Establishment profile
D & M WELDING, INCORPORATED
ROUTE 8 HOPEWELL ROAD, FAIRMONT, WV, 26555
332312 — Fabricated Structural Metal Manufacturing
Summary
D & M WELDING, INCORPORATED has accumulated 15 OSHA violations across 2 inspections over 21 years of recorded history, with $4,050 in total assessed penalties.
The establishment sits in the 67th percentile for violations within its industry-state peer group of 118 employers. Inspection frequency runs at the 44th percentile. The most recent enforcement activity was recorded 16 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
D & M WELDING, INCORPORATED appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 15 citations in this view · $4,050 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 1 | 1 | $700 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0107 C03 | 1 | 1 | $400 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0107 E02 | 1 | 1 | $400 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | $350 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0107 B10 | 1 | 1 | $350 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $350 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0107 B05 I | 1 | 1 | $350 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0022 A01 | 1 | 1 | $300 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0107 C05 | 1 | 1 | $300 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0134 D01 III | 1 | 1 | $300 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $250 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0145 C03 | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0134 L02 I | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0106 E02 II | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Aug 2004 | Aug 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3323 within WV. Peer group: 118 employers. This establishment has 15 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for D & M WELDING, INCORPORATED. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for D & M WELDING, INCORPORATED. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 16+ years. Most recent activity: 16 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for D & M WELDING, INCORPORATED. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for D & M WELDING, INCORPORATED. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for D & M WELDING, INCORPORATED. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for D & M WELDING, INCORPORATED. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for D & M WELDING, INCORPORATED. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for D & M WELDING, INCORPORATED. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-04-08 | Planned | 0 | — | $0 | |
| 2004-08-20 | Programmed Other | 15 | 14 | $4,050 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fabricated structural metal manufacturing within WV, ordered by federal enforcement volume:
- MARTIN STEEL INC.HUNTINGTON — 2 federal enforcement records
- VANCO WELDING & REPAIR, INC.GRAFTON — 2 federal enforcement records
- Boyce, Graybeal & Sayre, Inc.Mabscott — 2 federal enforcement records
- MCCORKLE MACHINE AND ENGINEERINGHUNTINGTON — 2 federal enforcement records
- WILSON WELDING COMPANY, INC.HUNTINGTON — 2 federal enforcement records
- JENNMAR CORPORATION OF WVREEDSVILLE — 1 federal enforcement record
- UNIVERSAL TECHNOLOGIES GROUPS LLCSHINNSTON — 1 federal enforcement record
- BISMARCK STEEL LLC DBA CHARLESTON STEELDUNBAR — 1 federal enforcement record
- ALPHA WELDING INC.HUNTINGTON — 1 federal enforcement record
- TRIPLE S CORPORATIONBECKLEY — 1 federal enforcement record
Related searches
- Fabricated Structural Metal ManufacturingAll employers in this industry
- Employers in WVState-wide enforcement data
- Fabricated Structural Metal in WVIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on D & M WELDING, INCORPORATED from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is D & M WELDING, INCORPORATED's OSHA violation history?
- D & M WELDING, INCORPORATED has 2 OSHA inspections on record with 15 violations and $4,050 in total penalties.
- How does D & M WELDING, INCORPORATED's safety record compare to its industry?
- D & M WELDING, INCORPORATED operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.