Establishment profile
ELECTRO-DESIGN MANUFACTURING, INC.
4603 HWY 31 SOUTH, DECATUR, AL, 35602
Summary
ELECTRO-DESIGN MANUFACTURING, INC. has accumulated 20 OSHA violations across 5 inspections over 35 years of recorded history, with $4,985 in total assessed penalties.
The establishment sits in the 96th percentile for violations within its industry-state peer group of 27,040 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 28 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ELECTRO-DESIGN MANUFACTURING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 20 citations in this view · $4,985 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 1 | $900 | Dec 1992 | Dec 1992 |
| 29 CFR 1910.1025 L01 I | 1 | 1 | $1,150 | Jan 1993 | Jan 1993 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $900 | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $685 | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0106 H03 IIIB | 1 | 1 | $675 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0107 B05 I | 1 | 1 | $675 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0107 C06 | 1 | 1 | — | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0107 C07 | 1 | 1 | — | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | — | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0107 B05 IV | 1 | 1 | — | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0106 E02 IVD | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0333 B02 I | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.0334 A02 I | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.1030 C01 I | 1 | 1 | — | Dec 1992 | Dec 1992 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | — | Feb 1991 | Feb 1991 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 27,040 employers. This establishment has 20 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Dec 2, 1992 | RAILROAD CAR,INDUSTRIAL TRUCK,STRUCK BY,FALLING OBJECTFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 28+ years. Most recent activity: 28 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ELECTRO-DESIGN MANUFACTURING, INC.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1998-05-06 | Complaint | 0 | — | $0 | |
| 1997-05-22 | Complaint | 6 | 5 | $1,350 | |
| 1993-01-05 | Complaint | 1 | 1 | $1,150 | |
| 1992-12-02 | Planned | 12 | 5 | $2,485 | |
| 1991-01-17 | Planned | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in ALState-wide enforcement data
About this data
This profile aggregates federal enforcement records on ELECTRO-DESIGN MANUFACTURING, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ELECTRO-DESIGN MANUFACTURING, INC.'s OSHA violation history?
- ELECTRO-DESIGN MANUFACTURING, INC. has 5 OSHA inspections on record with 20 violations and $4,985 in total penalties.
- Has ELECTRO-DESIGN MANUFACTURING, INC. had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving ELECTRO-DESIGN MANUFACTURING, INC..