Skip to main content
FastDOL

Establishment profile

C S OSBORNE & CO

125 JERSEY ST, Harrison, NJ, 07029

Download as PDF →

OSHA inspections
9
over 49 years
Violations
22
$4,570 in penalties
SVEP
YES
Severe violator program

Summary

C S OSBORNE & CO has accumulated 22 OSHA violations across 9 inspections over 49 years of recorded history, with $4,570 in total assessed penalties.

The establishment sits in the 98th percentile for violations within its industry-state peer group of 69,784 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 43 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

C S OSBORNE & CO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
9
0.2 / yr · last 49 yrs
Violations
22
0.4 / yr
Penalties
$4,570
$208 avg / violation
32% serious68% other
Inspection trigger · planned
6 of 9
Inspection trigger · follow-up
3 of 9

56% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 22 citations in this view · $4,570 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0215 A0233$540May 1977Aug 1981
29 CFR 1910.0219 E03 I22$1,060May 1977May 1979
29 CFR 1910.0219 D0111$630May 1979May 1979
29 CFR 1910.0217 B06 I11$630May 1979May 1979
29 CFR 1910.0217 C02 IA11$630May 1979May 1979
29 CFR 1910.0095 A11$450Aug 1977Aug 1977
29 CFR 1910.0215 A0411$270May 1979May 1979
29 CFR 1910.0213 H0111$180May 1977May 1977
29 CFR 1910.0219 E01 I11$180May 1977May 1977
29 CFR 1910.0157 E0311—Aug 1981Aug 1981
29 CFR 1910.0212 A0411—Aug 1981Aug 1981
29 CFR 1910.0212 A0511—Aug 1981Aug 1981
29 CFR 1910.0095 B0311—Aug 1979Aug 1979
29 CFR 1910.0309 A 02504511—May 1977May 1977
29 CFR 1910.0022 A0311—May 1977May 1977
29 CFR 1910.0024 F11—May 1977May 1977
29 CFR 1910.0157 A0311—May 1977May 1977
29 CFR 1910.0215 B0911—May 1977May 1977
29 CFR 1910.0022 A0111—May 1977May 1977

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

98th

Worse on violations than nearly every other employer. Peer group: 69,784 employers. This establishment has 22 OSHA violations; peer median is 1.

Fewer violationsMore violations
Penalty percentile
96th
peer median: $0
Inspection frequency
99th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for C S OSBORNE & CO. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Planned
6
Follow-up
3

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for C S OSBORNE & CO. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
43 years ago

No federal enforcement activity has been recorded against this establishment in 43+ years. Most recent activity: 43 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for C S OSBORNE & CO. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for C S OSBORNE & CO. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for C S OSBORNE & CO. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for C S OSBORNE & CO. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for C S OSBORNE & CO. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for C S OSBORNE & CO. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$55K
Awards
428
Top agency
General Services Administration
$55K
Largest awards (top 50 of 428)
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE, GROMMET INSERTING: DROP FORGED ST EEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGR AL DIE. DIAMETER OF HOLE WHEN INSERTED 7/16 INCH . C. S. OSBORNE AND COMPANY, PN 217-3. (PARTIAL DESCRIPTION)
    contract · Last action 2010-09-28
    $796
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: GROMMET INSERT ING PUNCH AND DIE DROP FORGED STEEL; DESIGNED FO R
    contract · Last action 2008-06-04
    $718
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: GROMMET INSERT ING PUNCH AND DIE DROP FORGED STEEL; DESIGNED FO R
    contract · Last action 2008-06-04
    $718
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 63
    contract · Last action 2010-09-28
    $696
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 88
    contract · Last action 2010-09-28
    $696
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 55
    contract · Last action 2010-09-29
    $676
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 55
    contract · Last action 2010-09-29
    $635
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 57
    contract · Last action 2010-09-28
    $635
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 68
    contract · Last action 2010-09-28
    $635
  • General Services Administration
    TAS::17 1106::TAS AWL, SADDLER' S PAD: TYPE: AWL, SADDLER' S PAD OVERALL LENGTH: 8" BLADE LENGTH: 4" BLADE QUANTITY: 1 HANDLE MATERIAL: WOOD OR PLASTIC (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-07-27
    $630
  • General Services Administration
    TAS::17 1106::TAS AWL, SADDLER' S PAD: TYPE: AWL, SADDLER' S PAD OVERALL LENGTH: 8" BLADE LENGTH: 4" BLADE QUANTITY: 1 HANDLE MATERIAL: WOOD OR PLASTIC (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-04-23
    $630
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: GROMMET INSERT ING PUNCH AND DIE DROP FORGED STEEL; DESIGNED FO R
    contract · Last action 2009-05-25
    $591
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: TYPE: PUNCH AN D DIE, GROMMET INSERTING SZ DESIGNATOR: 15 GROMM ET
    contract · Last action 2009-05-28
    $516
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 78
    contract · Last action 2008-12-22
    $458
  • General Services Administration
    RIVET SET, HAND: IAW GSA PURCHASE DESCRIPTION 51 20-00-222-3662, DATED 08/21/98. SZ NUMBER:1 TYPE :
    contract · Last action 2008-02-15
    $457
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE, GROMMET INSERTING: DROP FORGED ST EEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGR AL DIE. DIAMETER OF HOLE WHEN INSERTED 7/16 INCH . C. S. OSBORNE AND COMPANY, PN 217-3. (PARTIAL DESCRIPTION)
    contract · Last action 2010-09-07
    $455
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 68
    contract · Last action 2008-06-13
    $443
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED ST EEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGR AL
    contract · Last action 2008-10-09
    $431
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE, GROMMET INSERTING: GROMMET INSERT ING PUNCH AND DIE DROP FORGED STEEL; DESIGNED FO R EYELET GROMMET. DIAMETER OF HOLE WHEN INSERTED 7/16 INCH. (PARTIAL DESCRIPTION)
    contract · Last action 2010-08-16
    $417
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 88
    contract · Last action 2010-09-07
    $398
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 63
    contract · Last action 2010-09-07
    $398
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 88
    contract · Last action 2009-06-30
    $390
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 55
    contract · Last action 2010-09-07
    $386
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 68
    contract · Last action 2010-09-08
    $363
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 57
    contract · Last action 2010-09-08
    $363
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 55
    contract · Last action 2010-09-07
    $363
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING: SEE DESCRIPTION IN BPA
    contract · Last action 2010-08-16
    $355
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 88
    contract · Last action 2008-10-09
    $354
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 63
    contract · Last action 2008-10-09
    $354
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 55
    contract · Last action 2008-10-09
    $343
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 55
    contract · Last action 2008-12-17
    $339
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 63
    contract · Last action 2010-08-16
    $332
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: TYPE: PUNCH AN D DIE, GROMMET INSERTING SZ DESIGNATOR: 5 GROMME T TYPE FOR WHICH DESIGNED: EYELET (PARTIAL DESCR IPTION) DANIEL F YOUNG INCORPORATED TELE 718 656 8484 EXT 6217 176-20 147TH AVE FAX 718 656 841 JAMAICA NY 11434-5418
    contract · Last action 2009-08-18
    $331
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING MSP: 57
    contract · Last action 2008-10-09
    $323
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: SZ DESIGNAOR:6 GROMMET TYPE FOR WHICH DESIGNED EYELET C. S. OSBORNE&CO PN: 216-6 OR EQUAL (PARTIAL DESCRIPTION)
    contract · Last action 2011-03-17
    $307
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE, GROMMET INSERTING: GROMMET INSERT ING PUNCH AND DIE DROP FORGED STEEL; DESIGNED FO R EYELET GROMMET. DIAMETER OF HOLE WHEN INSERTED 7/16 INCH. (PARTIAL DESCRIPTION)
    contract · Last action 2010-06-21
    $303
  • General Services Administration
    TAS::97 4930::TAS PUNCH AND DIE GROMMET INSERTING MSP: 78
    contract · Last action 2010-08-16
    $257
  • General Services Administration
    AWL, SADDLER' S PAD: TYPE: AWL, SADDLER' S PAD OVERALL LENGTH: 8" BLADE LENGTH: 4" BLADE QUANTITY: 1 HANDLE MATERIAL: WOOD OR PLASTIC (PARTIAL DESCRIPTION)
    contract · Last action 2009-09-29
    $252
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED ST EEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGR AL
    contract · Last action 2008-12-19
    $251
  • General Services Administration
    TAS::17 1806::TAS PUNCH AND DIE GROMMET INSERTING: SEE DESCRIPTION IN BPA
    contract · Last action 2010-09-22
    $237
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: SZ DESIGNAOR:6 GROMMET TYPE FOR WHICH DESIGNED EYELET C. S. OSBORNE&CO PN: 216-6 OR EQUAL (PARTIAL DESCRIPTION)
    contract · Last action 2011-05-10
    $230
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: SZ DESIGNAOR:6 GROMMET TYPE FOR WHICH DESIGNED EYELET C. S. OSBORNE&CO PN: 216-6 OR EQUAL (PARTIAL DESCRIPTION)
    contract · Last action 2011-03-17
    $230
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED ST EEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGR AL DIE. DIAMETER OF HOLE WHEN INSERTED 7/16 INCH . C. S. OSBORNE AND COMPANY, PN 217-3 OR EQUAL. (PARTIAL DESCRIPTION)
    contract · Last action 2010-12-13
    $228
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED ST EEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGR AL DIE. DIAMETER OF HOLE WHEN INSERTED 7/16 INCH . C. S. OSBORNE AND COMPANY, PN 217-3. (PARTIAL DESCRIPTION)
    contract · Last action 2010-02-15
    $228
  • General Services Administration
    HAMMER, HAND P/N:237 EXPEDITE
    contract · Last action 2008-03-17
    $223
  • General Services Administration
    PUNCH AND DIE GROMMET INSERTING: SEE DESCRIPTION IN BPA
    contract · Last action 2008-06-10
    $221
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED STEEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGRAL D
    contract · Last action 2008-08-26
    $215
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED STEEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGRAL D
    contract · Last action 2008-06-11
    $215
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: GROMMET INSERT ING PUNCH AND DIE DROP FORGED STEEL; DESIGNED FO R
    contract · Last action 2008-06-04
    $215
  • General Services Administration
    PUNCH AND DIE, GROMMET INSERTING: DROP FORGED STEEL; DESIGNED FOR SPUR GROMMET TYPE, WITH INTEGRAL D
    contract · Last action 2008-06-04
    $215

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2012-05-04. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
1983-02-03Planned0—$0
1981-08-13Planned4—$0
1980-03-27Follow-up0—$0
1979-07-06Planned1—$0
1979-05-15Planned64$3,700
1977-10-21Follow-up0—$0
1977-08-02Planned11$450
1977-06-09Follow-up0—$0
1977-04-14Planned102$420

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on C S OSBORNE & CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is C S OSBORNE & CO's OSHA violation history?
C S OSBORNE & CO has 9 OSHA inspections on record with 22 violations and $4,570 in total penalties.