Establishment profile
E. GORNELL & SONS, LLC
2241 NORTH KNOX AVENUE, CHICAGO, IL, 60639
339994 — Broom, Brush, and Mop Manufacturing
EIN 833227746
OSHA inspections
5
over 40 years
Violations
9
$13,300 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
1 National Emphasis Program inspections · 3 OSHA follow-ups
Summary
E. GORNELL & SONS, LLC has accumulated 9 OSHA violations across 5 inspections over 40 years of recorded history, with $13,300 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 227 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
E. GORNELL & SONS, LLC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
Inspections
5
0.1 / yr · last 40 yrs
Violations
9
0.2 / yr
Penalties
$13,300
$1,478 avg / violation
67% serious33% other
Inspection trigger · complaint
2 of 5
Inspection trigger · planned
2 of 5
60% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 9 distinct standards shown · 9 citations in this view · $13,300 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C01 | 1 | 1 | $6,500 | Sep 2023 | Sep 2023 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $2,800 | Sep 2023 | Sep 2023 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,000 | Jul 1989 | Jul 1989 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $1,300 | Jul 1989 | Jul 1989 |
| 29 CFR 1910.0213 B03 | 1 | 1 | $400 | Jul 1989 | Jul 1989 |
| 29 CFR 1910.0157 G01 | 1 | 1 | $300 | Jul 1989 | Jul 1989 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | — | Sep 2023 | Sep 2023 |
| 29 CFR 1910.0157 G02 | 1 | 1 | — | Jul 1989 | Jul 1989 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Jul 1989 | Jul 1989 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
79th
Above average violations in NAICS 3399 within IL. Peer group: 227 employers. This establishment has 9 OSHA violations; peer median is 2.
Fewer violationsMore violations
Penalty percentile
86th
peer median: $2,400
Inspection frequency
94th
peer median: 1
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
DART rate
0.0
vs industry
−2.0
TRIR
8.2
vs industry
+5.4
Reported for 25 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
Industry avg TRIR
2.8
BLS SOII 2024
Industry avg DART
2.0
BLS SOII 2024
Self-reported TRIR
8.2
OSHA ITA Form 300A (employer self-reported)
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Planned
2
Complaint
2
Follow-up
1
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for E. GORNELL & SONS, LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
3 years ago
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for E. GORNELL & SONS, LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for E. GORNELL & SONS, LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for E. GORNELL & SONS, LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for E. GORNELL & SONS, LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for E. GORNELL & SONS, LLC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for E. GORNELL & SONS, LLC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Obligated (5-yr)
$0
Obligated (all-time)
$784K
Awards
91
Top agency
General Services Administration
$784K
Largest awards (top 50 of 91)
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-12-05$23,120
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-02-22$22,780
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-06-14$22,610
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-09-19$22,100
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-11-09$21,120
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-08-19$21,120
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-04-15$20,400
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-13$20,349
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-04-26$19,600
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-06-14$19,470
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-03-18$19,470
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-01-26$19,140
- General Services AdministrationBRUSH, WIRE, STAINLESS STEEL FILLER, TOOTHBRUSH STYLE. CURVED WOODEN HANDLE. OVERALL LENGTH 7 3/4contract · Last action 2009-01-09$17,765
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2014-11-19$16,723
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-08-07$16,275
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-01-28$13,852
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-11-15$11,375
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-11-15$10,850
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$10,200
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$10,200
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$10,200
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$10,200
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$10,200
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$10,200
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-02-18$10,200
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-08-07$10,150
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-01-28$9,976
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-06-03$9,405
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-01-26$9,075
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-12-24$8,400
- General Services AdministrationBRUSH, WIRE, TOOTHBRUSH STYLE, CURVED WOOD HANDLE BRUSH WITH STAINLESS STEEL WIRE FILLER. PLASTIC SHcontract · Last action 2008-11-19$7,980
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-05-05$7,920
- General Services AdministrationBRUSH, WIRE, TOOTHBRUSH STYLE, CURVED WOOD HANDLE BRUSH WITH STAINLESS STEEL WIRE FILLER. PLASTIC SHcontract · Last action 2008-11-19$7,600
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-05-30$7,480
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-07-13$7,425
- General Services AdministrationBRUSH, WIRE, TOOTHBRUSH STYLE, CURVED WOOD HANDLE BRUSH WITH STAINLESS STEEL WIRE FILLER. PLASTIC SHcontract · Last action 2008-11-19$7,410
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-04-08$7,140
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDACCA-G4-09-5971SQ P/N 8138-SScontract · Last action 2009-09-18$6,732
- General Services AdministrationBRUSH, WIRE, TOOTHBRUSH STYLE, CURVED WOOD HANDLE BRUSH WITH STAINLESS STEEL WIRE FILLER. PLASTIC SHcontract · Last action 2008-11-19$6,650
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDACCA-G4-09-5971SQ P/N 8138-SScontract · Last action 2009-09-18$6,545
- General Services AdministrationBRUSH, WIRE, STAINLESS STEEL FILLER, TOOTHBRUSH STYLE. CURVED WOODEN HANDLE. OVERALL LENGTH 7 3/4contract · Last action 2009-01-09$6,545
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. SQA QSDLAC-G4-14-3307 E GORNELL&SONS P/N 8138-SS U/I DZcontract · Last action 2015-03-20$6,467
- General Services AdministrationTAS::47 4534 001::TAS BRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2010-11-11$6,435
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDACCA-G4-09-5971SQ P/N 3577contract · Last action 2009-09-25$6,358
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-10-03$6,300
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-04-03$6,300
- General Services AdministrationBRUSH, WIRE TOOTHBRUSH STYLE, CURVED WOOD HANDLE D BRUSH WITH STAINLESS WIRE FILLER AND SHALL CON FORM TO THE SALIENT CHARACTERISTICS LISTED IN TH E IPD (HANDLE&FILLER WIRE). TUFT HOLES 20 (3 R OWS WIDE, 7 HOLES LONG ON OUTSIDES, 6 ON INSIDE PACKAGED/PACKED PER ASTM 3951, MARKED PER FED-ST D 123 FOR GSA, MIL-STD 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" H EIGHT MAX. BPA QSDLAA-G4-7277-A-SQA GORDON BRUSH PN 3307 U/I DZcontract · Last action 2014-09-10$6,257
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-04-24$6,125
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2012-03-12$6,125
- General Services AdministrationBRUSH,WIRE: TOOTHPASTE STYLE,CURVED WOOD HAND- LED BRUSH W/STAINLESS STEEL WIRE FILLER. HANDLE: LENGTH-7-3/4 IN(+OR- 1/4 IN), WIDTH- 13/32 IN(+OR-1/8 IN), THICKNESS-3/8 IN (+ OR- 1/32 IN). FILLER WIRE:DIAM-0.006 IN(+OR-.001IN) WT.-0.0082 LBS,LENGTH-7/16 IN(-0,PLUS 1/16 IN) BRUSH HEAD LENGTH-1-1/4 IN(+OR-1/4 IN), STAIN- LESS STEEL. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD- 129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. " PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED" . RFQ QSDLAA-G4-09-0629-N P/N 8138-SScontract · Last action 2011-08-18$6,120
Federal contract dollars to this establishment. Primary NAICS: 339994 - BROOM, BRUSH, AND MOP MANUFACTURING. Last action: 2015-04-15. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-06-02 | Complaint | 2 | 2 | $2,800 | |
| 2023-06-02 | Complaint | 1 | 1 | $6,500 | |
| 1989-11-15 | Follow-up | 0 | — | $0 | |
| 1989-07-07 | Planned | 6 | 3 | $4,000 | |
| 1986-03-24 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in broom, brush, and mop manufacturing within IL, ordered by federal enforcement volume:
- ERIE BRUSH & MFG. CORPORATIONCHICAGO — 2 federal enforcement records
- QUINN BROOM WORKS, INC.GREENUP — 1 federal enforcement record
- MONAHAN SFI, LLCARCOLA — 1 federal enforcement record
- THE LIBMAN COMPANYARCOLA — 1 federal enforcement record
- SUNSTAR AMERICAS, INC.SCHAUMBURG — 1 federal enforcement record
- NCP ENTERPRISES LLC D/B/A O-CEDAR COMMERCIALPAXTON — 1 federal enforcement record
Related searches
- Broom, Brush, and Mop ManufacturingAll employers in this industry
- Employers in ILState-wide enforcement data
- Broom, Brush, and in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on E. GORNELL & SONS, LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is E. GORNELL & SONS, LLC's OSHA violation history?
- E. GORNELL & SONS, LLC has 5 OSHA inspections on record with 9 violations and $13,300 in total penalties.
- How does E. GORNELL & SONS, LLC's safety record compare to its industry?
- E. GORNELL & SONS, LLC operates in the broom, brush, and mop manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. E. GORNELL & SONS, LLC's self-reported DART rate is 0 compared to an industry average of 2.