Establishment profile
ANCHOR FABRICATION
1200 LAWSON ROAD, FORT WORTH, TX, 76131
332322 — Sheet Metal Work Manufacturing
EIN 760695861
Summary
ANCHOR FABRICATION has accumulated 19 OSHA violations across 6 inspections over 33 years of recorded history, with $30,895 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 1,115 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ANCHOR FABRICATION appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 19 citations in this view · $30,895 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 I | 1 | 1 | $5,115 | Apr 2019 | Apr 2019 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $5,115 | Apr 2019 | Apr 2019 |
| 29 CFR 1910.0179 H04 | 1 | 1 | $3,780 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0022 D01 | 1 | 1 | $3,500 | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $3,000 | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $3,000 | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0178 L | 1 | 1 | $2,000 | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $1,620 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | $1,400 | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0157 C01 | 1 | 1 | $700 | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $525 | Apr 1993 | Apr 1993 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $440 | Apr 1993 | Apr 1993 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $440 | Apr 1993 | Apr 1993 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $260 | Apr 1993 | Apr 1993 |
| 29 CFR 1910.0037 B02 | 1 | 1 | — | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0157 C04 | 1 | 1 | — | Aug 2008 | Aug 2008 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Aug 2008 | Aug 2008 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | — | Apr 1993 | Apr 1993 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Apr 1993 | Apr 1993 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within TX. Peer group: 1,115 employers. This establishment has 19 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 290 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · May 2015
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| May 9, 2015 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), unspecified | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ANCHOR FABRICATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ANCHOR FABRICATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ANCHOR FABRICATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ANCHOR FABRICATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ANCHOR FABRICATION. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ANCHOR FABRICATION 1200 LAWSON RD · SAGINAW, TX, 76131 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-01-08 | Complaint | 2 | 2 | $10,230 | |
| 2013-05-30 | Follow-up | 0 | — | $0 | |
| 2012-12-14 | Complaint | 3 | 2 | $5,400 | |
| 2008-07-07 | Complaint | 8 | 5 | $13,600 | |
| 1999-03-01 | Programmed Other | 0 | — | $0 | |
| 1993-01-21 | Planned | 6 | 3 | $1,665 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within TX, ordered by federal enforcement volume:
- KLN STEEL PRODUCTSSAN ANTONIO — 3 federal enforcement records
- MCCORVEY SHEET METAL WORKS LPHOUSTON — 3 federal enforcement records
- M & M MANUFACTURING, INC.FORT WORTH — 3 federal enforcement records
- TOTAL METAL PRODUCTSDALLAS — 2 federal enforcement records
- M & M MANUFACTURING, LLCFORT WORTH — 2 federal enforcement records
- VASQ SHEETMETAL, LLCARLINGTON — 2 federal enforcement records
- GADUTEX, INC.HOUSTON — 2 federal enforcement records
- FLEXMASTER, U.S.A., INC.HOUSTON — 2 federal enforcement records
- ALL AXIS MACHININGDALLAS — 2 federal enforcement records
- THE PORTER COMPANYMANCHACA — 2 federal enforcement records
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in TXState-wide enforcement data
- Sheet Metal Work in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ANCHOR FABRICATION from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ANCHOR FABRICATION's OSHA violation history?
- ANCHOR FABRICATION has 6 OSHA inspections on record with 19 violations and $30,895 in total penalties.
- How does ANCHOR FABRICATION's safety record compare to its industry?
- ANCHOR FABRICATION operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3. ANCHOR FABRICATION's self-reported DART rate is 0.95 compared to an industry average of 1.9.