Establishment profile
CENTRAL STATES TOOL & DIE WORK
4301-19 NO 30TH ST, Omaha, NE, 68111
Summary
CENTRAL STATES TOOL & DIE WORK has accumulated 17 OSHA violations across 2 inspections over 52 years of recorded history, with $1,325 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 10,677 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 52 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CENTRAL STATES TOOL & DIE WORK appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 17 distinct standards shown · 17 citations in this view · $1,325 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 1 | 1 | $550 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $135 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0107 C06 | 1 | 1 | $135 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0219 B01 | 1 | 1 | $110 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0107 B01 | 1 | 1 | $55 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $55 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0106 D04 III | 1 | 1 | $40 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0107 B05 I | 1 | 1 | $40 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0106 D04 IV | 1 | 1 | $40 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0106 D04 I | 1 | 1 | $40 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0252 C02 VI | 1 | 1 | $25 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0106 E02 IVD0 | 1 | 1 | $25 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0106 E06 I | 1 | 1 | $25 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0134 A02 | 1 | 1 | $25 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0219 I02 | 1 | 1 | $25 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0252 B04 IXC0 | 1 | 1 | — | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Feb 1974 | Feb 1974 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 10,677 employers. This establishment has 17 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CENTRAL STATES TOOL & DIE WORK. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CENTRAL STATES TOOL & DIE WORK. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 52+ years. Most recent activity: 52 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CENTRAL STATES TOOL & DIE WORK. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CENTRAL STATES TOOL & DIE WORK. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CENTRAL STATES TOOL & DIE WORK. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTRAL STATES TOOL & DIE WORK. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CENTRAL STATES TOOL & DIE WORK. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CENTRAL STATES TOOL & DIE WORK. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1974-03-26 | Follow-up | 0 | — | $0 | |
| 1974-01-28 | Planned | 17 | 1 | $1,325 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in NEState-wide enforcement data
About this data
This profile aggregates federal enforcement records on CENTRAL STATES TOOL & DIE WORK from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CENTRAL STATES TOOL & DIE WORK's OSHA violation history?
- CENTRAL STATES TOOL & DIE WORK has 2 OSHA inspections on record with 17 violations and $1,325 in total penalties.