Establishment profile
DIENAMIC TOOL & DIE INC
4440 HWY. 70, CEDAR GROVE, TN, 38321
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
Summary
DIENAMIC TOOL & DIE INC has accumulated 40 OSHA violations across 4 inspections over 25 years of recorded history, with $10,550 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 277 employers. Inspection frequency runs at the 74th percentile. The most recent enforcement activity was recorded 15 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DIENAMIC TOOL & DIE INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 27 citations in this view · $10,450 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 B09 | 3 | 3 | — | Jul 2001 | Jun 2007 |
| 29 CFR 1910.0215 A04 | 2 | 2 | $1,650 | Jul 2001 | May 2004 |
| 29 CFR 1910.0151 B | 2 | 2 | $900 | May 2004 | Nov 2010 |
| 29 CFR 1910.1200 H01 | 2 | 2 | $600 | Jul 2001 | Nov 2010 |
| 29 CFR 1910.0157 G02 | 2 | 2 | $100 | Jun 2007 | Nov 2010 |
| 29 CFR 9000.7 | 2 | 2 | $100 | May 2004 | Jun 2007 |
| 29 CFR 1910.0184 E03 I | 1 | 1 | $1,400 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $1,200 | May 2004 | May 2004 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | $1,000 | Jun 2007 | Jun 2007 |
| 29 CFR 1910.0133 A02 | 1 | 1 | $800 | May 2004 | May 2004 |
| 29 CFR 1910.0217 B06 I | 1 | 1 | $600 | Jul 2001 | Jul 2001 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $600 | Jul 2001 | Jul 2001 |
| 29 CFR 3000.327 A | 1 | 1 | $400 | Nov 2010 | Nov 2010 |
| 29 CFR 3000.327 B 1 | 1 | 1 | $400 | May 2004 | May 2004 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $200 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0242 B | 1 | 1 | $100 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | $100 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.1030 C01 I | 1 | 1 | $100 | Jun 2007 | Jun 2007 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $100 | Jun 2007 | Jun 2007 |
| 29 CFR 1910.0022 D01 | 1 | 1 | $100 | May 2004 | May 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3329 within TN. Peer group: 277 employers. This establishment has 40 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DIENAMIC TOOL & DIE INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DIENAMIC TOOL & DIE INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DIENAMIC TOOL & DIE INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DIENAMIC TOOL & DIE INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DIENAMIC TOOL & DIE INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DIENAMIC TOOL & DIE INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DIENAMIC TOOL & DIE INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DIENAMIC TOOL & DIE INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-09-29 | Planned | 9 | 3 | $3,000 | |
| 2007-05-22 | Planned | 10 | 2 | $1,300 | |
| 2004-03-18 | Planned | 13 | 6 | $4,600 | |
| 2001-04-26 | Planned | 8 | 4 | $1,650 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous fabricated metal product manufacturing within TN, ordered by federal enforcement volume:
- B & E MACHINE INCLA VERGNE — 2 federal enforcement records
- LISEGA INC.KODAK — 2 federal enforcement records
- WAYMATIC INCSOUTH FULTON — 2 federal enforcement records
- BROOKS MACHINE COMPANY INCCOLUMBIA — 2 federal enforcement records
- DYER TOOL & DIE INCMARYVILLE — 1 federal enforcement record
- PRECISION LADDERS LLCMORRISTOWN — 1 federal enforcement record
- VALLEY WEST WELDING CO INCWAVERLY — 1 federal enforcement record
- PRESTIGE SALES COMPANY, INC.CHATTANOOGA — 1 federal enforcement record
- KRONOS ENERGY SOLUTIONS, LLCCORDOVA — 1 federal enforcement record
- WORTHINGTON INDUSTRIES ENGINEERED CABS INCGREENEVILLE — 1 federal enforcement record
Related searches
- All Other Miscellaneous Fabricated Metal Product ManufacturingAll employers in this industry
- Employers in TNState-wide enforcement data
- All Other Miscellaneous in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DIENAMIC TOOL & DIE INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DIENAMIC TOOL & DIE INC's OSHA violation history?
- DIENAMIC TOOL & DIE INC has 4 OSHA inspections on record with 40 violations and $10,550 in total penalties.
- How does DIENAMIC TOOL & DIE INC's safety record compare to its industry?
- DIENAMIC TOOL & DIE INC operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6.