Skip to main content

Establishment profile

CUSTOM ENGINEERING COMPANY

2800 MCCLELLAND AVENUE, ERIE, PA, 16510
Operated by Custom Group
332312Fabricated Structural Metal Manufacturing
EIN 251008495

Download as PDF →

OSHA inspections
12
over 39 years
Violations
76
$20,938 in penalties
Penalties
$20,938
$276 avg
Accident investigations on record
2 hospitalizations · 2 National Emphasis Program inspections

Summary

CUSTOM ENGINEERING COMPANY has accumulated 76 OSHA violations across 12 inspections over 39 years of recorded history, with $20,938 in total assessed penalties.

The establishment sits in the 99th percentile for violations within its industry-state peer group of 978 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 9 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CUSTOM ENGINEERING COMPANY appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
12
0.3 / yr · last 39 yrs
Violations
76
1.9 / yr
Penalties
$20,938
$276 avg / violation
71% serious29% other
Inspection trigger · complaint
4 of 12
Inspection trigger · referral
4 of 12

83% of inspections at this establishment produced violations, with 8 inspections producing serious-or-greater violations.

Peer comparison

99th

Worse on violations than nearly every other employer in NAICS 3323 within PA. Peer group: 978 employers. This establishment has 76 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
93rd
peer median: $1,788
Inspection frequency
97th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
9.4
vs industry
+7.6
TRIR
9.4
vs industry
+6.0

Reported for 92 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
9.4
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Complaint
4
Referral
4

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Feb 2017

Reports
1
Hospitalizations
1
Amputations
0
Eye losses
0

Most frequent event: Struck by object falling from vehicle or machinery-other than vehicle part

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Feb 10, 2017Struck by object falling from vehicle or machinery-other than vehicle partFoot (feet), unspecifiedHospitalized

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Feb 10, 2017Crane Hook,Falling Object,Foot,Fracture,Overhead Crane,Storage Rack,Struck By11
May 31, 2007AMPUTATED,WELDER,FALLING OBJECT,LEG11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
9 years ago

No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CUSTOM ENGINEERING COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CUSTOM ENGINEERING COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CUSTOM ENGINEERING COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for CUSTOM ENGINEERING COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CUSTOM ENGINEERING COMPANY. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
273876
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CUSTOM ENGINEERING COMPANY. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$15K
Awards
1
Top agency
Department of Defense
$15K
Company-wide — CUSTOM ENGINEERING CO (across 2 entities)
Obligated (5-yr)
$0
Obligated (all-time)
$70K
Awards (all-time)
2

Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.

Largest awards
  • Department of Defense
    MACHINE REPAIR
    contract · Last action 2011-05-19
    $14,700

Federal contract dollars to this establishment. Primary NAICS: 811310 - COMMERCIAL AND INDUSTRIAL MACHINERY AND EQUIPMENT (EXCEPT AUTOMOTIVE AND ELECTRONIC) REPAIR AND MAINTENANCE. Last action: 2011-05-19. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2017-02-15Referral11$3,970
2008-04-08Complaint43$2,680
2007-06-01Referral66$3,800
2007-04-17Complaint0$0
2006-10-25Planned1$0
2000-10-03Planned33$1,170
1998-12-22Planned0$0
1996-06-06Referral11$518
1994-03-09Referral1$0
1993-03-16Complaint3121$8,000
1990-05-09Complaint31$80
1987-04-16Planned2518$720

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

CUSTOM ENGINEERING COMPANY is one of 1 establishments rolled up under the parent organization Custom Group.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Custom Group across all 1 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within PA, ordered by federal enforcement volume:

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on CUSTOM ENGINEERING COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Custom Group.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is CUSTOM ENGINEERING COMPANY's OSHA violation history?
CUSTOM ENGINEERING COMPANY has 12 OSHA inspections on record with 76 violations and $20,938 in total penalties.
How does CUSTOM ENGINEERING COMPANY's safety record compare to its industry?
CUSTOM ENGINEERING COMPANY operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4. CUSTOM ENGINEERING COMPANY's self-reported DART rate is 9.41 compared to an industry average of 1.8.