Establishment profile
DIENAMIC TOOL & DIE INC.
102 WHALLEY DRIVE, JACKSON, TN, 38301
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
Summary
DIENAMIC TOOL & DIE INC. has accumulated 19 OSHA violations across 3 inspections over 7 years of recorded history, with $36,200 in total assessed penalties.
The establishment sits in the 73rd percentile for violations within its industry-state peer group of 279 employers. Inspection frequency runs at the 63rd percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DIENAMIC TOOL & DIE INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 19 citations in this view · $36,200 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C07 I B | 2 | 2 | $4,200 | Jun 2019 | Feb 2020 |
| 29 CFR 1910.0217 E01 I A | 1 | 1 | $8,000 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0217 B07 V A | 1 | 1 | $4,000 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0217 E01 II A | 1 | 1 | $4,000 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $4,000 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0217 C02 III | 1 | 1 | $3,000 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0147 C07 I A | 1 | 1 | $2,100 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0151 C | 1 | 1 | $1,800 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0151 B | 1 | 1 | $1,800 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | $900 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0132 F01 | 1 | 1 | $450 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $450 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0132 D01 | 1 | 1 | $300 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0138 A | 1 | 1 | $300 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0178 L01 II | 1 | 1 | $300 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | $300 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | $300 | Jun 2019 | Jun 2019 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Jun 2019 | Jun 2019 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3329 within TN. Peer group: 279 employers. This establishment has 19 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DIENAMIC TOOL & DIE INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DIENAMIC TOOL & DIE INC.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Apr 8, 2019 | Amputated,Amputation,Caught Between,Caught In,Die,Finger,Gasket,Hand,Mechanical Power Press,Power Press,Press,Rail,Thumb | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DIENAMIC TOOL & DIE INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DIENAMIC TOOL & DIE INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DIENAMIC TOOL & DIE INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DIENAMIC TOOL & DIE INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DIENAMIC TOOL & DIE INC.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2020-12-14 | Follow-up | 0 | — | $0 | |
| 2020-01-09 | Follow-up | 1 | — | $4,200 | |
| 2019-04-11 | Referral | 18 | 8 | $32,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous fabricated metal product manufacturing within TN, ordered by federal enforcement volume:
- B & E MACHINE INCLA VERGNE — 2 federal enforcement records
- LISEGA INC.KODAK — 2 federal enforcement records
- WAYMATIC INCSOUTH FULTON — 2 federal enforcement records
- BROOKS MACHINE COMPANY INCCOLUMBIA — 2 federal enforcement records
- DYER TOOL & DIE INCMARYVILLE — 1 federal enforcement record
- PRECISION LADDERS LLCMORRISTOWN — 1 federal enforcement record
- VALLEY WEST WELDING CO INCWAVERLY — 1 federal enforcement record
- PRESTIGE SALES COMPANY, INC.CHATTANOOGA — 1 federal enforcement record
- KRONOS ENERGY SOLUTIONS, LLCCORDOVA — 1 federal enforcement record
- WORTHINGTON INDUSTRIES ENGINEERED CABS INCGREENEVILLE — 1 federal enforcement record
Related searches
- All Other Miscellaneous Fabricated Metal Product ManufacturingAll employers in this industry
- Employers in TNState-wide enforcement data
- All Other Miscellaneous in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DIENAMIC TOOL & DIE INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DIENAMIC TOOL & DIE INC.'s OSHA violation history?
- DIENAMIC TOOL & DIE INC. has 3 OSHA inspections on record with 19 violations and $36,200 in total penalties.
- How does DIENAMIC TOOL & DIE INC.'s safety record compare to its industry?
- DIENAMIC TOOL & DIE INC. operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6.