Establishment profile
ELF MACHINE WORKS INC.*
1600 N. STATE ROUTE M, INDEPENDENCE, MO, 64058
332710 — Machine Shops
Summary
ELF MACHINE WORKS INC.* has accumulated 6 OSHA violations across 4 inspections over 25 years of recorded history, with $2,980 in total assessed penalties.
The establishment sits in the 69th percentile for violations within its industry-state peer group of 259 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ELF MACHINE WORKS INC.* appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Above average violations in NAICS 3327 within MO. Peer group: 259 employers. This establishment has 6 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ELF MACHINE WORKS INC.*. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ELF MACHINE WORKS INC.*. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ELF MACHINE WORKS INC.*. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ELF MACHINE WORKS INC.*. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ELF MACHINE WORKS INC.*. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for ELF MACHINE WORKS INC.*. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ELF MACHINE WORKS INC.*. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ELF MACHINE WORKS INC.*. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-01-08$19,217
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2014-11-05$14,850
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-02-08$14,036
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-06-05$12,698
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-12-09$11,304
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2014-04-11$11,040
- Department of Defense4506512557!LEVER ASScontract · Last action 2008-01-13$10,117
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-10-07$9,420
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-10-07$9,420
- General Services AdministrationWRENCHES, SPANNER; MSP; 807contract · Last action 2013-08-12$9,420
- Department of Defense4515717178!SLEEVE,IDLER WHEELcontract · Last action 2010-09-29$7,730
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-02-26$7,348
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-01-08$7,027
- Department of Defense4522902465!PIPE,METALLICcontract · Last action 2012-11-09$6,986
- Department of Defense4506558409!COVER,ACCcontract · Last action 2008-01-17$6,921
- General Services AdministrationWRENCHES, SPANNER; MSP; 807contract · Last action 2013-09-16$6,594
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2012-11-29$6,406
- Department of Defense4523777594!RETAINER,PACKINGcontract · Last action 2013-02-28$6,250
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-01-02$5,991
- General Services AdministrationWRENCHES, SPANNER; MSP; 807contract · Last action 2014-03-24$5,652
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-09-04$5,633
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2012-11-14$5,087
- Department of DefenseMISCELLANEOUS VEHICULAR COMPONENTScontract · Last action 2009-01-26$5,016
- General Services AdministrationWRENCHES, SPANNER; MSP; 807 15. FORWARDER ADDRESS (USE SAME MARKINGS SHOWN ABOVE) NAVSUP FLC/DDPW PUGET SOUND REC OFF 467 W STREET BLDG 467 BREMERTON WA 98314-5130contract · Last action 2014-09-30$4,710
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-05-30$4,710
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2014-05-02$4,540
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-08-05$4,296
- General Services AdministrationWRENCHES, SPANNER; ********* 15. FORWARDER ADDRESS (USE SAME MARKINGS SHOWN ABOVE) GOVERNMENT OF ISRAEL MINISTRY OF DEFENSE CO G AND B PACKING COMPANY 8 HOOK ROAD BAYONNE NJ 07002-5082 *********contract · Last action 2013-01-16$3,768
- Department of Defense4518765426!BOAcontract · Last action 2011-12-19$3,709
- Department of Defense8500112524!ROLLER,LINEAR-ROTARcontract · Last action 2012-12-21$3,570
- Department of Defense4517076863!RETAINER BEARINGcontract · Last action 2011-02-28$3,540
- General Services AdministrationTAS::17 1804::TAS WRENCH ASSEMBLY: - SEE ATTACHED DOCUMENT FOR DETAIL.contract · Last action 2010-04-08$3,500
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-08-27$3,391
- Department of Defense4520875765!BOAcontract · Last action 2012-04-03$3,343
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2013-06-05$3,184
- General Services AdministrationWRENCHES, SPANNER;contract · Last action 2014-01-27$3,109
- General Services AdministrationPULLER, MECHANICAL: REACH LENGTH: 2-9/32 INCHESSPREAD RANGE: 5/8 INCHES MINIMUM AND 2-3/4 INCHES MAX FEATURES: ADAPTERCOVER PLATE AND BUSHINGPULLER USED TO: REMOVE GOVERNOR WEIGHT FROM COVER OF PT PUMPS ELF MACHINE WORKS PN ELF1504; AM GENERAL CORP. PN MA326-21116 OR EQUAL (PARTIAL DESCRIPTION)contract · Last action 2015-06-02$3,000
- General Services AdministrationTAS::17 1106::TAS INSERTER, BEARING AND BUSHING: IAW U.S. ARMY TACOM DRAWING NUMBER 12355510, DATED 23 OCTOBER 1985. OUTSIDE DIAMETER - 10.190 INCHES; THICKNESS - 1/2 (.500) INCH MATERIAL - CARBON STEEL; USE ASTM A36/A36M FOR STRUCTURAL SPECIFICATION. PN 12355510-1. EXCEPTION TO DRAWING: NOTES: 1. PER DEFENSE LOGISTICS AGENCY' SASSIST QUICKSEARCH DATABASE QQ-S-741 HAS BEEN SUPERSEDED BY ASTM-A36/A36M (CURRENT EDITION). 2.PER DEFENSE LOGISTICS AGENCY' S ASSIST QUICKSEARCH DATABASE DOD-P-16232 HAS BEEN SUPERSEDED BY MIL-DTL-16232 (CURRENT EDITION). (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >contract · Last action 2010-07-09$2,865
- General Services AdministrationINSERTER, BEARING AND BUSHING: IAW U.S. ARMY TACOM DRAWING NUMBER 12355510, DATED 23 OCTOBER 1985. OUTSIDE DIAMETER - 10.190 INCHES; THICKNESS - 1/2 (.500) INCH MATERIAL - CARBON STEEL; USE ASTM A36/A36M FOR STRUCTURAL SPECIFICATION. PN 12355510-1. EXCEPTION TO DRAWING: NOTES: 1. PER DEFENSE LOGISTICS AGENCY' SASSIST QUICKSEARCH DATABASE QQ-S-741 HAS BEEN SUPERSEDED BY ASTM-A36/A36M (CURRENT EDITION). 2.PER DEFENSE LOGISTICS AGENCY' S ASSIST QUICKSEARCH DATABASE DOD-P-16232 HAS BEEN SUPERSEDED BY MIL-DTL-16232 (CURRENT EDITION). (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION) < < PLEASE EXPEDITE THIS ORDER ASAP !! > >contract · Last action 2009-10-21$2,822
- Department of Defense8501553192!LEVER,MANUAL CONTROcontract · Last action 2014-11-12$2,667
- Department of Defense4506447896!HOOK,WEAPcontract · Last action 2008-01-03$2,642
- Department of Defense4508626121!HANDLE,MAcontract · Last action 2008-09-14$2,525
- General Services AdministrationTAS::17 1804::TAS WRENCH ASSEMBLY: ITEM NAME: WRENCH ASSEMBLY FAIR BANKS MORSE ENGINE DIVISION PN 16102528 OR ELF M ACHINE WORKS INC PN 7855. (PARTIAL DESCRIPTION) EXPEDITEcontract · Last action 2010-04-19$2,500
- General Services AdministrationREPLACER, SPINDLE: IAW US ARMY ORDNANCE DRAWING8351266, REV. A2 DATED 6-23-66 AND TECHNICAL DATA PACcontract · Last action 2008-07-21$2,475
- Department of Defense8502675479!WASHER,KEYcontract · Last action 2015-11-10$2,416
- Department of Defense8502511911!DETENTcontract · Last action 2015-09-16$2,145
- Department of Defense8503140445!PLATE,MOUNTINGcontract · Last action 2016-04-14$2,125
- Department of Defense8501698763!SPACER,RINGcontract · Last action 2015-01-09$1,986
- Department of Defense8501629832!POINTER,DIALcontract · Last action 2014-12-10$1,917
- Department of Defense8501658390!CLAMP HANDLE ASSEMBcontract · Last action 2014-12-19$1,868
Federal contract dollars to this establishment. Primary NAICS: 332216 - SAW BLADE AND HANDTOOL MANUFACTURING. Last action: 2018-12-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-05-07 | Planned | 3 | 3 | $2,380 | |
| 2011-01-19 | Planned | 0 | — | $0 | |
| 2006-12-14 | Planned | 3 | 2 | $600 | |
| 2000-09-15 | Complaint | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MO, ordered by federal enforcement volume:
- LMI AEROSPACE INC.WASHINGTON — 2 federal enforcement records
- O & F MACHINE PRODUCTS COMPANYJOPLIN — 2 federal enforcement records
- TUELL TOOL COMPANY INC.FERGUSON — 2 federal enforcement records
- PAVYER PRINTING MACHINE WORKSST. LOUIS — 2 federal enforcement records
- SOUTH SIDE MACHINE WORKS INC.SAINT LOUIS — 2 federal enforcement records
- KUHAR METALLIZING COMPANY, INC.KANSAS CITY — 2 federal enforcement records
- ENVISION TECH, INC.SAINT JOSEPH — 2 federal enforcement records
- HEITZ MACHINE & MANUFACTURINGMARYLAND HEIGHTS — 2 federal enforcement records
- R.M. INDUSTRIES, INC.PURDY — 1 federal enforcement record
- M G MACHINE INCBELTON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MOState-wide enforcement data
- Machine Shops in MOIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on ELF MACHINE WORKS INC.* from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is ELF MACHINE WORKS INC.*'s OSHA violation history?
- ELF MACHINE WORKS INC.* has 4 OSHA inspections on record with 6 violations and $2,980 in total penalties.
- How does ELF MACHINE WORKS INC.*'s safety record compare to its industry?
- ELF MACHINE WORKS INC.* operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.