Establishment profile
CONNECTICUT STAMPING AND BENDING, INC.
206 NEWINGTON AVENUE, NEW BRITAIN, CT, 06051
332996 — Fabricated Pipe and Pipe Fitting Manufacturing
Summary
CONNECTICUT STAMPING AND BENDING, INC. has accumulated 73 OSHA violations across 5 inspections over 34 years of recorded history, with $47,025 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 173 employers. Inspection frequency runs at the 85th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CONNECTICUT STAMPING AND BENDING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 26 citations in this view · $36,790 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 F05 I | 3 | 2 | $1,700 | Jan 1992 | May 1993 |
| 29 CFR 1910.0217 C01 I | 2 | 2 | $3,500 | Mar 1992 | Sep 2008 |
| 29 CFR 1910.0212 A02 | 2 | 2 | $3,500 | Mar 1992 | Sep 2008 |
| 29 CFR 1910.0212 A03 II | 2 | 2 | $2,275 | Jan 1992 | Mar 1992 |
| 29 CFR 1910.0147 C07 I | 2 | 2 | $650 | Jan 1992 | Sep 2008 |
| 29 CFR 1910.0217 B04 I | 1 | 1 | $3,500 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $2,450 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0304 G05 | 1 | 1 | $1,750 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0036 D01 | 1 | 1 | $1,750 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0217 E01 II | 1 | 1 | $1,750 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0304 G03 IA | 1 | 1 | $1,750 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,625 | Mar 1992 | Mar 1992 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $1,400 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0215 A01 | 1 | 1 | $1,400 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0023 D01 IV | 1 | 1 | $1,400 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | $1,400 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0217 B08 I | 1 | 1 | $1,400 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | $1,400 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.0217 B03 I | 1 | 1 | $1,140 | Mar 1992 | Mar 1992 |
| 29 CFR 1910.0134 B01 | 1 | 1 | $1,050 | Jan 1992 | Jan 1992 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3329 within CT. Peer group: 173 employers. This establishment has 73 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CONNECTICUT STAMPING AND BENDING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2008-09-09 | Referral | 3 | 2 | $4,200 | |
| 2008-06-23 | Planned | 14 | 13 | $24,150 | |
| 1993-01-06 | Follow-up | 2 | 2 | $375 | |
| 1991-10-22 | Unprogrammed Related | 38 | 27 | $8,125 | |
| 1991-09-09 | Planned | 16 | 14 | $10,175 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fabricated pipe and pipe fitting manufacturing within CT, ordered by federal enforcement volume:
- THE E.A. PATTEN COMPANYMANCHESTER — 1 federal enforcement record
Related searches
- Fabricated Pipe and Pipe Fitting ManufacturingAll employers in this industry
- Employers in CTState-wide enforcement data
- Fabricated Pipe and in CTIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CONNECTICUT STAMPING AND BENDING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CONNECTICUT STAMPING AND BENDING, INC.'s OSHA violation history?
- CONNECTICUT STAMPING AND BENDING, INC. has 5 OSHA inspections on record with 73 violations and $47,025 in total penalties.
- How does CONNECTICUT STAMPING AND BENDING, INC.'s safety record compare to its industry?
- CONNECTICUT STAMPING AND BENDING, INC. operates in the fabricated pipe and pipe fitting manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.1.