Skip to main content

Establishment profile

CHASE MANUFACTURING COMPANY

9 PENNSYLVANIA AVE., CORRY, PA, 16407
332119Metal Crown, Closure, and Other Metal Stamping (except Automotive)

Download as PDF →

OSHA inspections
7
over 30 years
Violations
43
$17,951 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
3 National Emphasis Program inspections

Summary

CHASE MANUFACTURING COMPANY has accumulated 43 OSHA violations across 7 inspections over 30 years of recorded history, with $17,951 in total assessed penalties.

The establishment sits in the 92nd percentile for violations within its industry-state peer group of 190 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 10 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CHASE MANUFACTURING COMPANY appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
7
0.2 / yr · last 30 yrs
Violations
43
1.4 / yr
Penalties
$17,951
$417 avg / violation
81% serious19% other
Inspection trigger · complaint
3 of 7
Inspection trigger · planned
3 of 7

86% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 31 citations in this view · $17,951 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II44$5,250Feb 1996Dec 2002
29 CFR 1910.0217 C01 I33$2,820Feb 1996Jan 2000
29 CFR 1910.0212 A0122$3,350Dec 2002Sep 2016
29 CFR 1910.0303 B0222$850Oct 1998Dec 2002
29 CFR 1910.0217 E01 I22$800Oct 1998Jan 2000
29 CFR 1910.0303 B0122$750Jan 2000Dec 2002
5A000122$650Feb 1996Dec 2002
29 CFR 1910.0305 B0122Oct 1998Dec 2002
29 CFR 1910.0217 B08 I11$800Jan 2000Jan 2000
29 CFR 1910.0252 A02 VIC11$731Aug 2005Aug 2005
29 CFR 1910.0219 F0111$600Dec 2002Dec 2002
29 CFR 1910.0147 C0111$450Dec 2002Dec 2002
29 CFR 1910.0217 B04 I11$400Oct 1998Oct 1998
29 CFR 1910.0219 D0111$400Oct 1998Oct 1998
29 CFR 1910.0305 G01 IIIA11$100Dec 2002Dec 2002
29 CFR 1910.0219 B0211Dec 2002Dec 2002
29 CFR 1910.0219 B0111Dec 2002Dec 2002
29 CFR 1910.0132 D0111Dec 2002Dec 2002
29 CFR 1910.0219 C02 I11Dec 2002Dec 2002
29 CFR 1910.0303 B01 II11Dec 2002Dec 2002

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

92nd

Worse on violations than most other employers in NAICS 3321 within PA. Peer group: 190 employers. This establishment has 43 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
86th
peer median: $4,191
Inspection frequency
86th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
3.4
vs industry
+0.9
TRIR
6.8
vs industry
+2.6

Reported for 28 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.2
BLS SOII 2024
Industry avg DART
2.5
BLS SOII 2024
Self-reported TRIR
6.8
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
3
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CHASE MANUFACTURING COMPANY. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
10 years ago

No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CHASE MANUFACTURING COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CHASE MANUFACTURING COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CHASE MANUFACTURING COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CHASE MANUFACTURING COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CHASE MANUFACTURING COMPANY. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
502255
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CHASE MANUFACTURING COMPANY. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2016-04-07Planned11$2,900
2005-06-24Referral11$731
2002-11-14Complaint1714$7,000
1999-10-19Complaint73$3,500
1998-10-05Planned0$0
1998-10-01Planned1413$3,420
1995-12-12Complaint33$400

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal crown, closure, and other metal stamping (except automotive) within PA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CHASE MANUFACTURING COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CHASE MANUFACTURING COMPANY's OSHA violation history?
CHASE MANUFACTURING COMPANY has 7 OSHA inspections on record with 43 violations and $17,951 in total penalties.
How does CHASE MANUFACTURING COMPANY's safety record compare to its industry?
CHASE MANUFACTURING COMPANY operates in the metal crown, closure, and other metal stamping (except automotive) industry. The industry average Total Recordable Incident Rate (TRIR) is 4.2. CHASE MANUFACTURING COMPANY's self-reported DART rate is 3.41 compared to an industry average of 2.5.