Establishment profile
CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP
2711 CAVANAUGH ROAD, FORT SMITH, AR, 72906
332710 — Machine Shops
Summary
CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP has accumulated 16 OSHA violations across 2 inspections over 17 years of recorded history, with $12,825 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 23 employers. Inspection frequency runs at the 73rd percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 16 citations in this view · $12,825 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1000 A02 | 1 | 1 | $2,250 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0134 D01 III | 1 | 1 | $2,250 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,800 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0215 A01 | 1 | 1 | $1,575 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $1,575 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0333 B02 II | 1 | 1 | $1,125 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0151 C | 1 | 1 | $1,125 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0147 C02 III | 1 | 1 | $1,125 | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0219 F01 | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0213 I01 | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0215 A02 | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.1000 E | 1 | 1 | — | Jun 2009 | Jun 2009 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Jun 2009 | Jun 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within AR. Peer group: 23 employers. This establishment has 16 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-03-24 | Referral | 4 | 3 | $4,500 | |
| 2009-03-10 | Complaint | 12 | 11 | $8,325 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within AR, ordered by federal enforcement volume:
- GLOVER MACHINE WORKS, INC.FORT SMITH — 1 federal enforcement record
- R. W. MFG. & CONST. CO., INC.STUTTGART — 1 federal enforcement record
- RAY'S WELDINGCORNING — 1 federal enforcement record
- KOPCO, INCFORT SMITH — 1 federal enforcement record
- TMC ENTERPRISES, INCLOWELL — 1 federal enforcement record
- PMC, CONSTRUCTION, INC.CROSSETT — 1 federal enforcement record
- C & C MACHINERY, INC.RUSSELLVILLE — 1 federal enforcement record
- D1 RESOURCES, INC.DANVILLE — 1 federal enforcement record
- LAKESIDE MACHINE SHOPHOT SPRINGS — 1 federal enforcement record
- WARRICK'S HYDRAULICS, INC.BENTON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in ARState-wide enforcement data
- Machine Shops in ARIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP's OSHA violation history?
- CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP has 2 OSHA inspections on record with 16 violations and $12,825 in total penalties.
- How does CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP's safety record compare to its industry?
- CIRCLE "R" MACHINE SHOP, DIVISION OF QUALSERV CORP operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.