Establishment profile
DAVIS MACHINE WORKS OF OPELIKA, INC.
1318 LEE ROAD 42, OPELIKA, AL, 36804
332710 — Machine Shops
Summary
DAVIS MACHINE WORKS OF OPELIKA, INC. has accumulated 21 OSHA violations across 2 inspections over 13 years of recorded history, with $12,600 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 152 employers. Inspection frequency runs at the 56th percentile. The most recent enforcement activity was recorded 2 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DAVIS MACHINE WORKS OF OPELIKA, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $12,600 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 5A0001 | 1 | 1 | $1,400 | May 2013 | May 2013 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,400 | May 2013 | May 2013 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $1,400 | May 2013 | May 2013 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $1,400 | May 2013 | May 2013 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $1,400 | May 2013 | May 2013 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $1,120 | May 2013 | May 2013 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,120 | May 2013 | May 2013 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $1,120 | May 2013 | May 2013 |
| 29 CFR 1910.0106 E09 III | 1 | 1 | $1,120 | May 2013 | May 2013 |
| 29 CFR 1910.0303 B07 I | 1 | 1 | $1,120 | May 2013 | May 2013 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0134 G01 I A | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0305 B02 I | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0179 K02 | 1 | 1 | — | May 2013 | May 2013 |
| 29 CFR 1910.0134 C01 | 1 | 1 | — | May 2013 | May 2013 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within AL. Peer group: 152 employers. This establishment has 21 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 22 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DAVIS MACHINE WORKS OF OPELIKA, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DAVIS MACHINE WORKS OF OPELIKA, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DAVIS MACHINE WORKS OF OPELIKA, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DAVIS MACHINE WORKS OF OPELIKA, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DAVIS MACHINE WORKS OF OPELIKA, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DAVIS MACHINE WORKS OF OPELIKA, INC.. Verify directly with Environmental Protection Agency →
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2017-04-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-01-31 | Planned | 0 | — | $0 | |
| 2013-01-10 | Planned | 21 | 14 | $12,600 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within AL, ordered by federal enforcement volume:
- JACKSON METALWORKS, INC.JACKSON — 2 federal enforcement records
- AXIS WELDING & MACHINE WORKS, INC.CREOLA — 2 federal enforcement records
- ALCO MACHINE COMPANY, INC.BIRMINGHAM — 2 federal enforcement records
- ConstelliumMuscle Shoals — 2 federal enforcement records
- HAYNES MACHINE CO.OXFORD — 2 federal enforcement records
- SOUTHEASTERN EXTRUSION & TOOL, INC.FLORENCE — 2 federal enforcement records
- G-UB-MK CONSTRUCTORSMUSCLE SHOALS — 2 federal enforcement records
- AMERICAN MACHINE & MANUFACTURING, INC.ABBEVILLE — 2 federal enforcement records
- MACHINE AND HYDRAULICS, INC.GARDENDALE — 1 federal enforcement record
- ALL - TECH MACHINING INCWILMER — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in ALState-wide enforcement data
- Machine Shops in ALIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DAVIS MACHINE WORKS OF OPELIKA, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DAVIS MACHINE WORKS OF OPELIKA, INC.'s OSHA violation history?
- DAVIS MACHINE WORKS OF OPELIKA, INC. has 2 OSHA inspections on record with 21 violations and $12,600 in total penalties.
- How does DAVIS MACHINE WORKS OF OPELIKA, INC.'s safety record compare to its industry?
- DAVIS MACHINE WORKS OF OPELIKA, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. DAVIS MACHINE WORKS OF OPELIKA, INC.'s self-reported DART rate is 4.4 compared to an industry average of 1.5.