Summary
DRAWN METAL PRODUCTS DIV MICRO has accumulated 22 OSHA violations across 2 inspections over 48 years of recorded history, with $1,281 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 76,453 employers. Inspection frequency runs at the 80th percentile. The most recent enforcement activity was recorded 44 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DRAWN METAL PRODUCTS DIV MICRO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 22 citations in this view · $1,281 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 C02 IA | 2 | 2 | $240 | Jan 1978 | Apr 1982 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $240 | Jan 1978 | Apr 1982 |
| 29 CFR 1910.0217 C01 I | 2 | 2 | $240 | Jan 1978 | Apr 1982 |
| 29 CFR 1910.0133 A01 | 2 | 2 | $140 | Jan 1978 | Apr 1982 |
| 29 CFR 1910.0219 B01 | 2 | 2 | $140 | Jan 1978 | Apr 1982 |
| 29 CFR 1910.0219 C03 | 2 | 2 | $80 | Jan 1978 | Apr 1982 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $100 | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0217 B07 VA | 1 | 1 | $100 | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0095 B01 | 1 | 1 | $1 | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | — | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0217 B08 III | 1 | 1 | — | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0217 B08 I | 1 | 1 | — | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0219 D01 | 1 | 1 | — | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0212 A04 | 1 | 1 | — | Jan 1978 | Jan 1978 |
| 29 CFR 1910.0309 A 011021 | 1 | 1 | — | Jan 1978 | Jan 1978 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 76,453 employers. This establishment has 22 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 44+ years. Most recent activity: 44 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DRAWN METAL PRODUCTS DIV MICRO. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1982-03-09 | Follow-up | 6 | 5 | $200 | |
| 1977-11-29 | Complaint | 16 | 8 | $1,081 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in ILState-wide enforcement data
About this data
This profile aggregates federal enforcement records on DRAWN METAL PRODUCTS DIV MICRO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DRAWN METAL PRODUCTS DIV MICRO's OSHA violation history?
- DRAWN METAL PRODUCTS DIV MICRO has 2 OSHA inspections on record with 22 violations and $1,281 in total penalties.