Establishment profile
D & D TOOLING AND MANUFACTURING
500 TERRITORIAL DRIVE, BOLINGBROOK, IL, 60440
Summary
D & D TOOLING AND MANUFACTURING has accumulated 23 OSHA violations across 4 inspections over 27 years of recorded history, with $13,689 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 232 employers. Inspection frequency runs at the 60th percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
D & D TOOLING AND MANUFACTURING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $13,689 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0095 B01 | 1 | 1 | $2,000 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,250 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0217 B13 | 1 | 1 | $1,250 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0178 M12 II | 1 | 1 | $1,200 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $1,150 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0110 F02 II | 1 | 1 | $1,000 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $800 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0038 A01 | 1 | 1 | $750 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $750 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0332 B01 | 1 | 1 | $750 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $500 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $500 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | $489 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0305 J04 IIE | 1 | 1 | $400 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.1200 H | 1 | 1 | $250 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0157 G02 | 1 | 1 | $250 | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0030 A02 | 1 | 1 | $200 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0178 L | 1 | 1 | $200 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0333 B02 I | 1 | 1 | — | Feb 1999 | Feb 1999 |
| 29 CFR 1910.0217 G | 1 | 1 | — | Feb 1999 | Feb 1999 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3321 within IL. Peer group: 232 employers. This establishment has 23 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for D & D TOOLING AND MANUFACTURING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for D & D TOOLING AND MANUFACTURING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for D & D TOOLING AND MANUFACTURING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for D & D TOOLING AND MANUFACTURING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for D & D TOOLING AND MANUFACTURING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for D & D TOOLING AND MANUFACTURING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for D & D TOOLING AND MANUFACTURING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for D & D TOOLING AND MANUFACTURING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-01-10 | Complaint | 5 | 3 | $2,489 | |
| 2005-04-27 | Complaint | 0 | — | $0 | |
| 1999-01-22 | Referral | 4 | 3 | $2,800 | |
| 1998-12-29 | Complaint | 14 | 13 | $8,400 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within IL, ordered by federal enforcement volume:
- SET ENTERPRISES, INC.SAUK VILLAGE — 4 federal enforcement records
- EATON ELECTRICAL INC.LINCOLN — 3 federal enforcement records
- ACCURATE PERFORATING COMPANYCHICAGO — 2 federal enforcement records
- PRINCIPAL MANUFACTURING CORP.BROADVIEW — 2 federal enforcement records
- MJ CELCO, INC.SCHILLER PARK — 2 federal enforcement records
- RTM TREND INC.FRANKLIN PARK — 2 federal enforcement records
- INTERPLEX DAYSTAR, INC.FRANKLIN PARK — 2 federal enforcement records
- ALPHA PRODUCTS, INC.CHICAGO — 2 federal enforcement records
- THE LINE GROUP, INC.ARLINGTON HTS — 2 federal enforcement records
- PETERSON MANUFACTURING CO., INC.PLAINFIELD — 2 federal enforcement records
Related searches
- NAICS 332All employers in this industry
- Employers in ILState-wide enforcement data
- Industry in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on D & D TOOLING AND MANUFACTURING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is D & D TOOLING AND MANUFACTURING's OSHA violation history?
- D & D TOOLING AND MANUFACTURING has 4 OSHA inspections on record with 23 violations and $13,688.95 in total penalties.