Establishment profile
CENTERLINE TOOL CORP.
13521 FREEWAY DR., SANTA FE SPRINGS, CA, 90670
Summary
CENTERLINE TOOL CORP. has accumulated 14 OSHA violations across 2 inspections over 30 years of recorded history, with $4,280 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 119,021 employers. Inspection frequency runs at the 85th percentile. The most recent enforcement activity was recorded 30 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CENTERLINE TOOL CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $4,280 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 4070 A | 1 | 1 | $935 | Apr 1996 | Apr 1996 |
| 4184 B | 1 | 1 | $935 | Apr 1996 | Apr 1996 |
| 3203 B | 1 | 1 | $375 | Apr 1996 | Apr 1996 |
| 3314 G | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 3660 A | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 4650 E | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 5002 | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 5097 A | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 5194 E01 | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 6151 C01 | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 29 CFR 2340.0016 A | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 6151 C04 | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 29 CFR 2340.0023 | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
| 3241 D | 1 | 1 | $185 | Apr 1996 | Apr 1996 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 119,021 employers. This establishment has 14 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CENTERLINE TOOL CORP.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CENTERLINE TOOL CORP.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Mar 12, 1996 | DIE,AMPUTATED,EQUIPMENT FAILURE,POINT OF OPERATION,SHAFT,PRESS OPERATOR,PUNCH PRESS,HAND,RAM | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 30+ years. Most recent activity: 30 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CENTERLINE TOOL CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CENTERLINE TOOL CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CENTERLINE TOOL CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTERLINE TOOL CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CENTERLINE TOOL CORP.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1996-06-27 | Follow-up | 0 | — | $0 | |
| 1996-03-13 | Accident | 14 | 2 | $4,280 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in CAState-wide enforcement data
About this data
This profile aggregates federal enforcement records on CENTERLINE TOOL CORP. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CENTERLINE TOOL CORP.'s OSHA violation history?
- CENTERLINE TOOL CORP. has 2 OSHA inspections on record with 14 violations and $4,280 in total penalties.