Skip to main content

Establishment profile

ATLAS MANUFACTURING

2950 WEEKS AV SE, MINNEAPOLIS, MN, 55414
332322Sheet Metal Work Manufacturing

Download as PDF →

OSHA inspections
3
over 24 years
Violations
10
$3,115 in penalties
Penalties
$3,115
$312 avg

Summary

ATLAS MANUFACTURING has accumulated 10 OSHA violations across 3 inspections over 24 years of recorded history, with $3,115 in total assessed penalties.

The establishment sits in the 62nd percentile for violations within its industry-state peer group of 478 employers. Inspection frequency runs at the 53rd percentile. The most recent enforcement activity was recorded 20 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ATLAS MANUFACTURING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.1 / yr · last 24 yrs
Violations
10
0.4 / yr
Penalties
$3,115
$312 avg / violation
90% serious10% other
Inspection trigger · planned
3 of 3

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $3,115 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II11$630Nov 2005Nov 2005
29 CFR 1910.0217 C01 I11$525Nov 2005Nov 2005
29 CFR 1910.0106 E06 II11$420Nov 2005Nov 2005
29 CFR 1910.0217 E0311$315Nov 2005Nov 2005
29 CFR 1910.0147 C04 I11$315Nov 2005Nov 2005
29 CFR 1910.0217 E01 I11$315Nov 2005Nov 2005
29 CFR 1910.0151 C11$280Jan 2002Jan 2002
29 CFR 1910.0219 B0111$210Jan 2002Jan 2002
29 CFR 1910.0305 G02 III11$105Nov 2005Nov 2005
29 CFR 1910.0217 C05 I11Nov 2005Nov 2005

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

62nd

Above average violations in NAICS 3323 within MN. Peer group: 478 employers. This establishment has 10 OSHA violations; peer median is 7.

Fewer violationsMore violations
Penalty percentile
65th
peer median: $1,846
Inspection frequency
53rd
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ATLAS MANUFACTURING. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.3
BLS SOII 2024
Industry avg DART
1.9
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ATLAS MANUFACTURING. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
20 years ago

No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ATLAS MANUFACTURING. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ATLAS MANUFACTURING. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ATLAS MANUFACTURING. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ATLAS MANUFACTURING. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ATLAS MANUFACTURING. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ATLAS MANUFACTURING. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2005-11-07Planned87$2,625
2002-11-19Planned0$0
2002-01-08Planned22$490

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in sheet metal work manufacturing within MN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ATLAS MANUFACTURING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ATLAS MANUFACTURING's OSHA violation history?
ATLAS MANUFACTURING has 3 OSHA inspections on record with 10 violations and $3,115 in total penalties.
How does ATLAS MANUFACTURING's safety record compare to its industry?
ATLAS MANUFACTURING operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3.