Skip to main content

Establishment profile

CHRISTENSEN MACHINERY & SUPPLY CO INC

1101 56TH AVE, MENOMINEE, MI, 49858
423830Industrial Machinery and Equipment Merchant Wholesalers
EIN 381850427

Download as PDF →

OSHA inspections
2
over 12 years
Violations
19
$730 in penalties
Penalties
$730
$38 avg

Summary

CHRISTENSEN MACHINERY & SUPPLY CO INC has accumulated 19 OSHA violations across 2 inspections over 12 years of recorded history, with $730 in total assessed penalties.

The establishment sits in the 90th percentile for violations within its industry-state peer group of 356 employers. Inspection frequency runs at the 72nd percentile. The most recent enforcement activity was recorded 9 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CHRISTENSEN MACHINERY & SUPPLY CO INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.2 / yr · last 12 yrs
Violations
19
1.6 / yr
Penalties
$730
$38 avg / violation
37% serious63% other
Inspection trigger · planned
2 of 2

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 19 citations in this view · $730 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C07 IIIB11$125May 2014May 2014
29 CFR 4081.40040211$125May 2014May 2014
29 CFR 1910.0303 G02 I11$100May 2014May 2014
29 CFR 1910.0303 B0211$100May 2014May 2014
29 CFR 4081.00340711$100May 2014May 2014
29 CFR 4081.11150411$100May 2014May 2014
29 CFR 4081.012311$80May 2014May 2014
29 CFR 4081.012511May 2014May 2014
29 CFR 4081.21540111May 2014May 2014
29 CFR 4081.33080211May 2014May 2014
29 CFR 4081.33090411May 2014May 2014
29 CFR 1910.0110 F02 II11May 2014May 2014
29 CFR 4081.40070411May 2014May 2014
29 CFR 1910.0147 C07 IV11May 2014May 2014
29 CFR 1910.0304 G06 VIC111May 2014May 2014
29 CFR 1910.0305 B02 I11May 2014May 2014
29 CFR 1910.0305 G01 IV11May 2014May 2014
29 CFR 1910.1200 H0311May 2014May 2014
29 CFR 4081.00360111May 2014May 2014

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

90th

Worse on violations than most other employers in NAICS 4238 within MI. Peer group: 356 employers. This establishment has 19 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
61st
peer median: $400
Inspection frequency
72nd
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−0.9
TRIR
0.0
vs industry
−1.5

Reported for 30 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
1.5
BLS SOII 2024
Industry avg DART
0.9
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CHRISTENSEN MACHINERY & SUPPLY CO INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
9 years ago

No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CHRISTENSEN MACHINERY & SUPPLY CO INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CHRISTENSEN MACHINERY & SUPPLY CO INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CHRISTENSEN MACHINERY & SUPPLY CO INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CHRISTENSEN MACHINERY & SUPPLY CO INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CHRISTENSEN MACHINERY & SUPPLY CO INC. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
CHRISTENSEN MACHINERY & SUPPLY CO INC
1101 56TH AVE · MENOMINEE, MI, 49858
RCRANo Violation Identified00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Inspection history

DateTriggerViolationsSeriousPenalty
2016-11-21Planned0$0
2014-03-26Planned197$730

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in industrial machinery and equipment merchant wholesalers within MI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CHRISTENSEN MACHINERY & SUPPLY CO INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CHRISTENSEN MACHINERY & SUPPLY CO INC's OSHA violation history?
CHRISTENSEN MACHINERY & SUPPLY CO INC has 2 OSHA inspections on record with 19 violations and $730 in total penalties.
How does CHRISTENSEN MACHINERY & SUPPLY CO INC's safety record compare to its industry?
CHRISTENSEN MACHINERY & SUPPLY CO INC operates in the industrial machinery and equipment merchant wholesalers industry. The industry average Total Recordable Incident Rate (TRIR) is 1.5. CHRISTENSEN MACHINERY & SUPPLY CO INC's self-reported DART rate is 0 compared to an industry average of 0.9.