Establishment profile
BENNETT TOOL AND DIE LLC
3150 CHRYSLER ROAD, KANSAS CITY, KS, 66115
Operated by Bennett Tool and Die LLC · 1 of 2 establishments
332119 — Metal Crown, Closure, and Other Metal Stamping (except Automotive)
EIN 462298982
Summary
BENNETT TOOL AND DIE LLC has accumulated 10 OSHA violations across 2 inspections over 4 years of recorded history, with $40,113 in total assessed penalties.
The establishment sits in the 57th percentile for violations within its industry-state peer group of 15 employers. Inspection frequency runs at the 21st percentile. The most recent enforcement activity was recorded 4 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
BENNETT TOOL AND DIE LLC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $40,113 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $7,373 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $6,320 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0253 B04 I | 1 | 1 | $5,267 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $4,213 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $4,213 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0243 C01 II A | 1 | 1 | $4,213 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0303 G01 | 1 | 1 | $3,511 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | $2,896 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0334 A02 I | 1 | 1 | $2,106 | Dec 2021 | Dec 2021 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Dec 2021 | Dec 2021 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3321 within KS. Peer group: 15 employers. This establishment has 10 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 38 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for BENNETT TOOL AND DIE LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 4+ years. Most recent activity: 4 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for BENNETT TOOL AND DIE LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for BENNETT TOOL AND DIE LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for BENNETT TOOL AND DIE LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for BENNETT TOOL AND DIE LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for BENNETT TOOL AND DIE LLC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for BENNETT TOOL AND DIE LLC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2021-10-19 | Planned | 9 | 5 | $37,217 | |
| 2021-10-19 | Planned | 1 | — | $2,896 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
BENNETT TOOL AND DIE LLC is one of 2 establishments rolled up under the parent organization Bennett Tool and Die LLC.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Bennett Tool and Die LLC across all 2 of its tracked locations is viewable on the parent profile.
Other locations under this parent
Other establishments operated by Bennett Tool and Die LLC, ordered by federal enforcement volume:
- BENNETT TOOL & DIE CO INCNASHVILLE, TN — 1 federal enforcement record
Related searches
- All Bennett Tool and Die LLC locationsParent rollup
- Metal Crown, Closure, and Other Metal Stamping (except Automotive)All employers in this industry
- Employers in KSState-wide enforcement data
- Metal Crown, Closure, in KSIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on BENNETT TOOL AND DIE LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Bennett Tool and Die LLC, which operates 2 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is BENNETT TOOL AND DIE LLC's OSHA violation history?
- BENNETT TOOL AND DIE LLC has 2 OSHA inspections on record with 10 violations and $40,112.9 in total penalties.
- How does BENNETT TOOL AND DIE LLC's safety record compare to its industry?
- BENNETT TOOL AND DIE LLC operates in the metal crown, closure, and other metal stamping (except automotive) industry. The industry average Total Recordable Incident Rate (TRIR) is 4.2. BENNETT TOOL AND DIE LLC's self-reported DART rate is 10.26 compared to an industry average of 2.5.