Establishment profile
CENTURY METAL SPINNING CO., INC.
430 MEYER RD., BENSENVILLE, IL, 60106
332710 — Machine Shops
EIN 363013414
Summary
CENTURY METAL SPINNING CO., INC. has accumulated 3 OSHA violations across 2 inspections over 17 years of recorded history, with $3,763 in total assessed penalties.
The establishment sits in the 48th percentile for violations within its industry-state peer group of 638 employers. Inspection frequency runs at the 53rd percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CENTURY METAL SPINNING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $3,763 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $3,500 | Aug 2020 | Aug 2020 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $263 | Nov 2008 | Nov 2008 |
| 29 CFR 1910.0147 C05 IID | 1 | 1 | — | Nov 2008 | Nov 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within IL. Peer group: 638 employers. This establishment has 3 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 26 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2020
Most frequent event: Caught in running equipment or machinery during maintenance, cleaning
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jun 23, 2020 | Caught in running equipment or machinery during maintenance, cleaning | Fingertip(s) | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jun 23, 2020 | Actuated,Amputated,Amputation,Caught Between,Fingertip,Fracture,Laceration,Lubricating,Working Alone | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CENTURY METAL SPINNING CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CENTURY METAL SPINNING CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CENTURY METAL SPINNING CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTURY METAL SPINNING CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CENTURY METAL SPINNING CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CENTURY METAL SPINNING CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseREQUIREMENT IS FOR THUNDER LINEAR LRIP UNITS (LOW RATE INITIAL PRODUCTION) TO SUPPORT SPM ORDNANCE SYSTEMScontract · Last action 2025-05-14$122,148
- Department of DefenseCONEScontract · Last action 2011-03-10$24,580
- Department of DefenseSHELLS; SPUN ALUMINUM OUTER AND INNERcontract · Last action 2008-06-27$16,333
- Department of DefenseCALIBRATION SHERE,20" W/ TETHER SPHERICcontract · Last action 2021-06-24$13,350
- Department of DefenseCALIBRATION SPHEREcontract · Last action 2011-01-11$7,845
- Department of DefenseSTAINLESS STEEL SPHEREScontract · Last action 2009-09-30$5,400
- Department of DefenseH2 TANK PR# 61-0485-17contract · Last action 2017-03-07$4,897
- Department of DefenseMACHINE SHOP BPAcontract · Last action 2025-03-07$0
- Department of DefenseBPA MASTER AGREEMENTcontract · Last action 2019-11-01$0
- Department of DefenseSUPPLIES / SUBASSEMBLIEScontract · Last action 2015-08-04$0
- Department of DefenseBPA SYNOPSIS HARDWARE AND COMPONENTS 12Q4140contract · Last action 2012-11-08$0
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2025-05-14. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2020-07-08 | Referral | 1 | 1 | $3,500 | |
| 2008-10-24 | Complaint | 2 | 1 | $263 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within IL, ordered by federal enforcement volume:
- MECHANICAL DEVICES COMPANYBLOOMINGTON — 3 federal enforcement records
- RIVERSTONE GROUP, INC.ROCK ISLAND — 3 federal enforcement records
- AMTEC PRECISION PRODUCTS, INC.ELGIN — 3 federal enforcement records
- ALPHA MACHINE CORPORATIONTINLEY PARK — 2 federal enforcement records
- A.M. PRECISION MACHINING, INC.ELK GROVE VILLAGE — 2 federal enforcement records
- ACCURATE METAL FABRICATING, INC.CICERO — 2 federal enforcement records
- ABRASIVE-FORM, LLCBLOOMINGDALE — 2 federal enforcement records
- SERRA LASER PRECISION, LLCLIBERTYVILLE — 2 federal enforcement records
- MIDSTATE MANUFACTURING COMPANYGALESBURG — 2 federal enforcement records
- FASTENAL COMPANYLOVES PARK — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in ILState-wide enforcement data
- Machine Shops in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CENTURY METAL SPINNING CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CENTURY METAL SPINNING CO., INC.'s OSHA violation history?
- CENTURY METAL SPINNING CO., INC. has 2 OSHA inspections on record with 3 violations and $3,763 in total penalties.
- How does CENTURY METAL SPINNING CO., INC.'s safety record compare to its industry?
- CENTURY METAL SPINNING CO., INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. CENTURY METAL SPINNING CO., INC.'s self-reported DART rate is 0 compared to an industry average of 1.5.