Summary
ANGLE MANUFACTURING INC has accumulated 20 OSHA violations across 3 inspections over 32 years of recorded history, with $5,250 in total assessed penalties.
The establishment sits in the 69th percentile for violations within its industry-state peer group of 227 employers. Inspection frequency runs at the 68th percentile. The most recent enforcement activity was recorded 21 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ANGLE MANUFACTURING INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 20 citations in this view · $5,250 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 E01 | 3 | 3 | $550 | Jun 1994 | Aug 2005 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $800 | Jun 1994 | Jun 1994 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $700 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $600 | Jun 1994 | Jun 1994 |
| 29 CFR 1910.0212 B | 1 | 1 | $600 | Jun 1994 | Jun 1994 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $600 | Jun 1994 | Jun 1994 |
| 29 CFR 1910.1030 C01 I | 1 | 1 | $500 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0305 A04 V | 1 | 1 | $500 | Jun 1994 | Jun 1994 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | $400 | Jun 1994 | Jun 1994 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0095 G01 | 1 | 1 | — | Aug 2005 | Aug 2005 |
| 29 CFR 9000.602 | 1 | 1 | — | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0095 L01 | 1 | 1 | — | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Aug 2005 | Aug 2005 |
| 29 CFR 1910.1030 F02 I | 1 | 1 | — | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0305 B02 | 1 | 1 | — | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0147 C01 | 1 | 1 | — | Jan 1999 | Jan 1999 |
| 29 CFR 1910.0151 B | 1 | 1 | — | Jun 1994 | Jun 1994 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3371 within TN. Peer group: 227 employers. This establishment has 20 OSHA violations; peer median is 10.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ANGLE MANUFACTURING INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ANGLE MANUFACTURING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 21+ years. Most recent activity: 21 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ANGLE MANUFACTURING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ANGLE MANUFACTURING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ANGLE MANUFACTURING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ANGLE MANUFACTURING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ANGLE MANUFACTURING INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2005-07-07 | Planned | 9 | 8 | $1,600 | |
| 1998-11-03 | Planned | 3 | — | $0 | |
| 1994-05-05 | Complaint | 8 | 6 | $3,650 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within TN, ordered by federal enforcement volume:
- FIVE RIVERS ELECTRONICS INNOVATIONS LLCJEFFERSON CITY — 1 federal enforcement record
Related searches
- NAICS 337All employers in this industry
- Employers in TNState-wide enforcement data
- Industry in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ANGLE MANUFACTURING INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ANGLE MANUFACTURING INC's OSHA violation history?
- ANGLE MANUFACTURING INC has 3 OSHA inspections on record with 20 violations and $5,250 in total penalties.