Skip to main content

Establishment profile

ATA FINISHING CORP

8225 KIMBALL AVENUE, SKOKIE, IL, 60076
332813Electroplating, Plating, Polishing, Anodizing, and Coloring

Download as PDF →

OSHA inspections
6
over 46 years
Violations
12
$3,790 in penalties
Penalties
$3,790
$316 avg
Accident investigations on record
2 National Emphasis Program inspections

Summary

ATA FINISHING CORP has accumulated 12 OSHA violations across 6 inspections over 46 years of recorded history, with $3,790 in total assessed penalties.

The establishment sits in the 69th percentile for violations within its industry-state peer group of 299 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 2 months ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ATA FINISHING CORP appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
6
0.1 / yr · last 46 yrs
Violations
12
0.3 / yr
Penalties
$3,790
$316 avg / violation
42% serious58% other
Inspection trigger · planned
6 of 6

50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 12 citations in this view · $3,790 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0022 C11$1,400Nov 2014Nov 2014
29 CFR 1910.1200 F05 I11$1,120Nov 2014Nov 2014
29 CFR 1910.0133 A0111$1,120Nov 2014Nov 2014
29 CFR 1910.0094 D09 VII11$150Oct 1979Oct 1979
29 CFR 1910.1200 H03 IV11Nov 2014Nov 2014
29 CFR 1910.1026 D0111Nov 2014Nov 2014
29 CFR 1910.1200 F05 II11Nov 2014Nov 2014
29 CFR 1910.1200 E0111Jun 1996Jun 1996
29 CFR 1910.0038 A0111Jun 1996Jun 1996
29 CFR 1910.0038 A05 III11Jun 1996Jun 1996
29 CFR 1910.1200 H11Jun 1996Jun 1996
29 CFR 1904.0002 A11Oct 1979Oct 1979

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

69th

Above average violations in NAICS 3328 within IL. Peer group: 299 employers. This establishment has 12 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
56th
peer median: $2,730
Inspection frequency
86th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ATA FINISHING CORP. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
2.3
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
6

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ATA FINISHING CORP. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
2 months ago

Most recent federal enforcement activity recorded 2 months ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ATA FINISHING CORP. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ATA FINISHING CORP. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ATA FINISHING CORP. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ATA FINISHING CORP. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ATA FINISHING CORP. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
ATA FINISHING CORP
8225 NORTH KIMBALL AVENUE · SKOKIE, IL, 60076
AirRCRANo Violation Identified00Mar 2007View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ATA FINISHING CORP. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2026-04-21Planned0$0
2014-07-09Planned64$3,640
1996-05-23Planned4$0
1986-02-19Planned0$0
1983-06-10Planned0$0
1979-10-12Planned21$150

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in electroplating, plating, polishing, anodizing, and coloring within IL, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ATA FINISHING CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ATA FINISHING CORP's OSHA violation history?
ATA FINISHING CORP has 6 OSHA inspections on record with 12 violations and $3,790 in total penalties.
How does ATA FINISHING CORP's safety record compare to its industry?
ATA FINISHING CORP operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.