Establishment profile
ERICKSEN MACHINE AND TOOL CO., INC.
30 COMMERCE COURT, HARAHAN, LA, 70123
332710 — Machine Shops
Summary
ERICKSEN MACHINE AND TOOL CO., INC. has accumulated 17 OSHA violations across 5 inspections over 41 years of recorded history, with $903 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 245 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ERICKSEN MACHINE AND TOOL CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
40% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 17 citations in this view · $903 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $180 | Jul 1987 | May 2007 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $180 | Jul 1987 | Jul 1987 |
| 29 CFR 1904.0029 A | 1 | 1 | $153 | May 2007 | May 2007 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $135 | May 2007 | May 2007 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | $135 | May 2007 | May 2007 |
| 29 CFR 1910.0243 C01 | 1 | 1 | $120 | Jul 1987 | Jul 1987 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | May 2007 | May 2007 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1904.0002 A | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1904.0005 C | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1910.0157 E03 | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Jul 1987 | Jul 1987 |
| 29 CFR 1910.1200 F04 II | 1 | 1 | — | Jul 1987 | Jul 1987 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within LA. Peer group: 245 employers. This establishment has 17 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ERICKSEN MACHINE & TOOL CO INC 30 COMMERCE CT · HARAHAN, LA, 70123 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ERICKSEN MACHINE AND TOOL CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-10-17 | Planned | 0 | — | $0 | |
| 2012-07-12 | Planned | 0 | — | $0 | |
| 2007-04-24 | Planned | 5 | 3 | $603 | |
| 1987-06-02 | Planned | 12 | 3 | $300 | |
| 1984-07-11 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within LA, ordered by federal enforcement volume:
- BELL MACHINE COMPANYSHREVEPORT — 2 federal enforcement records
- HOWELL INDUSTRIES, INC.SULPHUR — 2 federal enforcement records
- NATIONAL OILWELL VARCO INCAMELIA — 2 federal enforcement records
- BELL MACHINE COMPANYSHREVEPORT — 2 federal enforcement records
- FALK RENEW PRAGERNEW ORLEANS — 2 federal enforcement records
- ALLIANCE LASER, INC.SLIDELL — 2 federal enforcement records
- MACHINE TECH, INC.HOUMA — 2 federal enforcement records
- SOUTHERN VALVE SERVICE, INC.PRAIRIEVILLE — 2 federal enforcement records
- M. RODRIGUE & SON, INC.VACHERIE — 2 federal enforcement records
- FALK RENEW PRAGERSAINT ROSE — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in LAState-wide enforcement data
- Machine Shops in LAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ERICKSEN MACHINE AND TOOL CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ERICKSEN MACHINE AND TOOL CO., INC.'s OSHA violation history?
- ERICKSEN MACHINE AND TOOL CO., INC. has 5 OSHA inspections on record with 17 violations and $903 in total penalties.
- How does ERICKSEN MACHINE AND TOOL CO., INC.'s safety record compare to its industry?
- ERICKSEN MACHINE AND TOOL CO., INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.