Summary
DELTA MAINTENANCE & WELDING has accumulated 24 OSHA violations across 1 inspection over 50 years of recorded history, with $250 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 71,900 employers. The most recent enforcement activity was recorded 50 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DELTA MAINTENANCE & WELDING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $250 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0309 A 004004 | 1 | 1 | $45 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0178 G07 | 1 | 1 | $40 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $35 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0252 B04 IXC | 1 | 1 | $35 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0134 D02 II | 1 | 1 | $35 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $30 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0309 A 025045 | 1 | 1 | $30 | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0180 I05 | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1904.0002 | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0219 D01 | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0219 F01 I | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0252 A02 II | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0252 A02 III | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0252 B04 IXA | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0252 B04 VIII | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0212 A05 | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1904.0005 | 1 | 1 | — | Nov 1975 | Nov 1975 |
| 29 CFR 1910.0022 A01 | 1 | 1 | — | Nov 1975 | Nov 1975 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 71,900 employers. This establishment has 24 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DELTA MAINTENANCE & WELDING. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DELTA MAINTENANCE & WELDING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 50+ years. Most recent activity: 50 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DELTA MAINTENANCE & WELDING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DELTA MAINTENANCE & WELDING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DELTA MAINTENANCE & WELDING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DELTA MAINTENANCE & WELDING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DELTA MAINTENANCE & WELDING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DELTA MAINTENANCE & WELDING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1975-11-12 | Complaint | 24 | — | $250 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in FLState-wide enforcement data
About this data
This profile aggregates federal enforcement records on DELTA MAINTENANCE & WELDING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DELTA MAINTENANCE & WELDING's OSHA violation history?
- DELTA MAINTENANCE & WELDING has 1 OSHA inspection on record with 24 violations and $250 in total penalties.