Establishment profile
E & M MACHINE & TOOL CO., INC.
2710 JOHN WILLIAMS BLVD., BEDFORD, IN, 47421
Summary
E & M MACHINE & TOOL CO., INC. has accumulated 24 OSHA violations across 3 inspections over 43 years of recorded history, with $2,760 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 59,557 employers. Inspection frequency runs at the 90th percentile. The most recent enforcement activity was recorded 27 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
E & M MACHINE & TOOL CO., INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $2,760 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $495 | Aug 1982 | Jan 1999 |
| 29 CFR 1910.0022 D01 | 2 | 2 | — | Aug 1982 | Jan 1999 |
| 29 CFR 1910.0038 A01 | 2 | 2 | — | Aug 1982 | Jan 1999 |
| 29 CFR 1910.1200 E04 | 1 | 1 | $450 | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $450 | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $300 | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $300 | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0304 A02 | 1 | 1 | $225 | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $160 | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0304 F05 V | 1 | 1 | $160 | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $120 | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $100 | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0106 D04 I | 1 | 1 | — | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0108 C05 | 1 | 1 | — | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0165 B01 | 1 | 1 | — | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0036 B07 | 1 | 1 | — | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Aug 1982 | Aug 1982 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 59,557 employers. This establishment has 24 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for E & M MACHINE & TOOL CO., INC.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for E & M MACHINE & TOOL CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 27+ years. Most recent activity: 27 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for E & M MACHINE & TOOL CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for E & M MACHINE & TOOL CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for E & M MACHINE & TOOL CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for E & M MACHINE & TOOL CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for E & M MACHINE & TOOL CO., INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for E & M MACHINE & TOOL CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1998-12-09 | Planned | 11 | 5 | $2,200 | |
| 1985-03-18 | Planned | 0 | — | $0 | |
| 1982-08-04 | Planned | 13 | 6 | $560 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in INState-wide enforcement data
About this data
This profile aggregates federal enforcement records on E & M MACHINE & TOOL CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is E & M MACHINE & TOOL CO., INC.'s OSHA violation history?
- E & M MACHINE & TOOL CO., INC. has 3 OSHA inspections on record with 24 violations and $2,760 in total penalties.