| 29 CFR 5010.4 A | 1 | 1 | $2,250 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,925 | Dec 2013 | Dec 2013 |
| 29 CFR 1910.0157 D06 | 1 | 1 | $1,280 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0157 C04 | 1 | 1 | $1,100 | Dec 2013 | Dec 2013 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $1,100 | Sep 1997 | Sep 1997 |
| 29 CFR 1910.0305 J01 I | 1 | 1 | $962 | Dec 2013 | Dec 2013 |
| 29 CFR 1910.0132 A | 1 | 1 | $400 | Oct 2001 | Oct 2001 |
| 29 CFR 5040.5 B03 | 1 | 1 | — | Dec 2013 | Dec 2013 |
| 29 CFR 1910.0157 E02 | 1 | 1 | — | Dec 2013 | Dec 2013 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | — | Dec 2013 | Dec 2013 |
| 29 CFR 1910.0303 G02 II | 1 | 1 | — | Dec 2013 | Dec 2013 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within MD. Peer group: 183 employers. This establishment has 42 OSHA violations; peer median is 14.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for EXCEL MACHINE & FABRICATION, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for EXCEL MACHINE & FABRICATION, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for EXCEL MACHINE & FABRICATION, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for EXCEL MACHINE & FABRICATION, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for EXCEL MACHINE & FABRICATION, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for EXCEL MACHINE & FABRICATION, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for EXCEL MACHINE & FABRICATION, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
EXCEL MACHINE & FABRICATION, INC. 1230 RIDGELY STREET · BALTIMORE, MD, 21230 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for EXCEL MACHINE & FABRICATION, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- National Aeronautics and Space AdministrationCOMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.contract · Last action 2013-07-12$54,489
- Department of DefenseBAWS TUBES 6061-T6 ALUMINUMcontract · Last action 2012-07-10$37,616
- National Aeronautics and Space AdministrationCOMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.contract · Last action 2011-01-28$26,207
- National Aeronautics and Space AdministrationFABRICATION BPA CALLcontract · Last action 2009-06-23$25,350
- Department of DefensePART #8006-2311 POWER SUPPLY CHASSIScontract · Last action 2013-11-22$23,644
- National Aeronautics and Space AdministrationFABRICATION SERVICEScontract · Last action 2009-05-11$17,200
- Department of Defense8006-2311-1contract · Last action 2010-07-28$11,963
- Department of DefensePOWER SUPPLY CHASSIScontract · Last action 2008-05-05$10,364
- Department of DefensePOWER SUPPLY CHASSIScontract · Last action 2008-12-02$10,364
- Department of DefensePOWER SUPPLY CHASSIScontract · Last action 2009-09-14$8,452
- Consumer Product Safety CommissionBRAKE CHARGE BOX.contract · Last action 2010-11-05$7,050
- Department of Homeland SecurityBUSHING, SLEEVE, TO BE USED ON 41 UTB COAST GUARD BOATS.contract · Last action 2009-07-08$5,200
- Department of Defense8504128178!PLATE,RETAINING,SHAcontract · Last action 2017-02-17$2,593
- Department of Defense8509470014!CABLE ASSEMBLY,SPECcontract · Last action 2022-11-17$2,406
- Department of Defense8503745505!INTERCONNECT LINKcontract · Last action 2016-10-14$1,561
- National Aeronautics and Space AdministrationIGF::CL::IGF FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER II. THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2014-08-26$0
- Department of Defense8509853459!PANEL,FUSEcontract · Last action 2024-01-25$0
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2014-08-14$0
- National Aeronautics and Space AdministrationCOMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.contract · Last action 2009-08-18$0
- National Aeronautics and Space AdministrationFABRICATION BPAcontract · Last action 2009-01-13$0
Federal contract dollars to this establishment. Primary NAICS: 332114 - CUSTOM ROLL FORMING. Last action: 2024-01-25. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2026-05-20 | Planned | 0 | — | $0 | |
| 2013-10-07 | Planned | 17 | 9 | $7,837 | |
| 2008-05-07 | Planned | 8 | 2 | $5,030 | |
| 2001-09-25 | Planned | 10 | 3 | $400 | |
| 1997-07-07 | Planned | 7 | 7 | $3,400 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fabricated structural metal manufacturing within MD, ordered by federal enforcement volume:
- IRON FABRICATION SERVICES, INC.JESSUP — 3 federal enforcement records
- CANAM STEEL CORPORATIONPOINT OF ROCKS — 2 federal enforcement records
- CLARK WELDING AND FABRICATING, INC.FREDERICK — 2 federal enforcement records
- GEORGE'S WELDING SERVICE, INC.BALTIMORE — 2 federal enforcement records
- PHOENIX METALS INCBALTIMORE — 1 federal enforcement record
- WAMO CONTRACTORS, INC.CHEVERLY — 1 federal enforcement record
- JARVIS STEEL AND LUMBER COMPANY, INC.BALTIMORE — 1 federal enforcement record
- CAPITAL WELDING INCWALDORF — 1 federal enforcement record
- VICTORY STEEL CO, INC.BALTIMORE — 1 federal enforcement record
- HAGERSTOWN METAL FABRICATION INC.HAGERSTOWN — 1 federal enforcement record
Related searches
- Fabricated Structural Metal ManufacturingAll employers in this industry
- Employers in MDState-wide enforcement data
- Fabricated Structural Metal in MDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on EXCEL MACHINE & FABRICATION, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is EXCEL MACHINE & FABRICATION, INC.'s OSHA violation history?
- EXCEL MACHINE & FABRICATION, INC. has 5 OSHA inspections on record with 42 violations and $16,667 in total penalties.
- How does EXCEL MACHINE & FABRICATION, INC.'s safety record compare to its industry?
- EXCEL MACHINE & FABRICATION, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.