Establishment profile
DIMATIC DIE & TOOL CO
9520 N 48TH STREET, OMAHA, NE, 68152
326199 — All Other Plastics Product Manufacturing
EIN 470529823
Summary
DIMATIC DIE & TOOL CO has accumulated 26 OSHA violations across 7 inspections over 52 years of recorded history, with $28,410 in total assessed penalties.
The establishment sits in the 87th percentile for violations within its industry-state peer group of 64 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DIMATIC DIE & TOOL CO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
86% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $28,410 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $2,818 | Jun 1974 | Feb 2011 |
| 29 CFR 1910.0138 A | 1 | 1 | $3,750 | Jun 2023 | Jun 2023 |
| 29 CFR 1910.0106 D04 I | 1 | 1 | $3,750 | Jun 2023 | Jun 2023 |
| 29 CFR 1910.0178 M03 | 1 | 1 | $3,500 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0178 G02 | 1 | 1 | $3,000 | Jul 2023 | Jul 2023 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | $2,380 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $2,380 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0178 L06 | 1 | 1 | $1,785 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,770 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $1,770 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0101 B | 1 | 1 | $1,416 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | $45 | Jun 1974 | Jun 1974 |
| 29 CFR 1910.0106 E02 IIB1 | 1 | 1 | $45 | Jun 1974 | Jun 1974 |
| 29 CFR 1910.0147 C04 II D | 1 | 1 | — | Jul 2023 | Jul 2023 |
| 29 CFR 1910.1026 D01 | 1 | 1 | — | Jun 2023 | Jun 2023 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Jun 2023 | Jun 2023 |
| 29 CFR 1904.0032 B03 | 1 | 1 | — | Feb 2011 | Feb 2011 |
| 29 CFR 1904.0029 B01 | 1 | 1 | — | Feb 2011 | Feb 2011 |
| 29 CFR 1910.1200 H02 IV | 1 | 1 | — | Apr 1988 | Apr 1988 |
| 29 CFR 1910.1200 H02 II | 1 | 1 | — | Apr 1988 | Apr 1988 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3261 within NE. Peer group: 64 employers. This establishment has 26 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 65 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jan 2021 – Jan 2023
Most frequent event: Fall on same level due to slipping
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jan 13, 2023 | Fall on same level, unspecified | Lower leg(s) | Hospitalized | |
| Sep 20, 2021 | Fall on same level due to slipping | Hip(s) | Hospitalized | |
| Jan 11, 2021 | Struck by object or equipment, unspecified | Fingertip(s) | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DIMATIC DIE & TOOL CO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DIMATIC DIE & TOOL CO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DIMATIC DIE & TOOL CO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DIMATIC DIE & TOOL CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DIMATIC DIE & TOOL CO. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DIMATIC DIE & TOOL CO. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-03-31 | Referral | 4 | 2 | $7,500 | |
| 2023-03-20 | Complaint | 2 | 1 | $3,000 | |
| 2013-03-05 | Planned | 3 | 3 | $4,957 | |
| 2011-01-05 | Planned | 7 | 5 | $12,863 | |
| 1988-04-19 | Complaint | 5 | — | $0 | |
| 1985-03-08 | Planned | 0 | — | $0 | |
| 1974-06-24 | Planned | 5 | — | $90 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other plastics product manufacturing within NE, ordered by federal enforcement volume:
- PREMIER PLASTICS INCOMAHA — 2 federal enforcement records
- ACCUMA CORPORATIONBEATRICE — 2 federal enforcement records
- FIBERGLASS PRODUCTS, INC.AURORA — 2 federal enforcement records
- AIRLITE PLASTICS COMPANYOMAHA — 2 federal enforcement records
- A-1 FIBERGLASS AURORA INC.AURORA — 2 federal enforcement records
- MOLEX INCORPORATEDLINCOLN — 2 federal enforcement records
- LENCO PMCWAVERLY — 1 federal enforcement record
- HTI PLASTICSLINCOLN — 1 federal enforcement record
- DENVER PLASTICS NEWAHOO — 1 federal enforcement record
- TRIAD PRODUCTS COMPANY LLCHASTINGS — 1 federal enforcement record
Related searches
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in NEState-wide enforcement data
- All Other Plastics in NEIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DIMATIC DIE & TOOL CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DIMATIC DIE & TOOL CO's OSHA violation history?
- DIMATIC DIE & TOOL CO has 7 OSHA inspections on record with 26 violations and $28,409.7 in total penalties.
- How does DIMATIC DIE & TOOL CO's safety record compare to its industry?
- DIMATIC DIE & TOOL CO operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. DIMATIC DIE & TOOL CO's self-reported DART rate is 0 compared to an industry average of 1.8.