Establishment profile
BLANDFORD MACHINE & TOOL CO., INC.
5604 FERN VALLEY RD, LOUISVILLE, KY, 40228
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
BLANDFORD MACHINE & TOOL CO., INC. has accumulated 20 OSHA violations across 6 inspections over 41 years of recorded history, with $885 in total assessed penalties.
The establishment sits in the 86th percentile for violations within its industry-state peer group of 65 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
BLANDFORD MACHINE & TOOL CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
83% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $885 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 C01 I | 1 | 1 | $375 | Aug 2010 | Aug 2010 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $150 | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0304 F05 VC7 | 1 | 1 | $150 | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $120 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $90 | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0178 L04III | 1 | 1 | — | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0178 L06 | 1 | 1 | — | Aug 2010 | Aug 2010 |
| 29 CFR 1910.0147 C02 IVB | 1 | 1 | — | Aug 2010 | Aug 2010 |
| 29 CFR 1910.1030 F02 IV | 1 | 1 | — | Aug 2010 | Aug 2010 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Nov 1988 | Nov 1988 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Nov 1988 | Nov 1988 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Nov 1988 | Nov 1988 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | Nov 1988 | Nov 1988 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Nov 1988 | Nov 1988 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0303 G01 I | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | — | Feb 1985 | Feb 1985 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within KY. Peer group: 65 employers. This establishment has 20 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for BLANDFORD MACHINE & TOOL CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-12-02 | Planned | 2 | — | $0 | |
| 2010-04-13 | Planned | 4 | 1 | $375 | |
| 1991-07-09 | Planned | 1 | 1 | $120 | |
| 1988-08-26 | Planned | 5 | — | $0 | |
| 1985-04-25 | Follow-up | 0 | — | $0 | |
| 1984-12-17 | Planned | 8 | 8 | $390 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within KY, ordered by federal enforcement volume:
- STEINKAMP MOULDING LTDERLANGER — 1 federal enforcement record
- ARTIFLEX MANUFACTURING LLCHATTON — 1 federal enforcement record
- POPP MACHINE & TOOL INCLOUISVILLE — 1 federal enforcement record
- SERVICE TOOL & DIE, INC.HENDERSON — 1 federal enforcement record
- B - H TOOLWORKS INCRICHMOND — 1 federal enforcement record
- LINCOLN TOOL AND DIE COMPANY INCORPORATEDSTANFORD — 1 federal enforcement record
- WILLHOITE TOOL COMPANY INCGEORGETOWN — 1 federal enforcement record
- MONTICELLO TOOL AND DIE INCWINDY — 1 federal enforcement record
- POLYCRAFT TOOL INCGEORGETOWN — 1 federal enforcement record
- PROFESSIONAL TOOL, INC.HOPKINSVILLE — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in KYState-wide enforcement data
- Special Die and in KYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on BLANDFORD MACHINE & TOOL CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is BLANDFORD MACHINE & TOOL CO., INC.'s OSHA violation history?
- BLANDFORD MACHINE & TOOL CO., INC. has 6 OSHA inspections on record with 20 violations and $885 in total penalties.
- How does BLANDFORD MACHINE & TOOL CO., INC.'s safety record compare to its industry?
- BLANDFORD MACHINE & TOOL CO., INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.