Establishment profile
CHAMPION TOOLING & MACHINING CO., INC.
3035 WHITEHALL RD., ANDERSON, SC, 29623
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
CHAMPION TOOLING & MACHINING CO., INC. has accumulated 48 OSHA violations across 7 inspections over 32 years of recorded history, with $29,285 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 146 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CHAMPION TOOLING & MACHINING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $29,285 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $1,135 | Mar 1994 | Jun 2008 |
| 29 CFR 1910.0217 C02 IB | 2 | 2 | $7,450 | Mar 1994 | Mar 1995 |
| 29 CFR 1910.0217 C03 III | 1 | 1 | $8,000 | Feb 1996 | Feb 1996 |
| 29 CFR 1910.0217 C01 B | 1 | 1 | $7,000 | Feb 1996 | Feb 1996 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $1,050 | Mar 1994 | Mar 1994 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $750 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0151 C | 1 | 1 | $750 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0217 D09 IV | 1 | 1 | $600 | Mar 1994 | Mar 1994 |
| 29 CFR 1910.0132 A | 1 | 1 | $600 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0217 B07 III | 1 | 1 | $560 | Feb 1996 | Feb 1996 |
| 29 CFR 1001.2 A | 1 | 1 | $350 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0217 B08 III | 1 | 1 | $280 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | $200 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $200 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0219 B01 | 1 | 1 | $120 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $120 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0304 G05 | 1 | 1 | $120 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0095 D01 | 1 | 1 | — | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0095 G01 | 1 | 1 | — | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Jul 2008 | Jul 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within SC. Peer group: 146 employers. This establishment has 48 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Nov 6, 1995 | MAINTENANCE,POWER PRESS,WORK RULES,CAUGHT BY,POINT OF OPERATION,LIGHT CURTAIN,HAND,CONTUSION | 1 | 1 | — | |
| Feb 9, 1995 | WORK RULES,POINT OF OPERATION,FOOT-POWERED PRESS,LIGHT CURTAIN,PUNCH PRESS,HAND,CONTUSION | 1 | 1 | — | |
| Feb 8, 1994 | POWER PRESS,WORK RULES,POINT OF OPERATION,HAND,UNGUARDED,PUNCTURE | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CHAMPION TOOLING & MACHINING CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2008-04-17 | Referral | 4 | — | $0 | |
| 2008-03-13 | Planned | 23 | 21 | $1,550 | |
| 2004-02-11 | Complaint | 3 | 1 | $525 | |
| 1995-11-21 | Accident | 4 | 1 | $15,560 | |
| 1995-03-01 | Accident | 1 | — | $7,000 | |
| 1994-02-15 | Accident | 10 | 3 | $2,550 | |
| 1993-12-08 | Complaint | 3 | 3 | $2,100 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within SC, ordered by federal enforcement volume:
- BLUE RIDGE TOOL & MACHINE CO., INC.EASLEY — 2 federal enforcement records
- WHITMAN MOLD, INC.COPE — 2 federal enforcement records
- ZELTWAGNER LPNORTH CHARLESTON — 1 federal enforcement record
- USA CARBIDE TOOLING, INC.SPARTANBURG — 1 federal enforcement record
- MIDLANDS TOOLING SYSTEMLUGOFF — 1 federal enforcement record
- JACO MACHINE & TOOL, INC.SPARTANBURG — 1 federal enforcement record
- SUPREME TOOL & DIE, INC.GREER — 1 federal enforcement record
- SENECA MACHINING, INC.SENECA — 1 federal enforcement record
- DRT POWER SYSTEMS - HOVISSIMPSONVILLE — 1 federal enforcement record
- UNITED TOOL AND MOLD, INC.EASLEY — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in SCState-wide enforcement data
- Special Die and in SCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CHAMPION TOOLING & MACHINING CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CHAMPION TOOLING & MACHINING CO., INC.'s OSHA violation history?
- CHAMPION TOOLING & MACHINING CO., INC. has 7 OSHA inspections on record with 48 violations and $29,285 in total penalties.
- How does CHAMPION TOOLING & MACHINING CO., INC.'s safety record compare to its industry?
- CHAMPION TOOLING & MACHINING CO., INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.