Skip to main content

Establishment profile

CROWN TECHNICAL SYSTEMS

13470 PHILADELPHIA AVENUE, FONTANA, CA, 92337
333318Other Commercial and Service Industry Machinery Manufacturing
EIN 330775810

Download as PDF →

OSHA inspections
2
over 7 years
Violations
4
$2,245 in penalties
Penalties
$2,245
$561 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.

Summary

CROWN TECHNICAL SYSTEMS has accumulated 4 OSHA violations across 2 inspections over 7 years of recorded history, with $2,245 in total assessed penalties.

The establishment sits in the 60th percentile for violations within its industry-state peer group of 118 employers. Inspection frequency runs at the 79th percentile. The most recent enforcement activity was recorded 2 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CROWN TECHNICAL SYSTEMS appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
2
0.3 / yr · last 7 yrs
Violations
4
0.6 / yr
Penalties
$2,245
$561 avg / violation
Inspection trigger · accident
2 of 2

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $2,245 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
3384(B)11$750May 2024May 2024
6151(C)(1)11$560Jan 2019Jan 2019
6151(E)(2)11$560Jan 2019Jan 2019
3664(A)11$375Jan 2019Jan 2019

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

60th

Above average violations in NAICS 3333 within CA. Peer group: 118 employers. This establishment has 4 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
64th
peer median: $768
Inspection frequency
79th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
2.1
vs industry
+0.8
TRIR
2.1
vs industry
−0.4

Reported for 262 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.5
BLS SOII 2024
Industry avg DART
1.3
BLS SOII 2024
Self-reported TRIR
2.1
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Accident
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CROWN TECHNICAL SYSTEMS. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Aug 15, 2018Amputated,Amputation,Board,Caught Between,Finger,Pallet1

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
2 years ago

No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CROWN TECHNICAL SYSTEMS. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CROWN TECHNICAL SYSTEMS. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CROWN TECHNICAL SYSTEMS. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CROWN TECHNICAL SYSTEMS. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

EPA inspections
0
Quarters non-compliant
12

EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: Violation Identified.

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
CROWN TECHNICAL SYSTEMS
13470 PHILADELPHIA AVE · FONTANA, CA, 92337
WaterRCRAViolation Identified
QNCR 12
00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Motor carrier safety (FMCSA)

DOT number
1889525
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CROWN TECHNICAL SYSTEMS. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$1.7M
Obligated (all-time)
$2.9M
Awards
4
Top agency
Department of Energy
$2.9M

Federal contract dollars to this establishment. Primary NAICS: 332311 - PREFABRICATED METAL BUILDING AND COMPONENT MANUFACTURING. Last action: 2026-06-25. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2023-12-07Accident1$750
2018-08-31Accident3$1,495

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in other commercial and service industry machinery manufacturing within CA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CROWN TECHNICAL SYSTEMS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CROWN TECHNICAL SYSTEMS's OSHA violation history?
CROWN TECHNICAL SYSTEMS has 2 OSHA inspections on record with 4 violations and $2,245 in total penalties.
How does CROWN TECHNICAL SYSTEMS's safety record compare to its industry?
CROWN TECHNICAL SYSTEMS operates in the other commercial and service industry machinery manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.5. CROWN TECHNICAL SYSTEMS's self-reported DART rate is 2.12 compared to an industry average of 1.3.
CROWN TECHNICAL SYSTEMS — OSHA Violations & Safety Record | FastDOL