Skip to main content

Establishment profile

DESIGNER MARBLE OF COLORADO, INC.

190 S TAFT STREET, LAKEWOOD, CO, 80228
327991Cut Stone and Stone Product Manufacturing

Download as PDF →

OSHA inspections
4
over 20 years
Violations
56
$21,545 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
1 National Emphasis Program inspections · 2 OSHA follow-ups

Summary

DESIGNER MARBLE OF COLORADO, INC. has accumulated 56 OSHA violations across 4 inspections over 20 years of recorded history, with $21,545 in total assessed penalties.

The establishment sits in the 100th percentile for violations within its industry-state peer group of 313 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 9 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

DESIGNER MARBLE OF COLORADO, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
4
0.2 / yr · last 20 yrs
Violations
56
2.8 / yr
Penalties
$21,545
$385 avg / violation
80% serious20% other
Inspection trigger · follow-up
2 of 4
Inspection trigger · referral
1 of 4

100% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 35 citations in this view · $20,650 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0133 A0133$1,650Sep 2006Mar 2017
29 CFR 1910.0134 E0133$1,635Sep 2006Mar 2017
29 CFR 1910.0303 G02 IB22$2,150Sep 2006Nov 2008
29 CFR 1910.0305 B0222$1,750Sep 2006Mar 2017
29 CFR 1910.0305 B0122$1,500Sep 2006Mar 2017
29 CFR 1910.0106 E02 IIA22$1,375Sep 2006Jan 2008
29 CFR 1910.0107 B0222$1,025Sep 2006Nov 2008
29 CFR 1910.0022 A0222$900Sep 2006Mar 2017
29 CFR 1910.0213 D0122$835Sep 2006Nov 2008
29 CFR 1910.0242 B22$835Sep 2006Nov 2008
29 CFR 1910.0178 L01 II22$835Sep 2006Nov 2008
29 CFR 1910.0132 D0122$375Sep 2006Nov 2008
29 CFR 1910.0107 G0222Sep 2006Nov 2008
29 CFR 1910.0303 B0111$2,400Mar 2017Mar 2017
29 CFR 1910.0106 E02 II A11$1,000Mar 2017Mar 2017
29 CFR 1910.0107 C0611$1,000Mar 2017Mar 2017
29 CFR 1910.0151 C11$375Sep 2006Sep 2006
29 CFR 1910.0253 B02 II11$375Sep 2006Sep 2006
29 CFR 1910.0303 B0211$375Sep 2006Sep 2006
29 CFR 1910.1200 E0111$260Sep 2006Sep 2006

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

100th

Worse on violations than nearly every other employer in NAICS 3279 within CO. Peer group: 313 employers. This establishment has 56 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
96th
peer median: $1,500
Inspection frequency
93rd
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
6.2
BLS SOII 2024
Industry avg DART
2.5
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Referral
1
Follow-up
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
9 years ago

No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DESIGNER MARBLE OF COLORADO, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2017-02-06Planned1413$8,000
2008-10-16Follow-up123$5,000
2008-01-16Follow-up1$1,000
2006-06-24Referral2929$7,545

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in cut stone and stone product manufacturing within CO, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on DESIGNER MARBLE OF COLORADO, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is DESIGNER MARBLE OF COLORADO, INC.'s OSHA violation history?
DESIGNER MARBLE OF COLORADO, INC. has 4 OSHA inspections on record with 56 violations and $21,545 in total penalties.
How does DESIGNER MARBLE OF COLORADO, INC.'s safety record compare to its industry?
DESIGNER MARBLE OF COLORADO, INC. operates in the cut stone and stone product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 6.2.