Skip to main content
FastDOL

Establishment profile

CJT KOOLCARB, INC.

494 MISSION ST, CAROL STREAM, IL, 60188
333515 — Cutting Tool and Machine Tool Accessory Manufacturing

Download as PDF →

OSHA inspections
1
over 10 years
Violations
4
$11,000 in penalties
Penalties
$11,000
$2,750 avg

Summary

CJT KOOLCARB, INC. has accumulated 4 OSHA violations across 1 inspection over 10 years of recorded history, with $11,000 in total assessed penalties.

The establishment sits in the 44th percentile for violations within its industry-state peer group of 197 employers. The most recent enforcement activity was recorded 10 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CJT KOOLCARB, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
1
0.1 / yr · last 10 yrs
Violations
4
0.4 / yr
Penalties
$11,000
$2,750 avg / violation
100% serious0% other
Inspection trigger · complaint
1 of 1

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $11,000 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.1200 E0111$3,670Nov 2015Nov 2015
29 CFR 1910.0132 A11$3,665Nov 2015Nov 2015
29 CFR 1910.0151 C11$3,665Nov 2015Nov 2015
29 CFR 1910.1200 H0111—Nov 2015Nov 2015

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

44th

Below average violations in NAICS 3335 within IL. Peer group: 197 employers. This establishment has 4 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
84th
peer median: $2,765
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for CJT KOOLCARB, INC.. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR
1.2
BLS SOII 2024
Industry avg DART
0.5
BLS SOII 2024
Self-reported TRIR
—
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CJT KOOLCARB, INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
10 years ago

No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CJT KOOLCARB, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for CJT KOOLCARB, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CJT KOOLCARB, INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CJT KOOLCARB, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CJT KOOLCARB, INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CJT KOOLCARB, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$253K
Awards
361
Top agency
General Services Administration
$253K
Largest awards (top 50 of 361)
  • General Services Administration
    TAS::97 4930::TAS DRILL, TWIST (SOLID CARBIDE): IAW AMERICAN SOCIE TY OF MECHANICAL ENGINEERS (ASME) B94.11M-1993. CUTTING END STYLE: GENERAL PURPOSE DRILL SZ: 1/2 INCH MATERIAL: SOLID CARBIDE, U.S. INDUSTRY CLA SSIFICATION - C2 FLUTE LENGTH: 3 INCHES OVERALL LENGTH: 4-3/4 INCHES POINT TYPE: CONVENTIONAL PO INT ANGLE:- 118 DEGREES SHANK STYLE: STRAIGHT RO UND CUTTING DIRECTION: RIGHT-HAND FLUTE QUANTITY : 2 (PARTIAL DESCRIPTION)
    contract · Last action 2010-03-29
    $14,400
  • General Services Administration
    TWIST DRILLS: MSP - 1,260
    contract · Last action 2010-09-21
    $11,442
  • General Services Administration
    TWIST DRILLS: MSP - 375
    contract · Last action 2008-08-25
    $5,200
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2011-07-04
    $3,832
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2010-01-04
    $3,750
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-03
    $3,205
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-01-10
    $2,300
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-10-03
    $2,173
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2009-03-31
    $2,095
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2008-06-12
    $2,008
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2011-07-01
    $2,005
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2008-10-30
    $1,979
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-15
    $1,975
  • General Services Administration
    DRILL, TWIST (SOLID CARBIDE): IAW AMERICAN SOCIE TY OF MECHANICAL ENGINEERS (ASME) B94.11M-1993. CUTTING END STYLE: GENERAL PURPOSE DRILL SZ: 1/2 INCH MATERIAL: SOLID CARBIDE, U.S. INDUSTRY CLA SSIFICATION - C2 FLUTE LENGTH: 3 INCHES OVERALL LENGTH: 4-3/4 INCHES POINT TYPE: CONVENTIONAL PO INT ANGLE:- 118 DEGREES SHANK STYLE: STRAIGHT RO UND CUTTING DIRECTION: RIGHT-HAND FLUTE QUANTITY : 2 (PARTIAL DESCRIPTION)
    contract · Last action 2009-07-06
    $1,800
  • General Services Administration
    TWIST DRILLS: MSP - 718
    contract · Last action 2008-02-08
    $1,789
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2010-12-16
    $1,789
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2009-10-05
    $1,746
  • General Services Administration
    TAS::47 4534 001::TAS TWIST DRILLS: MSP - 1,050
    contract · Last action 2010-09-29
    $1,737
  • General Services Administration
    (INDUSTRIAL GRADE C-2 CARBIDE TIPPEDRILL, TWIST (CARBIDE TIPPED): IAW AMERICAN SOCIETY OF MECHAN ICA
    contract · Last action 2008-09-19
    $1,730
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2008-10-16
    $1,644
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2011-02-16
    $1,573
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2010-03-05
    $1,571
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2009-07-14
    $1,542
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2012-03-27
    $1,511
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2012-01-24
    $1,511
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2008-12-17
    $1,494
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2008-09-05
    $1,456
  • General Services Administration
    TWIST DRILLS: MSP - 718
    contract · Last action 2008-09-19
    $1,420
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2011-08-19
    $1,419
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2007-11-07
    $1,397
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2009-12-08
    $1,394
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2007-10-03
    $1,388
  • General Services Administration
    TWIST DRILLS: MSP - 375
    contract · Last action 2010-03-09
    $1,383
  • General Services Administration
    TAS::97 4930::TAS DRILL, TWIST (SOLID CARBIDE): IAW AMERICAN SOCIE TY OF MECHANICAL ENGINEERS (ASME) B94.11M-1993. CUTTING END STYLE: GENERAL PURPOSE DRILL SZ: 1/2 INCH MATERIAL: SOLID CARBIDE, U.S. INDUSTRY CLA SSIFICATION - C2 FLUTE LENGTH: 3 INCHES OVERALL LENGTH: 4-3/4 INCHES POINT TYPE: CONVENTIONAL PO INT ANGLE:- 118 DEGREES SHANK STYLE: STRAIGHT RO UND CUTTING DIRECTION: RIGHT-HAND FLUTE QUANTITY : 2 (PARTIAL DESCRIPTION)
    contract · Last action 2010-04-13
    $1,383
  • General Services Administration
    TWIST DRILLS: MSP - 718
    contract · Last action 2009-07-29
    $1,363
  • General Services Administration
    TWIST DRILLS: MSP - 375
    contract · Last action 2008-08-25
    $1,352
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2008-02-19
    $1,344
  • General Services Administration
    TWIST DRILLS: MSP - 718
    contract · Last action 2008-09-08
    $1,314
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2008-08-13
    $1,310
  • General Services Administration
    (INDUSTRIAL GRADE C-2 CARBIDE TIPPEDRILL, TWIST (CARBIDE TIPPED): IAW AMERICAN SOCIETY OF MECHAN ICAL ENGINEERS (ASME) B94.11M-1993. JOBBERS LENG TH, GENERAL PURPOSE, CARBIDE TIPPED (INDUSTRIAL GRADE C-2 CARBIDE TIPPED CUTTING EDGES) CUTTING DIAMETER: 7/16 INCH FLUTE LENGTH: 4-1/16 INCHES OVERALL LENGTH: 5-1/2 INCHES SHANK STYLE: STRAIG HT ROUND SHANK DIAMETER: 7/16 INCH CUTTING DIREC TION: RIGHT-HAND MATERIAL: HIGH SPEED STEEL POIN T TYPE: CONVENTIONAL POINT ANGLE: 118 DEGREES FL UTE QUANTITY: 2. (PARTIAL DESCRIPTION)
    contract · Last action 2009-07-14
    $1,298
  • General Services Administration
    (INDUSTRIAL GRADE C-2 CARBIDE TIPPEDRILL, TWIST (CARBIDE TIPPED): IAW AMERICAN SOCIETY OF MECHAN ICA
    contract · Last action 2009-02-06
    $1,298
  • General Services Administration
    TAS::47 4534 001::TAS TWIST DRILLS: MSP - 1,883
    contract · Last action 2010-06-15
    $1,295
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2009-07-24
    $1,281
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2008-04-08
    $1,280
  • General Services Administration
    TWIST DRILLS: MSP - 1,883
    contract · Last action 2008-02-15
    $1,280
  • General Services Administration
    TWIST DRILLS: MSP - 718
    contract · Last action 2008-12-22
    $1,264
  • General Services Administration
    DRILL, TWIST (SOLID CARBIDE): IAW AMERICAN SOCIE TY OF MECHANICAL ENGINEERS (ASME) B94.11M-1993. CUTTING END STYLE: GENERAL PURPOSE DRILL SZ: 1/2 INCH MATERIAL: SOLID CARBIDE, U.S. INDUSTRY CLA SSIFICATION - C2 FLUTE LENGTH: 3 INCHES OVERALL LENGTH: 4-3/4 INCHES POINT TYPE: CONVENTIONAL PO INT ANGLE:- 118 DEGREES SHANK STYLE: STRAIGHT RO UND CUTTING DIRECTION: RIGHT-HAND FLUTE QUANTITY : 2 (PARTIAL DESCRIPTION)
    contract · Last action 2009-08-26
    $1,254
  • General Services Administration
    TWIST DRILLS: MSP - 1,050
    contract · Last action 2008-08-13
    $1,250
  • General Services Administration
    (INDUSTRIAL GRADE C-2 CARBIDE TIPPEDRILL, TWIST (CARBIDE TIPPED): IAW AMERICAN SOCIETY OF MECHAN ICAL ENGINEERS (ASME) B94.11M-1993. JOBBERS LENG TH, GENERAL PURPOSE, CARBIDE TIPPED (INDUSTRIAL GRADE C-2 CARBIDE TIPPED CUTTING EDGES) CUTTING DIAMETER: 7/16 INCH FLUTE LENGTH: 4-1/16 INCHES OVERALL LENGTH: 5-1/2 INCHES SHANK STYLE: STRAIG HT ROUND SHANK DIAMETER: 7/16 INCH CUTTING DIREC TION: RIGHT-HAND MATERIAL: HIGH SPEED STEEL POIN T TYPE: CONVENTIONAL POINT ANGLE: 118 DEGREES FL UTE QUANTITY: 2. (PARTIAL DESCRIPTION)
    contract · Last action 2009-11-04
    $1,246
  • General Services Administration
    TAS::47 4534 001::TAS TWIST DRILLS: MSP - 1,883
    contract · Last action 2010-04-29
    $1,222

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2012-07-31. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2015-08-11Complaint44$11,000

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in cutting tool and machine tool accessory manufacturing within IL, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CJT KOOLCARB, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CJT KOOLCARB, INC.'s OSHA violation history?
CJT KOOLCARB, INC. has 1 OSHA inspection on record with 4 violations and $11,000 in total penalties.
How does CJT KOOLCARB, INC.'s safety record compare to its industry?
CJT KOOLCARB, INC. operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2.