Skip to main content

Establishment profile

CONNECTICUT STAMPING AND BENDING COMPANY

206 NEWINGTON AVENUE, NEW BRITAIN, CT, 06050

Download as PDF →

OSHA inspections
5
over 46 years
Violations
68
$57,850 in penalties
Severe violator (proxy)
YES
FastDOL heuristic — not confirmation of formal OSHA SVEP listing.
Accident investigations on record
1 fatality · 3 National Emphasis Program inspections

Summary

CONNECTICUT STAMPING AND BENDING COMPANY has accumulated 68 OSHA violations across 5 inspections over 46 years of recorded history, with $57,850 in total assessed penalties.

The establishment sits in the 100th percentile for violations within its industry-state peer group of 24,964 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 24 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CONNECTICUT STAMPING AND BENDING COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.1 / yr · last 46 yrs
Violations
68
1.5 / yr
Penalties
$57,850
$851 avg / violation
82% serious18% other
Inspection trigger · complaint
2 of 5
Inspection trigger · accident
1 of 5

80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $49,265 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A0122$6,405Apr 2002Jun 2002
5A000121$3,840Jun 2002Jun 2002
29 CFR 1910.0212 A03 II22$3,200Apr 2002Jun 2002
29 CFR 1904.0039 A11$4,000Jun 2002Jun 2002
29 CFR 1910.0134 C0111$4,000Jun 2002Jun 2002
29 CFR 1910.0120 Q0211$4,000Jun 2002Jun 2002
29 CFR 1910.0217 C01 I11$3,200Jun 2002Jun 2002
29 CFR 1910.0217 C03 IVD11$3,200Jun 2002Jun 2002
29 CFR 1910.0146 C0111$3,200Jun 2002Jun 2002
29 CFR 1910.0217 B06 I11$1,600Jun 2002Jun 2002
29 CFR 1910.0023 A0411$1,600Jun 2002Jun 2002
29 CFR 1910.0307 B11$1,600Jun 2002Jun 2002
29 CFR 1910.0304 F0411$1,600Jun 2002Jun 2002
29 CFR 1910.0215 A0111$1,280Jun 2002Jun 2002
29 CFR 1910.0217 B03 I11$1,280Jun 2002Jun 2002
29 CFR 1910.0303 G02 I11$1,280Jun 2002Jun 2002
29 CFR 1910.0147 C04 I11$1,100Apr 2002Apr 2002
29 CFR 1910.0036 B0511$960Jun 2002Jun 2002
29 CFR 1910.0212 A0411$960Jun 2002Jun 2002
29 CFR 1910.0217 E01 I11$960Jun 2002Jun 2002

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

100th

Worse on violations than nearly every other employer. Peer group: 24,964 employers. This establishment has 68 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
100th
peer median: $0
Inspection frequency
98th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with OSHA Injury Tracking Application

Inspection breakdown

Planned
1
Complaint
2
Accident
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Apr 24, 2002HEAD,CYLINDER,MOLDING MACHINE,CAUGHT BETWEEN,CRUSHED,CASTING DIEFatality11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
24 years ago

No federal enforcement activity has been recorded against this establishment in 24+ years. Most recent activity: 24 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CONNECTICUT STAMPING AND BENDING COMPANY. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
2002-04-30Unprogrammed Related4339$41,040
2002-04-25Accident159$12,560
2002-03-27Complaint76$3,850
1982-07-19Planned0$0
1980-05-07Complaint32$400

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on CONNECTICUT STAMPING AND BENDING COMPANY from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CONNECTICUT STAMPING AND BENDING COMPANY's OSHA violation history?
CONNECTICUT STAMPING AND BENDING COMPANY has 5 OSHA inspections on record with 68 violations and $57,850 in total penalties.
Has CONNECTICUT STAMPING AND BENDING COMPANY had any workplace fatalities?
Yes. Federal records show 1 fatality investigation involving CONNECTICUT STAMPING AND BENDING COMPANY.