Establishment profile
CROWN PARTS & MACHINE
1733 HIGHWAY 87 EAST, BILLINGS, MT, 59101
332710 — Machine Shops
Summary
CROWN PARTS & MACHINE has accumulated 44 OSHA violations across 6 inspections over 40 years of recorded history, with $8,323 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 19 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CROWN PARTS & MACHINE appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $8,323 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1904.0002 A | 2 | 1 | $80 | Apr 1991 | Apr 1991 |
| 29 CFR 1910.1025 D02 | 2 | 2 | — | Oct 1986 | Apr 1991 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,968 | Apr 2018 | Apr 2018 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $2,375 | Apr 2018 | Apr 2018 |
| 29 CFR 1910.1025 C01 | 1 | 1 | $610 | Oct 1986 | Oct 1986 |
| 29 CFR 1910.1025 J01 I | 1 | 1 | $510 | Oct 1986 | Oct 1986 |
| 29 CFR 1910.0107 C05 | 1 | 1 | $460 | Oct 1986 | Oct 1986 |
| 29 CFR 1910.0094 D09 V | 1 | 1 | $460 | Oct 1986 | Oct 1986 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $460 | Oct 1986 | Oct 1986 |
| 29 CFR 1910.1000 A03 | 1 | 1 | $200 | Apr 1991 | Apr 1991 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | $200 | Apr 1991 | Apr 1991 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | Apr 2018 | Apr 2018 |
| 29 CFR 1910.0179 N04 I | 1 | 1 | — | May 1991 | May 1991 |
| 29 CFR 1910.0179 J02 IV | 1 | 1 | — | May 1991 | May 1991 |
| 29 CFR 1910.0134 B08 | 1 | 1 | — | Apr 1991 | Apr 1991 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | Apr 1991 | Apr 1991 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Apr 1991 | Apr 1991 |
| 29 CFR 1910.0134 A02 | 1 | 1 | — | Apr 1991 | Apr 1991 |
| 29 CFR 1910.1025 L02 I | 1 | 1 | — | Apr 1991 | Apr 1991 |
| 29 CFR 1910.1200 G08 | 1 | 1 | — | Apr 1991 | Apr 1991 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within MT. Peer group: 19 employers. This establishment has 44 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CROWN PARTS & MACHINE. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CROWN PARTS & MACHINE. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CROWN PARTS & MACHINE. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CROWN PARTS & MACHINE. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CROWN PARTS & MACHINE. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CROWN PARTS & MACHINE. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CROWN PARTS & MACHINE. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CROWN PARTS & MACHINE. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense8504525253!TENSIONER PULLEY AScontract · Last action 2017-06-27$7,737
Federal contract dollars to this establishment. Primary NAICS: 333923 - OVERHEAD TRAVELING CRANE, HOIST, AND MONORAIL SYSTEM MANUFACTURING. Last action: 2017-06-27. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-02-15 | Planned | 3 | 3 | $5,343 | |
| 1991-04-10 | Referral | 2 | — | $0 | |
| 1991-01-08 | Planned | 11 | 6 | $480 | |
| 1987-08-18 | Follow-up | 0 | — | $0 | |
| 1986-07-24 | Complaint | 28 | 14 | $2,500 | |
| 1986-01-03 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MT, ordered by federal enforcement volume:
- S & S MACHINE, INC.BILLINGS — 1 federal enforcement record
- BIG SKY PRECISION INC.MANHATTAN — 1 federal enforcement record
- R5 HOLDINGS, INC.BOZEMAN — 1 federal enforcement record
- MIDWEST STEEL INDUSTRIES, INC.BELGRADE — 1 federal enforcement record
- MONTANA RIFLEMAN, INC.KALISPELL — 1 federal enforcement record
- BITTERROOT TOOL & MACHINE, INC.STEVENSVILLE — 1 federal enforcement record
- HOGIN MACHINE, INC.GALLATIN GATEWAY — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MTState-wide enforcement data
- Machine Shops in MTIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CROWN PARTS & MACHINE from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CROWN PARTS & MACHINE's OSHA violation history?
- CROWN PARTS & MACHINE has 6 OSHA inspections on record with 44 violations and $8,323 in total penalties.
- How does CROWN PARTS & MACHINE's safety record compare to its industry?
- CROWN PARTS & MACHINE operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.