Establishment profile
DIMENSION FABRICATORS, INC.
2000 7TH ST., SCOTIA, NY, 12302
332312 — Fabricated Structural Metal Manufacturing
EIN 141662895
Summary
DIMENSION FABRICATORS, INC. has accumulated 6 OSHA violations across 5 inspections over 15 years of recorded history, with $17,700 in total assessed penalties.
The establishment sits in the 51st percentile for violations within its industry-state peer group of 577 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DIMENSION FABRICATORS, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
40% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 5 distinct standards shown · 6 citations in this view · $17,700 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0023 C01 | 2 | 2 | $6,580 | Jun 2011 | Feb 2015 |
| 29 CFR 1910.0022 A02 | 1 | 1 | $3,500 | Jun 2011 | Jun 2011 |
| 29 CFR 1910.0179 G01 V | 1 | 1 | $2,860 | Jun 2011 | Jun 2011 |
| 29 CFR 1910.0179 G02 I | 1 | 1 | $2,380 | Jun 2011 | Jun 2011 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | $2,380 | Jun 2011 | Jun 2011 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3323 within NY. Peer group: 577 employers. This establishment has 6 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 93 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Feb 2019 – Aug 2020
Most frequent event: Collision between a moving and standing vehicle, nonroadway
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 26, 2020 | Struck by swinging or slipping object, other than handheld, n.e.c. | Arm(s), unspecified | Hospitalized | |
| Feb 4, 2019 | Collision between a moving and standing vehicle, nonroadway | Hand(s), unspecified | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Feb 4, 2019 | Caught Between,Forklift,Fracture,Hand,Laceration,Tractor Trailer | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DIMENSION FABRICATORS, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DIMENSION FABRICATORS, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DIMENSION FABRICATORS, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DIMENSION FABRICATORS, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DIMENSION FABRICATORS, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
DIMENSION FABRICATORS 2000 7TH ST · SCOTIA, NY, 12302 | Air | No Violation Identified | 0 | 0 | — | Jun 2013 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-02-07 | Referral | 0 | — | $0 | |
| 2019-02-07 | Follow-up | 0 | — | $0 | |
| 2017-04-25 | Complaint | 0 | — | $0 | |
| 2015-01-29 | Planned | 1 | — | $4,200 | |
| 2011-04-14 | Complaint | 5 | 4 | $13,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fabricated structural metal manufacturing within NY, ordered by federal enforcement volume:
- APOLLO STEEL CORP.NIAGARA FALLS — 3 federal enforcement records
- WATSON BOWMAN ACME CORP.AMHERST — 3 federal enforcement records
- APOLLO STEEL CORPORATIONCLARENCE — 3 federal enforcement records
- OCEAN STEEL CORPORATIONCONKLIN — 2 federal enforcement records
- ALP STEEL CORPORATIONBUFFALO — 2 federal enforcement records
- AUSTIN MOHAWK AND COMPANY, LLCUTICA — 2 federal enforcement records
- WILTSIE CONSTRUCTION CO INCOSWEGO — 2 federal enforcement records
- SOLVAY IRON WORKS INC.SYRACUSE — 2 federal enforcement records
- TCS INDUSTRIES INCROCHESTER — 2 federal enforcement records
- JAMESTOWN FABRICATED STEEL. INC.JAMESTOWN — 2 federal enforcement records
Related searches
- Fabricated Structural Metal ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- Fabricated Structural Metal in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DIMENSION FABRICATORS, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DIMENSION FABRICATORS, INC.'s OSHA violation history?
- DIMENSION FABRICATORS, INC. has 5 OSHA inspections on record with 6 violations and $17,700 in total penalties.
- How does DIMENSION FABRICATORS, INC.'s safety record compare to its industry?
- DIMENSION FABRICATORS, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4. DIMENSION FABRICATORS, INC.'s self-reported DART rate is 8.52 compared to an industry average of 1.8.