Skip to main content

Establishment profile

CMC ALAMO STEEL

2784 OLD DALLAS ROAD, WACO, TX, 76705
332312Fabricated Structural Metal Manufacturing

Download as PDF →

OSHA inspections
7
over 37 years
Violations
33
$12,270 in penalties
Penalties
$12,270
$372 avg
Accident investigations on record
4 National Emphasis Program inspections · 1 OSHA follow-up

Summary

CMC ALAMO STEEL has accumulated 33 OSHA violations across 7 inspections over 37 years of recorded history, with $12,270 in total assessed penalties.

The establishment sits in the 97th percentile for violations within its industry-state peer group of 1,110 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CMC ALAMO STEEL appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
7
0.2 / yr · last 37 yrs
Violations
33
0.9 / yr
Penalties
$12,270
$372 avg / violation
58% serious42% other
Inspection trigger · planned
6 of 7
Inspection trigger · follow-up
1 of 7

86% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $12,270 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0107 E0222$200Jun 1989Mar 2008
29 CFR 1910.0305 B01 II11$1,300Mar 2008Mar 2008
29 CFR 1910.0303 G0111$975Mar 2008Mar 2008
29 CFR 1910.0252 B02 III11$975Sep 2003Sep 2003
29 CFR 1910.0305 A04 IV11$975Sep 2003Sep 2003
29 CFR 1904.0005 C11$900Sep 2003Sep 2003
29 CFR 1910.0147 C04 I11$780Feb 1999Feb 1999
29 CFR 1910.0305 B0111$780Feb 1999Feb 1999
29 CFR 1910.0094 C03 IA11$780Aug 1995Aug 1995
29 CFR 1910.0106 E02 IIB211$780Aug 1995Aug 1995
29 CFR 1910.0107 B05 I11$585Feb 1999Feb 1999
29 CFR 1910.0305 G02 III11$500Mar 2008Mar 2008
29 CFR 1910.0304 F0411$475Mar 2008Mar 2008
29 CFR 1910.0107 C0611$475Mar 2008Mar 2008
29 CFR 1910.0215 A0411$475Mar 2008Mar 2008
29 CFR 1910.0254 D09 III11$475Mar 2008Mar 2008
29 CFR 1910.0252 B04 IXC11$300Jun 1989Jun 1989
29 CFR 1910.0107 G0211$200Jun 1989Jun 1989
29 CFR 1910.0219 D0111$180Jun 1989Jun 1989
29 CFR 1910.0219 F0311$160Jun 1989Jun 1989

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

97th

Worse on violations than nearly every other employer in NAICS 3323 within TX. Peer group: 1,110 employers. This establishment has 33 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
82nd
peer median: $3,368
Inspection frequency
97th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for CMC ALAMO STEEL. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
6
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CMC ALAMO STEEL. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CMC ALAMO STEEL. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CMC ALAMO STEEL. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CMC ALAMO STEEL. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CMC ALAMO STEEL. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CMC ALAMO STEEL. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CMC ALAMO STEEL. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2007-11-01Planned146$4,675
2003-08-13Planned41$2,850
1999-02-12Planned22$585
1999-02-12Planned22$1,560
1995-06-13Planned22$1,560
1989-08-03Follow-up0$0
1989-06-01Planned96$1,040

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within TX, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CMC ALAMO STEEL from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CMC ALAMO STEEL's OSHA violation history?
CMC ALAMO STEEL has 7 OSHA inspections on record with 33 violations and $12,270 in total penalties.
How does CMC ALAMO STEEL's safety record compare to its industry?
CMC ALAMO STEEL operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.